Land Pride AFM40 User Manual

ALL-FLEX MOweRs

All-Flex Mowers.

Our name says it all!

Maintaining a large area of grass in a picturesque setting
is a tough job. Look to our All-Flex Mowers to give you the
results you deserve. Lush turf-type grass can be demanding
on a mower, but with features found in our All-Flex Mowers,
you can take a wide cut and spend more time enjoying the
fruits of your labor.

Commercial duty components are used throughout the
All-Flex Mower. Built tough and rugged, yet with an air of
class to match the performance and results, you’ll be proud
to say you made the right choice!

AFM40 SERIES

40 - 70 HP — 14’, 16’

www.landpride.com

• 6’ 8” Transport width meets

12

city requirements

• Grease blade spindles without removing guards

• Wings automatically lock for safe
transport, release with pull rope

• 18” Deck tires with sealant
and roller bearings for long life

• 1 1/4” Blade overlap

• Single B-section belt per deck
with spring loaded belt tensioner

• Cat. 4 CV input driveline

• Cat. 2 wing drivelines with or without slip-clutches

• Anti-scalp rollers

• Rear discharge without chains. Chains collect moist
grass and drop it in unsightly clumps.

• 23” Transport tires offer excellent roading capabilities

• See page 2 for blade choices

• Wing decks discharge clippings away from the rear deck

• Wing deck rear wheels are non-castering; helps hold
mower on slopes

• Easily grease blade spindle at the front of each deck

• Single beam hitch and generous deck overlap virtually
eliminate skipping in “zero-turn” situations

Available in:

year

5

Limited

Gearbox Warranty

*

Gauge wheels feature
bolt in spindles for
ease of replacement,
and 18" tires leaving a
light weight footprint.

Easily access grease
zerks to keep
drivelines operating
efficiently.

The AFM is perfect for golf course maintenance, large
estates, city recreation areas and sports fields. Sleek enough
to get under trees and agile enough to turn on a dime, the
AFM Series is just right for all around maintenance. And the
quality of cut is the best feature of all.

The front corners of each deck are reinforced to protect against
hitting obstructions. Smooth outside deck construction saves
trees and other obstructions.

Anti-scalp rollers on nose and
trailing edges of decks protect
the deck as well as the turf.

Low deck pivot allows
for greater side to
side flotation on the
wing decks.

AFM4014

• 14' Cutting width

• Three 60" decks

• 6" Deck overlap for zero turn capabilities

• 18,396 fpm Blade tip speed

AFM4016

• 16' 8" Cutting width

• Three 72" decks

• 8" Deck overlap for zero-turn capabilities

• 18,340 fpm Blade tip speed

Over center release
easily takes tension off
the drive belts during
extended off time.

13