Land Pride 311-252M User Manual
Table of Contents
Rotary Tillers
RTA10 & RTA15 Series
RTA1042, RTA1050 & RTA1058
RTA1550 & RTA1558
22195
311-252M
Operator’s Manual
Read the Operator’s manual entirely.
When you see this symbol, the
subsequent instructions and
!
warnings are serious - follow without
exception. Your life and the lives of
others depend on it!
© Copyright 2008 Printed
Cover photo may show optional equipment not supplied
with standard unit.
10/13/08
Table of Contents
Table of Contents
Land Pride
Important Safety Information . . . . . . . . . . .1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . .1
Look For The Safety Alert Symbol . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . . . . .7
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 1 Assembly and Set-Up . . . . . . . . 8
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . 8
Hitch, Driveline Guard & Rear Chain . . . . . . . . . . . 8
Leg Stand Assembly . . . . . . . . . . . . . . . . . . . . . . .9
Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Driveline Installation . . . . . . . . . . . . . . . . . . . . . . . 10
Checking Driveline Minimum Length . . . . . . . . 10
Checking Driveline Maximum Length . . . . . . . 11
Section 2 Operating . . . . . . . . . . . . . . . . .12
General Notes for Field Operations . . . . . . . . . . . 12
Operating Check List . . . . . . . . . . . . . . . . . . . . 12
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating Instructions . . . . . . . . . . . . . . . . . . . . . 13
Section 3 Adjustments . . . . . . . . . . . . . . . 14
RTA10 Tiller Hitch Offset . . . . . . . . . . . . . . . . . . . 14
RTA15 Tiller Hitch Sideshift . . . . . . . . . . . . . . . . . 14
Drive Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Rear Deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Skid Shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Section 4 Maintenance and Lubrication .17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Tine Replacement . . . . . . . . . . . . . . . . . . . . . . . .17
Driveline Protection . . . . . . . . . . . . . . . . . . . . . . .17
Clutches With 4 Adjusting Nuts . . . . . . . . . . . . . .17
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . .17
Clutch Disassembly & Assembly . . . . . . . . . . .18
Clutches With 8 Hex Socket Bolts . . . . . . . . . . . .19
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . .19
Clutch Disassembly & Assembly . . . . . . . . . . .19
Shearbolt Protection . . . . . . . . . . . . . . . . . . . . . . .19
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Driveline U-Joint . . . . . . . . . . . . . . . . . . . . . . .21
Driveline Shaft . . . . . . . . . . . . . . . . . . . . . . . . .21
Chaincase . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Bearing On Right End Of Rotor Shaft . . . . . . .22
Side Plug Gearbox . . . . . . . . . . . . . . . . . . . . .22
Top Plug Gearbox (10 Series) . . . . . . . . . . . . .22
Top Plug Gearbox (15 Series) . . . . . . . . . . . . .22
Section 5 Specifications and Capacities 23
RTA10 Series Rotary Tiller . . . . . . . . . . . . . . . . . .23
RTA15 Series Rotary Tiller . . . . . . . . . . . . . . . . . .23
Section 6 Features and Benefits . . . . . . .24
RTA10 Series Rotary Tiller . . . . . . . . . . . . . . . . . .24
RTA15 Series Rotary Tiller . . . . . . . . . . . . . . . . . .25
Section 7 Troubleshooting . . . . . . . . . . .26
Section 8 Appendix . . . . . . . . . . . . . . . . .27
Torque Values Chart . . . . . . . . . . . . . . . . . . . . 27
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
© Copyright 2008 All rights Reserved
LandPrideprovidesthispublication“asis”withoutwarrantyofanykind,eitherexpressed or implied.While every precaution hasbeen taken in thepreparation of this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
RTA10 & RTA15 Series Rotary Tillers 311-252M
10/13/08
Land Pride
▲
Table of Contents
Important Safety Information
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Safety at All Times
Thoroughly read and understand
the instructions given in this
manual before operation. Refer to
the “Safety Label” section, read
all instructions noted on them.
Do not allow anyone to operate
this equipment who has not fully
read and comprehended this
manual and who has not been
properly trained in the safe
operation of the equipment.
▲ Operator should be familiar with
all functions of the unit.
▲ Operate implement from the
driver’s seat only.
▲ Make sure all guards and shields
are in place and secured before
operating the implement.
▲ Do not leave tractor or implement
unattended with engine running.
▲ Dismounting from a moving
tractor could cause serious injury
or death.
▲ Do not stand between the tractor
and implement during hitching.
▲ Keep hands, feet, and clothing
away from power-driven parts.
▲ Wear snug fitting clothing to avoid
entanglement with moving parts.
▲ Watch out for wires, trees, etc.,
when raising implement. Make
sure all persons are clear of
working area.
▲ Turning tractor too tight may
cause implement to ride up on
wheels. This could result in injury
or equipment damage.
Look For The Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
!
Be Aware of
Signal Words
A Signal word designates a degree or
level of hazard seriousness. The
signal words are:
!
DANGER
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme situations, typically for
machine components that, for
functional purposes, cannot be
guarded.
For Your Protection
▲ Thoroughly read and understand
the “Safety Label” section, read all
instructions noted on them.
equipment, hazard control and accident prevention
are dependent upon the awareness, concern,
prudence and proper training of personnel involved in
the operation, transport, maintenance and storage of
equipment.
!
WARNING
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may also
be used to alert against unsafe
practices.
!
CAUTION
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
Shutdown and Storage
▲ Lower machine to ground, put
tractor in park, turn off engine, and
remove the key.
▲ Detach and store implements in a
area where children normally do
not play. Secure implement by
using blocks and supports.
10/13/08
OFF
REMO
VE
RTA10 & RTA15 Series Rotary Tillers 311-252M
1
Table of Contents
Land Pride
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Use Safety
Lights and Devices
▲ Slow moving tractors, self-
propelled equipment, and towed
implements can create a hazard
when driven on public roads. They
are difficult to see, especially at
night.
▲ Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Use lights and devices provided
with implement.
Transport
Machinery Safely
▲ Comply with state and local laws.
▲ Maximum transport speed for
implement is 20 mph. DO NOT
EXCEED.Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrain require a
slower speed.
▲ Sudden braking can cause a
towed load to swerve and upset.
Reduce speed if towed load is not
equipped with brakes.
▲ Use the following maximum
speed - tow load weight ratios as
a guideline:
20 mph when weight is less
than or equal to the weight of
tractor.
10 mph when weight is double
the weight of tractor.
▲ IMPORTANT: Do not tow a load
that is more than double the
weight of tractor.
Practice Safe Maintenance
▲ Understand procedure before
doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲ Work in a clean dry area.
▲ Lower the implement to the
ground, put tractor in park, turn off
engine, and remove key before
performing maintenance.
▲ Allow implement to cool
completely.
▲ Do not grease or oil implement
while it is in operation.
▲ Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲ Remove buildup of grease, oil or
debris.
▲ Remove all tools and unused
parts from implement before
operation.
Keep Riders
Off Machinery
▲ Riders obstruct the operator’s
view, they could be struck by
foreign objects or thrown from the
machine.
▲ Never allow children to operate
equipment.
RTA10 & RTA15 Series Rotary Tillers 311-252M
2
10/13/08
Land Pride
Table of Contents
Important Safety Information
These are common practices that may or may not be applicable to the products described in
this manual.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire
extinguisher handy.
▲ Keep emergency numbers for
doctor, ambulance, hospital and
fire department near phone.
911
Wear
Protective Equipment
▲ Protectiveclothing andequipment
should be worn.
▲ Wear clothing and equipment
appropriate for the job. Avoid
loose fitting clothing.
▲ Prolongedexposure to loud noise
can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.
▲ Operating equipment safely
requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.
Avoid High
Pressure Fluids Hazard
▲ Escapingfluid under pressure can
penetratethe skin causing serious
injury.
▲ Avoid the hazard by relieving
pressure before disconnecting
hydraulic lines or performing work
on the system.
▲ Make sure all hydraulic fluid
connections are tight and all
hydraulic hoses and lines are in
good condition before aqpplying
pressure to the system.
▲ Use a piece of paper or
cardboard, NOTBODYPARTS, to
check for suspected leaks.
▲ Wear protective gloves and safety
glasses or goggles when working
with hydraulic systems.
▲ If an accident occurs, see a
doctor immediately. Any fluid
injected into the skin must be
treated within a few hours or
gangrene may result.
10/13/08
RTA10 & RTA15 Series Rotary Tillers 311-252M
3
Important Safety Information
Table of Contents
Land Pride
Safety Labels
1. Your tiller comes equipped with all safety labels in place.
They were designed to help you safely operate your mower.
Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new labels
go to your nearest Land Pride dealer.
4. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request.
22196
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
818-130C
Operate only w/540 rpm PTO
22195
Model RTA10
Model RTA15
Model RTA10
Model RTA15
818-171C
Rotating Tines Hazard!
RTA10 & RTA15 Series Rotary Tillers 311-252M
4
10/13/08
Land Pride
Important Safety Information
Table of Contents
ROTATING DRIVELINE
22195
22196
Model RTA10
Model RTA15
KEEP AWAY!
818-552C
Rotating Driveline Hazard - Keep
Away!
22195
10/13/08
Model RTA10
Model RTA15
818-858C
General Safety Instructions
RTA10 & RTA15 Series Rotary Tillers 311-252M
5
Important Safety Information
Table of Contents
Land Pride
22195
22196
Model RTA10
818-543C
Guard Missing - Do Not operate.
Model RTA15
13042
13042
RTA10 & RTA15 Series Rotary Tillers 311-252M
6
Model RTA10
Model RTA15
Model RTA10
Model RTA15
818-540C
Shield missing - Do Not operate.
ROTATING DRIVELINE
KEEP AWAY!
818-552C
RotatingDrivelineHazard-Keep
Away!
10/13/08
Land Pride
Table of Contents
Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners.
Thisrotary tiller has beendesigned with care and built by
skilledworkers using quality materials. Properassembly,
maintenance, and safe operating practices will help you
get years of satisfactory use from the machine.
Application
The RTA10 and RTA15 Series Rotary Tillers are
designed and built by Land Pride to till the soil for
seedbed or planting preparation. Both models are
adapted for three-point hitch Category 1 mounting. The
RTA10 has a 17-25 horsepower tractor requirement,
while the RTA15 has a 17-35 horsepower requirement.
These Land Pride Tillers have uses and applications in
landscaping, nurseries, gardens, and light commercial
use. See “Features and Benefits”, “Section 6” for
additional information.
Using This Manual
This Operator’s Manual is designed to help familiarize
•
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com or printed from the Land Pride
Service & Support Center by your dealer.
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.
The parts on your Rotary Tiller have been specially
designedand shouldonly bereplaced with genuineLand
Pride parts. Therefore, should your tiller require
replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
modelnumber when ordering parts from your Land Pride
dealer.Be sureto includeyour serialand modelnumbers
incorrespondence also. Referto Figure 1 for the location
of your serial number plate.
.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
RotaryTiller. If forany reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
youmay haveand that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
LandPride dealer.A dealer hastrained personnel, repair
parts and equipment needed to service the tiller.
10/13/08
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
RTA10 & RTA15 Series Rotary Tillers 311-252M
7
Table of Contents
Section 1 Assembly and Set-Up
Section 1 Assembly and Set-Up
!
CAUTION
To avoid bodily injury caused by accidental falling of tiller,
securely support tiller on safe supporting stands or blocks!
This unit is shipped almost completely assembled.
Carefully follow instructions for final assembly.
Before attempting assembly check the following items.
Having all the needed parts and equipment readily at
hand will speed up your assembly task and will make the
job as safe as possible.
• Check for fasteners and pins that were shipped with
the tiller. All hardware coming from the factory has
been installed in the location where it will be used. If a
part or fastener is temporarily removed for assembly
reasons, remember where it goes. Keep the parts
separated.
• Have a fork lift or loader along with chains and safety
standsthat are sized for the job ready for the assembly
task.
• Have a minimum of 2 people at hand during assembly.
• Check to see that all nuts are tightened.
NOTE: For correct torque values, refer to “Torque
Values Chart” on page 27.
Land Pride
Tractor Requirements
This tiller is designed with a 3-point category l hitch.
Horse power rating of the tractor should not exceed 25
PTO horsepower for the 10 Series Rotary Tiller and not
to exceed 35 PTO horsepower for the 15 Series.
!
CAUTION
Do not over speed PTO or machine damage may result. This
tiller is designed to be used with a tractor using a 540 rpm rear
PTO.
NOTE: In order to maintain steering control, ballast
may have to be added to your tractor. To determine
whether or not to add ballast, refer to your tractor
operator’s manual.
Hitch, Driveline Guard & Rear Chain
Refer to Figure 1-1:
1. Install top 3-point hitch plates (#6 & #7) outside of
gearboxmounting frame with 5/8” x 1 1/2” bolts (#3),
5/8” lockwashers (#4), and 5/8” nuts (#5). Do not
tighten hardware at this time.
2. Install spacer (#9) between upper 3-point hitch
plates (#6 & #7) with 5/8” x 3 1/2” long bolt (#8).
3. Securely tighten all bolts to the correct torque.
RTA10 & RTA15 Series Rotary Tillers 311-252M
8
14163
Assembly Illustration
Figure 1-1
10/13/08
Loading...