LaMotte DEMINERALIZER BOTTLES User Manual

DEMINERALIZER BOTTLES

The LaMotte Demineralizer Bottle is a plastic bottle with a pour spout and a
special filter inside the cap. The bottle is partially filled with an ion exchange
resin containing an indicator to show when the exchange resin has been
exhausted. The indicator will change from dark blueish-green to yellow amber
when the resin should be replaced. The Demineralizer Bottle is available in
four different sizes, as listed below. Use the “Bottle Code” to order a complete
bottle with resin and instructions. Use the “Refill Code” to order a resin refill
package.

SIZE BOTTLE CODE REFILL CODE

60 mL 1151 R-1151

120 mL 1152 R-1152

250 mL 1155 R-1155

500 mL 1150 R-1150

NOTE: The Demineralizer Bottle may not remove all of the chloride ions
from tap water. Tap water from water softener systems may contain
abnormally high amounts of chloride. This may result in high salinity test
results. Perform a salinity test on the Demineralizer Bottle water ONLY to
determine the contribution by the tap water to the salinity test result.

PRO CE DURE

1.

Remove cap and fill
bottle with water to
be demineralized.

2.

Recap, making sure
spout is closed, and
shake vigorously for
30 seconds.

30

S

E

C

O

N

D

S

Open spout,
invert bottle,
and gently
squeeze to dispense the
demineralized water.

3.

DEMINERALIZER CARE

Do not heat water over 100°F.
Keep the resin covered with water

at all times. Store fairly full.
Keep filter & cap from original

bottle to be used with refill.

•

•

•

800-344-3100 • 410-778-3100 (Out side U.S.A.) • Fax [phone]

LaMOTTE COM PANY

Helping Peo ple Solve An a lyt i cal Challenges

PO Box 329 • Chestertown • Mary land • 21620 • USA

Visit us on the web at www.lamotte.com

SM

61151 · 7.11