Lamptron FC Touch Instruction Manual

FC Touch instruction manual

Tools required:

Phillips head screwdriver

Mount the product into a 5.25 inch drive bay of your computer

chassis using the screws in the accessory bag.

Connect the fans

Connect the power supply

the mini jumper

P5

P4

P3

P2

P1

Connect the
temperature
sensors

JS1
JS2
JS3
JS4
JS5
JS6

ALARM

P6

Use the mini jumper to

activate the alarm function

NOTE:

In order to protect your computer the device has the alarm function.

If the temperature exceeds 70 degrees Celsius, the unit will be

1. Connect the fans

P1: Connect the first channel fan

P2: Connect the second channel fan

P3: Connect the third channel fan

P4: Connect the fourth channel fan

P5: Connect the fifth channel fan

P6: Connect the sixth channel fan

P: Connect the power supply

2. Connect the temperature sensors

JS1: Connect the first channel temperature sensor

JS2: Connect the second channel temperature sensor

JS3: Connect the third channel temperature sensor

JS4: Connect the fourth channel temperature sensor

JS5: Connect the fifth channel temperature sensor

JS6: Connect the sixth channel temperature sensor

ALARM:

Use the mini jumper to activate the alarm function

P

emitting noise. If the fans are not operating when the

voltage is over 6.5v, the unit will be emitting noise. Insert

the mini jumper to enable alarm function or remove it to

disable the alarm function

OPERATION:

Power button: The power button could turn or shut the back

light of the device

THE MAIN INTERFACE

The light bulb button: The light bulb button adjust the brightness

of the screen. There are three settings for the brightness. (If the

light bulb button is not being used, it will disappear in 6 seconds)

The fan 1 button: Touch it to enter the fan 1 branch interface

The fan 2 button: Touch it to enter the fan 2 branch interface

The fan 3 button: Touch it to enter the fan 3 branch interface

The fan 4 button: Touch it to enter the fan 4 branch interface

The fan 5 button: Touch it to enter the fan 5 branch interface

The fan 6 button: Touch it to enter the fan 6 branch interface

1

2

3

4

5

6

7

1 X Installation Guide 1 X Power Cable

6 X Fan Cable 6 X Sensors Cable

4 X Screws 1 X Product Catalog

1 X Screen cloth 1 X Jumper