Lamona HJA2480-1, LAM2401-1, LAM2407/8 User's Installation Manual
Chimney Extractor
User & Installation Guide
HJA2480-1
LAM2401-1
LAM2407/8
www.howdens.com/appliance-registration
2
See back page for product serial number
3
Environmental note
Condensation
IMPORTANT SAFETY INFORMATION
Parts Identifi cation
Using your extractor
Cleaning your extractor
Maintenance
Extractor cables
Installation
Trouble shooting
Your guarantee
Performance Information
Contents
Page 4
Page 4
Page 5 - 7
Page 8
Page 9
Page 10
Page 11 - 13
Page 13
Page 14 - 20
Page 21
Page 22
Page 23 - 25
4
Environmental Note
Condensation
NOTE: Before discarding an old appliance, switch off and disconnect it from
the power supply. Cut off and render any plug useless. Cut the cable off
directly behind the appliance to prevent misuse. This should be undertaken
by a competent person.
Please discard all packaging material with due regard for the environment.
This appliance is marked according to the European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly you will help prevent potential negative
consequences for the environment and human health. The symbol on this
product indicates that this product may not be treated as household waste.
Instead it should be handed over to the applicable collection point for
recycling of electrical and electronic equipment. Disposal must be carried
out in accordance with local environmental regulations for waste disposal.
For more detailed information please contact your local council household
waste site.
This product complies with EU RoHS Directive (2011/65/EU) It does not
contain harmful and prohibited materials specifi ed in the Directive.
Metal Surfaces of the extractor and condensation
When using an induction hob and cooking with pans of water some of
the steam produced by the cooking process may condense onto the cold
metallic surfaces. The amount of this condensation on any particular
surface will depend on many factors including the ambient temperature in
the kitchen, the related ambient temperature of the metal surfaces, the
general ventilation within the kitchen and the type of cooking. Using lids on
pans can help reduce the condensation. This is not a fault with either the
hob or extractor if correctly installed.
5
• Your safety is of the utmost importance. Please make sure
that you read this instruction booklet before attempting to
install or use the appliance.
IMPORTANT: Any installation work must be carried out by a
qualifi ed electrician or competent person.
• The extractor must be installed in accordance with the
installation instructions and all measurements followed.
• If the cooker hood is installed for use above a gas appliance
then the provision for ventilation must be in accordance
with the Gas Safety Codes of Practice BS.6172, BS.5440
& BS.6891 (Natural Gas) and BS.5482 (LP Gas) 1994, the
Gas Safety (Installation & Use) Regulations, the Building
Regulations issued by the Department of the Environment,
the Building Standards (Scotland) (Consolidated) Regulations
issued by the Scottish Development Department.
• It is dangerous to alter the specifi cations or to modify this
product. Do not tamper with it or attempt to modify the
appliance in any way.
• When installing the hood, ensure that the following distances
are observed between the worktop and the bottom of the
cooker hood:
Recommended: 750 mm Minimum: 700mm
IMPORTANT: DO NOT SET YOUR EXTRACTOR LESS THAN 700
mm ABOVE YOUR WORKTOP.
• When installed between adjoining wall cabinets, the cabinets
must not overhang the hob.
• The edges of the extractor are sharp – be mindful of this as
you handle your appliance, especially during installation and
cleaning. DO NOT CLEAN IN BEHIND THE GREASE FILTERS!
• Your extractor is for domestic use only.(* See page 22)
Important Safety Information
6
Important Safety Information
• Please dispose of the packing material carefully – children
are especially vulnerable to it.
• If the room where the extractor is to be used contains a fuel
burning appliance such as a central heating boiler then its
fl ue must be of the sealed or balanced fl ue type.
• If other types of fl ue or appliances are fi tted, ensure that
there is an adequate supply of air in the room.
• When the extractor is being used in its extractor function,
ensure that the ducting is fi re retardant and that there are
no bends sharper than 90 degrees as this will reduce the
effi ciency of the hood.
• Ensure the ducting for the extractor function has the same
diameter as the outlet hole all the way through.
• Keep young children from using, playing with or tampering
with the cooker hood. Older children and infi rm persons
should be supervised if they are using the cooker hood.
• Dirty oil is an even greater fi re risk.
• Always put lids on pots and pans when cooking on a gas
cooker.
• The manufacturer refuses to accept any responsibility for
damages arising to the extractor or it catching on fi re, from
a failure to observe the fi re safety advice contained in this
instruction booklet.
• Remember that when in extraction mode, your extractor is
removing air from your room. Ensure that proper ventilation
measures are being observed.
• Note: Your extractor is designed to remove cooking odours
from the room and not steam.
• Warning - Always ensure that the extractor has been
disconnected from the power supply before carrying out any
work, including replacing light bulbs.
7
• Do not connect the ducting system of this appliance to any
existing ventilation system which is being used for any other
purpose.
• Do not install above a cooker with a high level grill.
• Never leave frying pans unattended during use as overheated
fats and oils might catch fi re.
The lights on this appliance should only be used during operation of the extractor. They should not be left on permanently and
used as a lighting source.
• The extractor should not be exposed to a direct heat source
from the cooking device underneath it, i.e. a naked fl ame
from a gas burner or heat from electric hob zones without a
pan on them.
• Do not attempt to use the extractor if it is damaged in any
way. Never attempt to use it without the grease fi lters fi tted
or if the fi lters are excessively greasy!
• Never fl ambé cook under this extractor.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY IN
THE EVENT OF FAILURE TO OBSERVE THE INSTRUCTIONS GIVEN HERE, FOR INSTALLATION, MAINTENANCE AND SUITABLE
USE OF THE EXTRACTOR.
* If you are using the appliance in recirculation mode, then
PLEASE NOTE that some of the vent in the upper chimney section must be exposed. You will have to take this into account
when calculating the minimum height of the extractor when installed.
Important Safety Information
8
On opening your box you will fi nd the extractor body, a two-piece telescopic
decorative chimney, two fi xing brackets, outlet reducer, six chimney fi xing
screws, eight wall screws and eight rawl plugs and a cable grid.
Parts Identifi cation
1.
3.
2.
4.
5. 6. 7.
8.
9.
1. Main Extractor Body
2. Cable Grid
3. Upper Chimney
4. Lower Chimney
5. Outlet Reducer
6. Chimney Brackets
7. Wall Fixing Screws
8. Chimney Fixing Screws
9. Rawl Plugs
Loading...