Land Pride 700-033A User Manual

ST Back Screen
Assembly Instructions

Treker ST 00 & 10 Series

Before You Start

When you see this symbol, the subsequent
instructions and warnings are serious - follow

!

without exception. Your life and the lives of
others depend on it!

IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.

Your ST Back Screen is exclusively designed for your
Land Pride ST Treker. Please read these installation
instructions and your ST Treker Operator’s Manual
thoroughly before beginning. Especially read information
relating to safety concerns. Also included in the
Operator’s Manual is important information on operation,
adjustment, troubleshooting, and maintenance for this
attachment (some manual sections do not apply to all
accessories).

Manual No. 701-134M

Assembly Instructions

A detailed listing of parts for this accessory kit is provided
on page 2. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.

ALL DIRECTIONS REFERRING TO THE RIGHT AND
LEFT ARE WHEN THE OPERATOR IS ON THE
MACHINE.

General Information

These assembly instructions apply to the following ST
Back Screen Accessories listed below:

700-033A ST Back Screen

Further Assistance

Your dealer wants you to be satisfied with your new ST
Back Screen. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:

1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.

2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

1. Space the six 1-3/4" U-Clamps (#2) and the six 1-1/2"
U-Clamp Spacers (#3) on the roll cage.

2. Center the Back Screen (#1) in the inside of the roll
cage.

3. Attach the Back Screen (#1) to the roll cage with the
six 1-3/4" U-Clamps (#2) using six 5/16" x 2-1/2" bolts
(#4) and the six 1-1/2" U-Clamp Spacers (#3).

4. Make adjustments to the Back Screen (#1) alignment
as needed. Fully tighten attaching hardware at this time.

[e-mail]

© Copyright 2007 Printed

E-mail address

06/27/07

1

Listing of Parts

Kit No. 701-033A ST Back Screen

Item Part No. Part Description Qty

1 701-033A BACK SCREEN ST 1
2 UC134BLK 1 3/4" U-CLAMP 6
3 UCS112BLK 1 1/2" U-CLAMP SPACER 6
4 803-084C NUT HEX NYLOCK 5/16-18 PLT 6
5 802-709C RHSNB 5/16-18 X 2 1/2 PLT GR5

Land Pride

Corporate Office: P.O. Box 5060

Salina, Kansas 67402-5060 USA

www.landpride.com

2

Manual No. 701-134M 06/27/07

■