Lancaster VD54 User Manual

VD
54

ACTIVATION YOUR FREE GUARANTEE PRODUCTS/PERSONALIZED SERVICE

Activate your free 2 years guarantee by registering your LANCASTER product
and also receive personalized services such as news on all LANCASTER world

USER’S MANUAL FOR VD54

Italy

VD
54

DISPLAY AND CROWN/BUTTON OPERATION

Minute hand

Hour hand

Stopwatch minute hand

(Move in minute increments)

Second hand

Stopwatch second hand

(Move in second increments)

*The measured time is indicated by the stopwatch hands that move independently of the center and 24-hour hands.

24-hour hand
(Indicates the time on a 24-hour basis)

Button (A) * In stopwatch function Start/Stop

Crown at normal position

Crown at extended position *Time setting

Button (B) * In stopwatch function Split/Split release/Reset

ADJUSTING THE STOPWATCH HAND POSITION

Before setting the time, check if the Stopwatch second and minute hands are at the “0” (12 o’ clock) position.
If the stopwatch is in use, press the button in the following order to reset it, and then, check if the hands return to “0” position.

If the stopwatch is counting: (A) (B)
If the stopwatch is stopped: (B)
If the split time is displayed: (B) (A) (B)

*If either of the stopwatch hands are not at the “0” position, reset them following the procedure below:

1. Pull out the crown

Crown

Stopwatch

minute hand

2. Press button (A) or (B) to reset the stopwatch
second and minute hands to “0” position

*By pressing button (A), the hands move counter

clockwise

*By pressing button (B), the hands move clockwise

Stopwatch second hand

A

B

3. Push the crown back to the
normal position

TIME SETTING

*Before setting the time, check that the chronograph measurement is stopped.

2. Pull out the crown when the
second hand is at the 12
o’clock position. The second
hand will stop on the spot.

*Do not press any button.

Otherwise, the chronograph
hands will move.

2. Turn the crown to set the
hour, minute and 24-hour
hands to the desired time.
As the hour hands moves,
the 24-hour hands also
moves correspondingly.
When setting the hour hand,
check that the 24-hour hand
is set properly.Otherwise,
the chronograph hands will
move.

3. Push the crown back in to the
normal position in accordance
with a time signal.