Lancom AirLancer Extender O-30, AirLancer Extender O-70, AirLancer Extender O-18a Specification

... connecting your business

AirLancer Extender outdoor antennas

Weather-proof antennas for outdoor use

Directional antennas for wireless bridges and wide-angle antennas for campuses

Complete sets include cables and mounting materials

Optional extra – lightning protection for outdoor AirLancer Extender antenna installations

AirLancer Extender outdoor antennas are the optimal WLAN add-on for interconnecting cabled LANs via wireless

bridges or for establishing pico-cell networks on campuses, hotspots, or in large halls, for example. An optional

extra recommended for outdoor use: The AirLancer Extender SA-5 lightning protection.

AirLancer Extender O-30 AirLancer Extender O-70 AirLancer Extender O-18a

Designed for

14-dBi-directional antenna
for outdoor use

Pico-cell antenna
for indoor and outdoor use

18dBi-directional antenna for indoor and
outdoor use

Frequenzy range

2400 – 2483.5 MHz (ISM) 2400 – 2483,5 MHz (ISM) 5.25 – 5.875 GHz

Antenna gain

14 dBi 8.5 dBi 18 dBi

Range (Point to Point)

up to 3000 m up to 1300 m up to 8000 m

Data rate

up to 108Mbps up to 108Mbps up to 108Mbps

Directivity pattern directional 30° (3 dB beamwidth) directional 70° (3 dB beamwidth) 18° horizontal, 18° vertical

Polarization

vertical, linear vertical, linear vertical, linear

VSWR 1.4 : 1 1.5 : 1 1.5 : 1

Front to back ratio > 15 dB > 12 dB 25 dB

Impedance 50 Ohms 50 Ohms 50 Ohms

Mounting for wall or pylon mounting (pylon ø 40 – 60 mm) adjustable

Dimension (H x W x D) 240 x 240 x 60 mm

Mounting ca. 100 x 55 x 45 mm

125 x 120 x 50 mm
Mounting 100 x 85 x 75 mm

215 x 200 x 48.5 mm

Wiring and connectors 9 m ULA168

(N connector male – reverse SMA female)
jumper-cable 0.10 m
(Reverse SMA male – proprietary
connector for AirLancer MC-11, MC-11b,
FCC-conform)
RP-SMA terminator

6 m ULA168
(N connector male – reverse SMA female)
jumper-Kabel 0.10 m
(Reverse SMA male – proprietary
Anschluss für AirLancer MC-11, MC-11b,
FCC-conform)
RP-SMA terminator

1 m ULA168 RP-SMA jack to N plug ;

3 m HDF 400 N jack to N plug
(prepared for integration
of AirLancer Extender SA-5)

RP-SMA terminator

Operational environment - 20 °C to +60 °C,

up to 100 % humidity at 25 °C

- 10 °C to +55 °C, up to 95 % humidity
(non condensing)

- 40°C to +80°C, up to 95% humidity at
25°C (non condensing),
wind speed up to 216 km/h

Optional connections Direct to the Reverse SMA connector of the main antenna connector of LANCOM Wireless access points. When combining the AirLan-

cer Extender antennas with the OAP Wireless, the supplied cables are not suitable for use with the SMA connector. The access point
is supplied with a 1m adapter cable.

Approvals/standards The antenna is suitable for operation with LANCOM Wireless base stations only. The overall system meets CE standards and may be

operated under strict observation of the guidelines for the use of frequency ranges and transmission power.
For this purpose, LANCOM access points feature a setting for transmission power.
Further information is available in the LANCOM Reference Manual and at www.lancom.de

Service Warranty 2 years

Support via hotline und internet

Item no. 60478 60469 61210

Accessories

Cable AirLancer cable NJ-NP 3m, 6m, 9m – extension cable item no. 61230, 61231, 61232

AirLancer Extender SA-5-Surge protector

Application range 5-GHz surge protector

Impedance 50 Ohms

Max. power 200 Watts

Insertion loss < 0.1dB

Conducted voltage 350 V DC

Connectors Standard N plug and N jack, fixation for ground line

Dimensions 75 x 25 x 35 mm

Operational environment -20° to +60°C, up to 100% humidity at 25°C

Item no. 61212

AirLancer Extender outdoor antennas