LandAirSea Systems LNGS-2100 User Manual

User Guide

SilverCloud

Real-Time GPS Tracking System

™

1

1. About this Guide! ! ! ! ! ! !

1.1! Thank You

First of all, we at LandAirSea Systems want to thank you for purchasing the SilverCloud™ Real­Time GPS Tracking System. The SilverCloud incorporates an inclusive GPS and cellular module
capable of transmitting position data updates as fast as once every 3 seconds. This makes it

one of the fastest real-time GPS tracking devices on the market today. The SilverCloud™ online
mapping interface has also been developed to provide a truly user-friendly tracking experience.

This guide has been designed to provide step-by-step instructions on how to successfully install,
activate and utilize the SilverCloud™ GPS Tracking System.

1.2! Wa

This tracking device is considered water-resistant, NOT
outside the vehicle, we strongly recommend purchasing the optional waterproof magnetic mount
enclosure. Water spray at high speeds can penetrate the device and cause failure. Water
damage is not covered under the warranty and repairs require sending the device back to the
manufacturer. Cost for time and materials will apply. Mounting this device under a vehicle also
exposes the unit to road hazards. Because of this, lost units are not covered under the
manufacturer’s warranty (refer to LandAirSea’s Plus Protection Plan for extended warranty
information).

LandAirSea Systems tracking devices may not be used to violate the privacy rights of others, or
in violation of local, county, state, or federal statutes. GPS tracking may be illegal in certain
states. In no way, will LandAirSea, its subsidiaries or partners be held responsible for
inappropriate use of these products.

IT IS THE SOLE RESPONSIBILITY OF THE BUYER, OWNER, OR USER, TO CONSULT
LEGAL COUNSEL FOR THE INTERPRETATION OF ANY LAWS APPLICABLE TO THE AREA
OF INTENDED USE OF THESE PRODUCTS.

rnings

waterproof. If the intended use is

IF HARDWIRING THE SILVERCLOUD, PLEASE TEST THE DEVICE PRIOR TO APPLYING
THE HARDWIRING KIT TO ENSURE THAT IT IS WORKING PROPERLY. ONCE THE DEVICE
HAS ACQUIRED A SATELLITE SIGNAL AND IS REPORTING TO THE SILVERCLOUD SITE,
YOU MAY THEN PROCEED WITH THE HARDWIRE INSTALLATION.

2. Key Features! ! ! ! ! ! ! !

2.1! Environment

• The SilverCloud™ online mapping interface can be used on any PC or Macintosh with a
high speed internet connection and an internet browser
all browsers, including Google Chrome, Safari, Firefox and Internet Explorer.

• Users can also access the SilverCloud™ online mapping interface on their smartphones
or mobile tablets (Google Android or Apple iPad) with high speed internet.

2.2! SilverCloud™ Data Plan Options

data plan is required for the SilverCloud. The data plan charts below list the update speeds

A
and their corresponding prices.

Pay As You Go: No Contract

. The interface is compatible with

Price Update Interval

$59.95/month 3 Second Continuous Updates
$49.95/month 5 Second Continuous Updates
$39.95/month 10 Second Continuous Updates
$29.95/month 1 Minute Continuous Updates

2.3! SilverCloud Online Software Features

Mapping Interface Fast and user-friendly web-browser based application with up

to date, simultaneous 2D and 3D mapping capabilities
powered by Google Maps

ShareSpot Patent-pending features, allows the user to share their GPS

location via URL address or embedded code on a website

Geo-Fencing Option Allows users to create customized zones that can send text

messages (SMS) and/or emails notifying the user when the
vehicle enters or exits that zone

Traffic Information Ability to indicate traffic and delays on the map by utilizing

existing Google Maps traffic flow interface

Routing Utility Offers users the ability to send real-time directions to driver’s

mobile phone via text message (SMS) and/or email

Historical Location Data Ability to view unlimited real-time GPS tracking and data, with

web-based historical playback as well as the ability to
generate printable text reports

SilverCloud Alerts Indicates speed, low-battery, excessive/unnecessary stops,

arrival and departure notifications via text message (SMS)
and/or email

3. Installing the SilverCloud™!! ! ! !

3.1

! Installing the SilverCloud™ System

Users will need to activate (Section 3) their SilverCloud™ unit(s) first before starting the system.
Users will also need to install the Google Earth® plugin on their computer (PC and/or Mac). The
Google Earth plugin will allow users to access the functionalities of Google Earth without having
to install the full application.

After activating the SilverCloud™ unit(s), be sure to charge the device. Once the device is fully
charged, take it outdoors with a clear view of the sky so that it can acquire a strong GPS signal.

The SilverCloud has 4 LED lights on the back panel of the device (see Illustration below). There
is an on/off switch located inside the battery case. To access the switch, open the battery
compartment. When the device is turned on, the LED lights on the back panel will light up. The
device should be outdoors with a clear view of the sky before checking the LED light behavior.

1 2 3 4

Battery Compartment

1.Charging light: The #1 LED will display red when the device is charging. Once the device is
fully charged, the light will turn off.

2.Cellular Modem light: The #2 light will be green at first, then pulse a short yellow burst when
the device is communicating with a cell tower. The light will then turn green again.

3.GPS light: The #3 light will display as blue. It will pulse once every 3 seconds when the de­vice is attempting to acquire a fix with the GPS satellites, and then turn solid once the fix
has been made. Upon turning solid blue, the device is logging GPS data.

4.Power Light. The #4 light will display green once the device turned on and has sufficient
power to operate. It will turn from green to yellow at 50% power, and red at 20%.

Locations for Placement of the SilverCloud Inside the

hicles

Ve

3.2! Starting the System

After the activating and installing the device, users will be able to track and monitor their
vehicles from their desired computer
access with their preferred internet browser (Google Chrome or Safari is recommended).

, smartphone or mobile tablet with high-speed internet

Once the SilverCloud™ home page loads,
users will need to type in their username and
password. After logging in, the online mapping
interface will load, and the user will be able to
click the vehicle icon that appears on the
screen to display the vehicle’s real-time
location, speed, heading, date and time and
battery strength. (see screenshot to the right)