1
Car Hands-Free Wireless Earphones
LK-168C installation and operational instructions
Thank you for purchasing our product. “LK-168C” is a special car hands-free wireless
earphone.
User of wireless earphone will make you enjoy comfortable communications.
In order to use this product effectively, it is suggested that you read the operation
instructions carefully before using this product. Keep the instruction manual well.
♫Attention: Our company will take no responsibilities on any consequences due to
improper installation and operation with this product.
Product Feature
• Product apply to most of the cellular phones.
• Share of the car “cigar socket” plug
• Exquisite wireless earphone, flexibility on privacy communication,
• Harmonious design and convenient operation
• Automatically switch to cellular phone operation even though when you play
MP3 or iPod if there is call coming in or you like to dial out.
• Automatically switch back and forth between cellular phone or FM radio set if
MP3 feature is not been use.
• Stereo audio frequency converter has Hi-Fi effect.
1
Installation instruction
1. Start engine, and plug in the “ Cigar Socket” of the main unit, (Figure
1, #3 ) into the “ igniter socket” of the car. Make sure the LED
lit.(Figure 1, #9)
2. Place the microphone in a suitable position, and make sure the visor
facing the user. (Note that installation shall be made on a position
without influence on operation and vision field)
3. Connect the main unit connector from the microphone wire to the
main unit. (Figure 1, #5) ( ☺If earphone socket of cellular phone,
please find a compatible adapter, ask your retail store)
4. When you connect MP3 or iPod, please make sure the sound
converting line connect to main unit ( Figure 1, #7) firmly.
2
5.
Turn on the radio, set the Frequency adjustments for your own
Transmitting Frequency ( For instance, 88.1MHz). Please read the
manual for your specification.
2
6. When you use the earphone, please switch the button to On position.
When you finish the talk, please set it back to
mind that the earphone switch always set to OFF position when it in
idle position).
Operational Instruction:
1. Please keep your earphone and cellular phone in a certain distance,
after you connect the cellular phone with the main unit. (Otherwise,
distortion could occur).
2. This product can be used only when the main unit’s indicator (Figure 1,
#9) is on in red.
3. When there is call coming, for a phone with automatic receiving
function, it can perform automatic communication with device at ON
position; For a phone without automatic receiving function, it can
perform communication only after call key is pressed ON. ( Note:
partial automatic receiving phones do not work).
4. The received voice ( other party’s voice)
5. The voice volume from car speaker, it can be adjusted by either the
volume-controller of the car radio set or the volume controller of the
main unit.
6. When the wireless earphone (Figure1, #2) is being used, it’s power
LED(Figure 1,#10) is on; When it is not used, put the wireless
earphone on the earphone holder for charging (Figure 1, #11). During
the charging, wireless earphone’s power LED is off. When charging is
over, it will automatically stop charging
7. The earphone switch always set to OFF position when user is not
using it.
8. Our product can convert automatically. When the user’s friend takes a
call, it can stop enjoying the music from mp3 player with the car audio,
let the user talk with his friend freely. After the call it can let the car
audio play music with the mp3 player automatically.
9. Put the cellular away from the main unit as far as possible will get
better quality on communication.
3
Off position. ( Keep in
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, Uses and can radiate radio frequency energy and, If not installed
and used in accordance with the instructions, May cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
4
Loading...