Page 1
SALT WATER pH KIT
OCTA-SLIDE 2, pH 7.7-8.4
CODE 2159-02
QUANTITY CONTENTS CODE
2x 30 mL Cresol Red Indicator 2212-G
2 Test Tubes, 2.5-5-10 mL, plastic, w/caps 0106
1 Salt Water pH Octa-Slide 2 Bar, 7.7-8.4 2165-02
1 Octa-Slide 2 Viewer 1101
*WARNING: Reagents marked with an * are considered to be potential health hazards. To view
or print a Safety Data Sheet (SDS) for these reagents go to www.lamotte.com. Search for the four
digit reagent code number listed on the reagent label, in the contents list or in the test procedures.
Omit any letter that follows or precedes the four digit code number. For example, if the code is
4450WT-H, search 4450. To obtain a printed copy, contact LaMotte by email, phone or fax.
Emergency information for all LaMotte reagents
is available from Chem-Tel:
(US, 1-800-255-3924)
(International, call collect, 813-248-0585).
To order individual reagents or test kit components,
use the specifi ed code number.
USE OF THE OCTA-SLIDE 2 VIEWER
Warning! This set contains chemicals
that may be harmful if misused. Read
cautions on individual containers
carefully. Not to be used by children
except under adult supervision.
The Octa-Slide 2 Viewer should be held so
non-direct light enters through the back of
the Viewer.
Insert the Octa-Slide 2
the Viewer. Insert the reacted sample into
the top of the Viewer. Match the color of the
reaction to the color standards.
www.GlobalTestSupply.com
Bar into
Page 2
PROCEDURE
1
Insert Salt Water pH
Octa-Slide 2 Bar
(2165-02) into the
Octa-Slide 2 Viewer
(1101)
3
Add 10 drops of
Cresol Red
Indicator (2212)
2
Fill a test tube
(0106) to the
10 mL line with
sample water.
4
Cap and mix.
5
Insert test tube
into Octa-Slide 2
Viewer (1101).
www.GlobalTestSupply.com
6
Match sample color
to a color standard.
Record as pH.
Loading...