LANCOM 1640E
RESET
4
Quick Reference Guide
WAN interface
a
Connect the WAN interface to your WAN modem using the
enclosed ethernet cable with the dark green connectors.
Ethernet interface
b
Use the cable with the kiwi-colored connectors to connect one of
the interfaces ETH 1 to ETH 3 to your PC or a LAN switch.
Conguration interface
c
Conguring the device via the serial interface requires a serial
conguration cable (available as an accessory).
a c d e fb
USB interface
d
You can use the USB interface to connect a USB printer or a
USB storage device.
Reset button
e
Pressed up to 5 seconds: device restart
Pressed until rst ashing up of all LEDs:
conguration reset and device restart
Power
f
When connecting the cable to the device, turn the bayonet
connector 90° clockwise until it clicks into place.
Use only the supplied power adapter.
Power
Online
WAN
a c d eb
a Power
Off Device switched off
Green, permanently* Device operational,
Red / green, blinking Conguration password not set. Without a
Red, blinking Hardware error
Red, blinking slowly Time or charge limit reached/error message
1x green inverse
blinking*
2x green inverse
blinking*
3x green inverse
blinking*
b Online
Off WAN connection inactive
Green, permanently WAN connection active
Red, permanently WAN connection error
resp. device paired / claimed and LANCOM
Management Cloud (LMC) accessible
conguration password, the conguration
data in the device is unprotected.
occurred
Connection to the LMC active, pairing OK,
device not claimed
Pairing error, resp. LMC activation code
not available
LMC not accessible, resp. communication
error
LANCOM 1640E
ETH 2
ETH 1
ETH 3
VPN
c WAN
Off Interface deactivated
Orange, blinking Synchronization with the modem
Orange, permanently Synchronization with the modem
Green, permanently WAN connection established
Green, ickering WAN data transmission
Red / orange, blinking Hardware error, ext. modem
successful
d ETH
Off No link
Green, permanently Network connection ready (link)
Green, ickering Data transmission
e VPN
Off No VPN connection active
Green, permanently VPN connection active
Green, blinking Establishing VPN connection
Hardware
Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against
disconnection
Power consumption Max. ca. 8.5 W
Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces
WAN 10 / 100 / 1000 Mbps Gigabit Ethernet
ETH 3 individual 10 / 100 / 1000 Mbps Gigabit Ethernet ports; ex-factory operation as switch. One
port congured as WAN port. The ports can be electrically disabled in the LCOS conguration
and support energy saving functionality as per IEEE 802.3az.
USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices
(COM-port servers), or USB data media (FAT le system)
Serial Interface Serial conguration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable
for optional connection of analog / GPRS modems. Supports internal COM-port server and
provides transparent asynchronous serial data transmission via TCP
WAN protocols
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,
RIP-2, VLAN, IP
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.lancom-systems.com/ce/
Package content
Documentation Hardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)
Cable 2 Ethernet cables, 3m
Power adapter External power adapter, NEST 12 V / 2 A DC/S, barrel connector 2.1 / 5.5 mm bayonet,
LANCOM item no. 111303 (not for WW devices)
Cloud-ready
Please observe the following when setting up the device
A For devices to be operated on the desktop, please attach the adhesive rubber
footpads
A Do not rest any objects on top of the device
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
A Do not obstruct the side ventilation slots
A In case of wall mounting, use the drilling template as supplied
A Rack installation with the optional LANCOM Rack Mount (not supplied)
*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is congured to be managed by the LANCOM
MOUNTING AND CONNECTING THE DEVICE
Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular
the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s
WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the
corresponding software components will be made available on a download server upon request.
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document
contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111789/0120
TECHNICAL DETAILS
Loading...