Land Pride Z60, Accuz Z52, Z52, Accuz Z60, Accuz Z72 User Manual
®
Accu-Z
Z52®, Z60® & Z72® Zero Turning Radius Mowers
19097
356-005M
Operator’s Manual
Read the Operator’s manual entirely. When
you see this symbol, the subsequent
!
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
© Copyright 2003 Printed
Cover photo may show optional equipment not supplied
with standard unit.
03/11/03
Table of Contents
Table of Contents
Land Pride
Important Safety Information . . . . . . . . . . . . . . . . . . .1
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . .6
Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . .6
Serial Number Plate. . . . . . . . . . . . . . . . . . . . . . . . .6
Further Assistance. . . . . . . . . . . . . . . . . . . . . . . . . .6
Section 1 Assembly and Set-Up . . . . . . . . . . . . . . . . .7
Control Lever and Seat Assembly . . . . . . . . . . . . . .7
Remote Air Cleaner Assembly. . . . . . . . . . . . . . . . .7
Optional Equipment Assemblies . . . . . . . . . . . . . . .8
Remote Air Cleaner Assembly . . . . . . . . . . . . . .8
Control Lever Extensions . . . . . . . . . . . . . . . . . .8
Accu-Vac Assembly. . . . . . . . . . . . . . . . . . . . . . .9
Mower Deck Preparation. . . . . . . . . . . . . . . . . . .9
Blower, Pulley and Pulley Cover Assembly. . . .10
Bagger Assembly . . . . . . . . . . . . . . . . . . . . . . .11
Front Lift and Weight Assembly. . . . . . . . . . . . .12
Section 2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . .13
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Ignition Switch. . . . . . . . . . . . . . . . . . . . . . . . . .13
Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . .13
Choke Control. . . . . . . . . . . . . . . . . . . . . . . . . .13
Control Levers. . . . . . . . . . . . . . . . . . . . . . . . . .13
Parking Brake. . . . . . . . . . . . . . . . . . . . . . . .14
Deck Clutch Switch. . . . . . . . . . . . . . . . . . . . . .14
Deck Lift Pedal . . . . . . . . . . . . . . . . . . . . . . . . .14
Instrumentation . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Electronic Hour Meter . . . . . . . . . . . . . . . . . . . .15
Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . .15
Safety Start Interlock System. . . . . . . . . . . . . . . . .15
Engine Starting . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Moving Mower with Stalled Engine . . . . . . . . . . . .16
Driving the Mower . . . . . . . . . . . . . . . . . . . . . . . . .17
Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
To Stop or Decrease Speed . . . . . . . . . . . . . . .17
To Increase Speed . . . . . . . . . . . . . . . . . . . . . .17
Operating Suggestions. . . . . . . . . . . . . . . . . . . . . .17
Mower Deck Operation . . . . . . . . . . . . . . . . . . . . .18
Operating Instructions . . . . . . . . . . . . . . . . . . . . . .19
Section 3 Adjustments. . . . . . . . . . . . . . . . . . . . . . . .20
Torque Values . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Steering Linkage . . . . . . . . . . . . . . . . . . . . . . . . . .20
Control Lever Neutral Adjustment. . . . . . . . . . .21
Control Lever Stops . . . . . . . . . . . . . . . . . . . . . . . 22
Reverse Spring Adjustment . . . . . . . . . . . . . . . . . 22
Steering Dampener. . . . . . . . . . . . . . . . . . . . . . . . 23
Control Lever Adjustment . . . . . . . . . . . . . . . . . . . 23
Park Brake Adjustment. . . . . . . . . . . . . . . . . . . . . 23
Hydraulic Pump Belt Adjustment . . . . . . . . . . . . . 25
Deck Drive Belt Adjustment . . . . . . . . . . . . . . . . . 25
Engine RPM Setting . . . . . . . . . . . . . . . . . . . . . . . 25
Deck Leveling and Height Adjustment . . . . . . . . . 25
Deck Level Adjustment. . . . . . . . . . . . . . . . . . . 26
Deck Cutting Height Adjustment. . . . . . . . . . . . . . 28
Anti-Scalp Rollers . . . . . . . . . . . . . . . . . . . . . . . . . 29
Section 4 Maintenance and Lubrication . . . . . . . . . 30
Maintenance Locations. . . . . . . . . . . . . . . . . . . . . 30
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . 31
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Torque Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Hour Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . 33
Access to Engine and Hydraulic Pumps. . . . . . . . 34
Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Engine Oil and Filter . . . . . . . . . . . . . . . . . . . . . . . 35
Engine Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Over Service . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ImproperInstallation . . . . . . . . . . . . . . . . . . . . . 36
Damaged Filter, Seals or Canister. . . . . . . . . . 37
Incorrect Air Filter Element. . . . . . . . . . . . . . . . 37
Engine Air Filter Service Procedure . . . . . . . . . . . 37
General Engine Maintenance . . . . . . . . . . . . . . . . 37
Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . . 38
Mower Blade Maintenance . . . . . . . . . . . . . . . . . . 38
Lift Jack and Weight Option . . . . . . . . . . . . . . . 38
Mower Blade Removal . . . . . . . . . . . . . . . . . . . . . 38
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Preparation of Engine for Storage. . . . . . . . . . . . . 39
New Season Preparation . . . . . . . . . . . . . . . . . . . 39
Section 5 Specifications and Capacities. . . . . . . . . 40
Section 6 Features and Benefits . . . . . . . . . . . . . . . 42
Section 7 Troubleshooting . . . . . . . . . . . . . . . . . . . . 43
Section 8 Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . 44
Torque Values Chart for Common Bolt Sizes . . . . 44
Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . . 44
Warranty Statement . . . . . . . . . . . . . . . . . . . . . . . 45
© Copyright 2003 All rights Reserved
LandPrideprovidesthispublication “as is” withoutwarrantyofanykind,either expressed or implied.While every precaution hasbeentaken in thepreparationof this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed fordamages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.
Land Pride and Accu-Z Razor are registered trademarks.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
03/11/03
Land Pride
▲
Important Safety Information
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Be Aware of Signal Words
A signal word designates a degree or
level of hazard seriousness. The
signal words are:
!
DANGER!
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme situations, typically for
machine components that, for
functional purposes, cannot be
guarded.
!
WARNING!
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may
also be used to alert against unsafe
practices.
!
CAUTION!
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
!
Keep Riders
Off Machinery
▲ Riders obstruct the operator’s
view, they could be struck by
foreign objects or thrown from the
machine.
▲ Never allow children to operate
equipment.
For Your Protection
▲ Thoroughly read and understand
the “Safety Label” section, read all
instructions noted on them.
OFF
Shutdown and Storage
▲ Put mower in park, turn off
engine, and remove the key.
▲ Store in an area where children
normally do not play.
ON
03/11/03
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
1
Land Pride
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Practice Safe Maintenance
▲ Understand procedure before
doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲ Work in a clean dry area.
▲ Do not grease or oil while in
operation.
▲ Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲ Remove buildup of grease, oil or
debris.
▲ Remove all tools and unused
parts before operation.
Safety at All Times
Thoroughly read and understand the
instructions given in this manual
beforeoperation. Refer to the “Safety
Label” section, read all instructions
noted on them.
▲ Operator should be familiar with
all functions of the unit.
▲ Operate mower from the driver’s
seat only.
▲ Do not leave mower unattended
with engine running.
▲ Dismounting from a moving
mower could cause serious injury
or death.
▲ Keep hands, feet, and clothing
away from power-driven parts.
▲ Wear snug fitting clothing to avoid
entanglement with moving parts.
▲ Make sure all persons are clear of
working area.
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
2
Land Pride
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire
extinguisher handy.
▲ Keep emergency numbers for
doctor, ambulance, hospital and
fire department near phone.
911
Wear
Protective Equipment
▲ Protective clothingand equipment
should be worn.
▲ Wear clothing and equipment
appropriate for the job. Avoid
loose fitting clothing.
▲ Prolonged exposure to loud noise
can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.
▲ Operating equipment safely
requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.
Avoid High
Pressure Fluids Hazard
▲ Escaping fluid under pressure can
penetratethe skin causing serious
injury.
▲ Avoid the hazard by relieving
pressure before disconnecting
hydraulic lines.
▲ Use a piece of paper or
cardboard, NOTBODYPARTS, to
check for suspected leaks.
▲ Wear protective gloves and safety
glasses or goggles when working
with hydraulic systems.
▲ If an accident occurs, see a
doctor immediately. Any fluid
injected into the skin must be
surgically removed within a few
hours or gangrene may result.
Safety Labels
1. Your mower comes equipped with all safety labels in place.
They were designed to help you safely operate your mower.
Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new labels
go to your Land Pride dealer.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
03/11/03
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
3
Important Safety Information
19097
Land Pride
838-303C
Danger: Battery
(Beneath Seat)
19097
19098
838-305C
Warning:Rollover Hazard(Beneath Bumper on Back ofFrame)
838-306C
Warning: Do not operate without deflector
19097
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
4
818-543C
Danger: Guard is missing
(Beneath foot pan on mower deck)
Land Pride
Important Safety Information
19057
838-307C
Warning: Moving Parts
(Both Sides)
19057
19097
838-308C
Warning: Rotating Blade
Hazard (Both Sides)
838-310C
Warning: General
03/11/03
838-399C
19057
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
Warning: Fuel
Imbedded in Fuel Tank
5
Introduction
Introduction
Land Pride
Land Pride welcomes you to the growing family of new
product owners.
This mower has been designed with care and built by
skilled workers using quality materials. Proper assembly,
maintenance, and safe operating practices will help you
get years of satisfactory use from the machine.
Application
The Accu-Z Razor®mowers from Land Pride are compact
in size and ideal for homeowner and commercial grass
maintenance . The Accu-Z is a true zero-turn mower:
When mowing alongside a building or landscaping, the
Accu-Z turns within its own width, allowing you to turn
away and not hit anything with the rear end. This makes it
the perfect choice for cemeteries, parks, recreational
areas, sports fields and schools where obstacles are
prevalent. An optional Vacuum Bagger, Mulching Kit and
Control Lever Extensions are also available. See
“Features and Benefits”, “Section 6” for additional
information.
Using This Manual
• This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator or Parts Manual contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge from our website at www.landpride.com
or printed by your dealer from the Land Pride Service &
Support Center CD-Rom.
Terminology:
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
NOTE:A special point of information that the operator
must be aware of before continuing.
IMPORTANT: A special point of inf ormation related to
its preceding topic. Land Pride’s intention is that this
information should be read and noted before
continuing.
The parts on your Accu-Z Mower have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your Accu-Z require
replacement parts go to your Land Pride Dealer.
IMPORTANT:
For parts and service for your engine contact your
nearest dealer or Call Customer Service Hotline.
Honda Engine Information:
Service Manual: P/N 61ZJ410Z
Owner’s Manual: P/N 31ZJ4620
Service Hotline: 1-770-497-6400
Kawasaki Engine Information:
Service Manual: P/N 99924-2045-02
Owner’s Manual: P/N 99920-2145-02
Service Hotline: 1-800-433-5640
Serial Number
Referto theFigure 1for thelocation ofyour serial number.
19097
Serial Number Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
mower.If forany reason youdo notunderstand anypart of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discussthe matter with your dealership service
managermaking sure he isaware ofany problemsyou
mayhaveand that he has had the opportunity to assist
you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write or E-mail to:
Owner Assistance
The Warranty Registration card should be filled out by the
dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the implement.
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
6
lpservicedept@landpride.com
Land Pride
Service Department
P.O. Box 5060
Salina, KS 674022-5060
E-mail address
Land Pride
Section 1 Assembly and Set-Up
Section 1
Assembly and Set-Up
Control Lever and Seat Assembly
The seat is removed for ease in shipping and the control
lever’s upper bolts and flat washers are removed and the
levers are rotated down.
Refer to Figure 1-1:
1. Install the standard seat (#1) (or the optional
suspension seat) to the seat pan (#2) using four 5/16”
nuts (#3) and four 5/16” flat washers (#4).
2. Connecttheswitchwires onthe mower withtheswitch
wires on the seat. Secure the switchwires to the seat
pan (#2) using three wire ties (#5).
3. Fliptheseat overinto theoperatingposition androtate
thecontrol leversup untilthe holesline upand replace
the bolts and flat washers.
Remote Air Cleaner Assembly
Refer to Figure 1-2:
1. Slide air cleaner clamp (#1) over air cleaner housing
(#2), position the clamp so the bolt holes are facing
down (away from the intake) and the notches on the
clamp fit in the notches on the housing.
2. Insert air cleaner element (#3) inside air cleaner
housing (#2) and attach housing end (#4) (with the
arrows pointing up). Place rubber grommet (#5) over
opening in housing end (#4).
3. Attach air cleaner intake cap (#6) to the air cleaner
housing (#2) using a hose clamp (#7).
4. Attach air cleaner hose (#8) to the air cleaner (#2)
using a hose clamp (#7).
20858
Seat Assembly
Figure 1-1
Refer To Figure 1-3:
5. Remove plastic cap from carburetor intake.
!
CAUTION!
Be careful to not allow any foreign material into the carburetor
while performing this assembly.
03/11/03
20862
Air Cleaner Assembly
Figure 1-2
Plastic Cap
20859
Carburetor Intake
Figure 1-3
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
7
Section 1 Assembly and Set-Up
Refer to Figure 1-4:
6. Insert the air cleaner hose through the hole in the air
cleaner hood and slide hose end over the carburetor
intake.
7. Secure air cleaner to the air cleaner hood with two 5/
16” bolts, four 5/16” flat washers and two 5/16” nuts.
8. Securehose to thecarburetor intakewith hoseclamp.
Land Pride
5/16” Bolt
Hose Clamp
Optional Equipment Assemblies
Remote Air Cleaner Assembly
Refer to Figure 1-2 page 7:
The remote air cleaner is standard equipment on mowers
with Serial No. 364548 and above.
However, it may be purchased as an option on mowers
with Serial No. 364547 and below.
Control Lever Extensions
Refer to Figure 1-5:
1. Install the Extensions (#4) as shown.
20860
Figure 1-4
Air Cleaner
19121
Control Lever Assembly
Figure 1-5
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
8
Land Pride
Section 1 Assembly and Set-Up
Accu-Vac Assembly
Refer to Figure 1-9 on page 12
Land Pride offers as an option an Accu-Vac Collection
System designed to collect mower clippings into two 30
gallon rubber containers mounted on the back of the
mower.
NOTE: Accu-Vac Collection System cannot be
mounted on Accu-Z mowers manufactured with
Honda engines. Use only with Kawasaki engines.
!
WARNING!
Do not operate Accu-Vac System without remote air cleaner setup or engine damage may occur.
!
WARNING!
Do not operate mower without deflector chute or Accu-Vac in
place.
Mower Deck Preparation
Refer to Figure 1-6:
Park the Accu-Z mower on a flat surface. Shut off the
ignition switch and remove the key from the switch.
Disconnect the negative battery cable.
Beforethe Accu-Vaccan be installed, the right side pulley
cover (4) and discharge chute assembly (1) must be
removed. Loosen the tensioner for the blade belt and
remove pulley (7). Parts 2, 3, 6 and 8 will be used to
assemble Accu-Vac.
NOTE:Retainall other partsas theywillbe re-installed
when the Accu-Vac is removed.
19907
03/11/03
Chute, Pulley and Pulley Cover Removal
Figure 1-6
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
9
Section 1 Assembly and Set-Up
Land Pride
Blower, Pulley and Pulley Cover Assembly
Refer to Figure 1-7:
1. Install double pulley (#13) with the bolt (#11) and
existing flat washer (#12) Torque bolt 65 - 75 lbs.
2. Reinstall blade drive belt on lower grove of pulley
(13).
3. Assemble bracket (#4) where the chute bracket was
assembled using the existing hardware (#2) and
(#3).
4. Assemble blower pivot (#5) with carriage bolt (#6)
and existing hardware (#7), (#8), (#9) and (#10).
5. Install blower (#1) on blower pivot and swing blower
around and secure to bracket with pin (#14) and hair
pin cotter (#15).
6. Install blower belt (#16) to double pulley and route it
as shown. (Belt must be on top pulley)
Blower
Drive Belt
20855
Blower Belt
7. Assemble pulley cover (#17) using existing knobs
(#18).
Route Beltto
TopPulley
Blower Assembly
Figure 1-7
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
10
Land Pride
Section 1 Assembly and Set-Up
Bagger Assembly
Refer to Figure 1-8:
NOTE: Accu-Vac Collection System cannot be
mounted on Accu-Z mowers manufactured with
Honda engines. Use only with Kawasaki engines.
1. Remove and retain rear bumper bolts (#3) and flat
washers (#4). Do not remove bumper.
2. Assemble left bracket (#1) and right bracket (#2)
through the same slots using the bolts and flat
washers retained from the bumper.
Damage will occur if:
Failure to install and/or adjust muffler exhaust deflector,
will result in damage to either grass catcher container or
mower.
With engine cool:
Install the muffler exhaust deflector onto current muffler
exhaust pipe.
Swivel deflector around so the exhaust is porting away
fromboth unit andbagger.Start mower and check air flow
out of deflector. Make sure hot exhaust air is not diverted
onto unit or bagger. Exhaust should be diverted out to
side.
Mark muffler exhaust pipe using hole in diverter.
Drill muffler exhaust pipe using #26 (.147) drill bit.
Muffler can cause burning. Muffler should be cool before proceeding.
3. Position muffler deflector (#5) on existing muffler
4. Install muffler deflector to existing exhaustand fasten
Important
!
CAUTION!
exhaust so that deflector is pointing away from the
plasticcontainers.Mark forholethroughdeflector (#5)
and drill hole for screw using a #26 (.147) drill bit.
with screw (#6) through hole in deflector and drilled
hole.
03/11/03
Bagger Brackets and Muffler Deflector Assembly
Figure 1-8
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
19910
11
Section 1 Assembly and Set-Up
5. Install bagger (#1) through brackets and secure with
pins (#2).
6. Assembleclamps (#3) on the ends of the bagger tube
(#4) and slide the tube over the bagger inlet and the
blower as shown in Figure 1-9 and tighten clamps.
Bagger Assembly
Figure 1-9
Land Pride
NOTE: Lubricant can be used when installing tube to
bagger so the tube will slide over bagger inlet easier.
Front Lift and Weight Assembly
(For Blade Service or Replacement)
IMPORTANT:Do not use jack to support mower while
working under the deck. Chock back wheels and
securely block unit up before working under the deck.
1. The front weight bracket(#1) will mount to the front of
the mower frame with the four u-bolts (#2) lock
washers(#3) and nuts (#4) onthe Z60 & Z72 mowers.
TheZ52 mounts with twou-bolts (#2) onthe right side
and one bolt (#7) and nut (#4) on the left side of
frame as shown in Figure 1-10.
2. Fill the weight (#5) with sand and secure to
weight bracket with bolts (#8), lock washers (#9)
and flat washers (#10).
3. Assemble jack (#6) to the jack mount on the
weight bracket.
19911
Front Lift and Weight Assembly
Figure 1-10
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 03/11/03
12
Z52 Left Side
19909
Land Pride
Section 2 Operation
Section 2
Operation
19058
1. Ignition Switch
2. Throttle Lever
3. Control Levers
4. Blade Engagement
Switch
5. Deck Lift Pedal
6. Hour Meter
7. Oil Pressure Light
8. Fuel Tanks
9. Hydraulic Reservoir
Accu Z Controls
Figure 2-1
Controls
For general location of the controls described in this
section, refer to Figure 2-1.
Ignition Switch
Refer to Figure 2-2:
A three position switch: off, run, and start. With key
inserted, rotate it clockwise to START position; release
key when engine starts, and switch will automatically
return to the RUN position.
Throttle Control
Refer to Figure 2-2:
A cable is linked to engine throttle for controlling engine
speed. Move lever forward to increase engine rpm, move
lever rearward to decrease engine rpm.
Choke Control
Refer to Figure 2-2:
A cable is linked to manually operate the engine choke.
When the lever is in the down position, the choke is in the
off(run) position. When the leveris pulled up, the choke is
in the on (start) position. DO NOT operate the machine in
the on (start) position.
10. Battery
11. Deck Adjusting Rod
12. Anti-Scalp Wheels
13. Discharge Chute
14. Left Belt/Pulley Cover
Oil Pressure
Light
Ignition Switch
Blade Engagement
Switch
19097
Control Panel
15. Right Belt/PulleyCover
16. Deck Height Indicator
17. Brake Switch
18. Choke Lever
Throttle
Choke
Figure 2-2
03/11/03
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
13
Loading...