Lancaster MIYOTA CALIBER JSO5, MIYOTA CALIBER JS15, MIYOTA CALIBER JS25 User Manual

Italy

USER’S MANUAL FOR MIYOTA

CALIBER JS05/JS15/JS25

26 26

26

26

26

Italy

USER’S MANUAL FOR MIYOTA
CALIBER JSO5/JS15/JS25

Stopwatch
Minute Hand

Second Hand

Stopwatch
Second Hand24 Hour Hand

Stopwatch
Minute Hand

Stopwatch
Second Hand

24 Hour Hand

24 Hour Hand

Calendar

Button A

Normal Position

1st Click Position

2nd Click Position

Button B

Second Hand

Second Hand

Stopwatch
Second Hand

Stopwatch
Minute Hand

A) SETTING THE TIME

1. Pull the crown out to the 2nd click position.

2. Turn the crown to set hour and minute hands.

3. After the time has been set, push the crown back to the normal position.

B) SETTING THE DATE

1. Pull the crown out to the 1st click position.

2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.

3. After the date has been set, push the crown back to the normal position.

C) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1/1 second united up

to maximum of 30 minutes.
Stopwatch will stop automatically after running continuously for 30 minutes.
[Measuring time with the stopwatch]

1. Press button "A" to start the stopwatch.

2. The stop watch can be started and stopped each time button "A" is pressed.

3. Press button “B” to reset the stopwatch and stopwatch minute and second hands

return to their (0) positions.

D) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch second & minute hand does not

return to the (0) position.

1. Pull the crown out to the 2nd click position.

2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button "A" or

"B".

3. Once the both hands been zeroed, reset the time and return the crown to its normal
position.

“A”

“A”

“B”

Time Measurement Stop

Reset

“A”