Instruction Manual
LAMI CORPORATION INC.
1
Preface
Thank you for purchasing our 【 】.
This Instruction Manual (document) includes details for safe use of this product.
Please read this document thoroughly before using the product.
Also, carefully store this document for immediate use whenever necessary.
■ Preface P 1
┗ Table of Contents........................................................................................................................................ P
1
■ Precautions Before Use P 2
┣ List of Labels Attached to the Product and Meaning of Symbols............................................................... P 2
┣ Precautions for Handling ............................................................................................................................ P 3
┗ Place for Installation................................................................................................................................... P 4
■ Characteristics and Confirmation of Parts P 5
■ Installation of the Machine P 6
┣ Stand Assembly Method ............................................................................................................................. P 6
┣ Foot Switch Installation Method................................................................................................................. P 6
┣ Power Connection for re-winding Device ................................................................................................. P 6
┗ Fuse Installation Method............................................................................................................................. P 7
■ Name of Each Part P 8
┣ Main Body of Freesia 55C.......................................................................................................................... P 8
┣ Operation Panel........................................................................................................................................... P 9
┗ Foot Switch.................................................................................................................................................. P 10
■ Before Processing Laminate P 11
┗ About Laminate Film................................................................................................................................... P 1
1
■ Cold Laminate Processing P 12
┗ Installation and Processing of Cold Laminate Film..................................................................................... P 12
■ Maintenance P 15
┣ Cleaning of Roller........................................................................................................................................ P 15
┣ Cleaning of paper tube holder...................................................................................................................... P 15
┗ Cover the product with cloth after use......................................................................................................... P 15
■ Troubleshooting P 16
┣ Power does not turn on · machine does not function ................................................................................... P 16
┣ Product malfunctions or power is immediately turned off........................................................................... P 16
┣ Wrinkles are formed in the processing material........................................................................................... P 16
┗ Processing material cannot be inserted · does not come out........................................................................ P 16
■ Others P 17
┣ Product Specifications .................................................................................................................................P 17
┗ Contact......................................................................................................................................................... P 17
Table of Contents
2
Precautions before Use
▼Nameplate label (porting)
▼Rated label
▼Cover switch restriction label
▼Jamming and entangling warning
label
▼Grounding instruction label
Ground connection must be done.
▼Fuse label
▼Emergency stop switch label
▼Tension control label
This document uses symbols to explain the degree of harm and damage caused by incorrect use of the product and to
prevent harm on customers and others or damage on properties.
Warning
If this symbol is neglected and the product is handled incorrectly, serious injury or death may
occur.
Caution
If this symbol is neglected and the product is handled incorrectly, human injury or physical
damage on properties may occur.
This symbol indicates matters to be followed
to avoid injury.
This symbol prohibits disassembly of the
device for safety.
This symbol instructs the user to remove
power plug from the outlet for safety.
This symbol prohibits touching of the
product with wet hands.
This symbol instructs the user to connect
grounding for safety.
This symbol prohibits wetting of the
product by water.
This symbol warns the user about the risk of
hands rolling into the roller.
This symbol shows concern for electric
shock under improper handling.
This symbol shows concern for smoke and
ignition under improper handling.
Meaning of
Symbols
List of Labels Attached to the Product
3
Warning
Power cable included in the product must be used. Do not use power supply not indicated on the product.
Do not place heavy objects on power cable, place cables nearby heating devices, or complex wiring.
Do not process power cable or use damaged power cable.
Accurately insert to the end of electrode.
When inserting power cable, the plug must be held. Excessive bending, twisting or pulling can damage the cable interior
and cause electric shock, fire, and failure.
※ Contact our company or store when power cord is damaged.
Regularly remove power cable from the outlet to clean the root and gap of electrode. Do not insert cable with foreign
substances such as dust attached.
Do not install the product in places with high temperature and humidity or poor ventilation, places with combustible and explosive gas
or poisonous gas, places covered with dust, and on top of easily burnt objects. When installing against a wall, the product should be
placed at least 50cm away from the wall.
Do not approach the product to firearms, high temperature, metals, and easily burnt objects. Do not put liquids into the
machine.
Do not disassemble or remodel the machine.
Do not use the product in abnormal state such as smoke, strange odor, and noise. If such condition is found, immediately
turn off the power switch and remove power cable from the outlet before contacting the store or our company. The product
must never be repaired by the customer for safety purpose.
Caution
Power cable must be removed from the outlet when the product is not used for long time.
Do not insert power cable with wet hands.
Grounding must be connected before connecting power to power cable. Power cable must be removed before grounding
disconnection.
Especially, keep the product away from children.
Do not ride the product or put heavy objects on top.
Do not place the product in unstable places (oscillating place, slanted place, and place with vibration of other
machineries). The product may fall down or over to injure persons nearby.
Avoid direct wind from air conditioner.
Never block the air vent. Blocked air vent can cause failure or fire from accumulation of internal heat.
During operation or insertion of laminate, be careful about clothes such as neck tie and necklace and body parts from entering the
device.
When film glue is attached to the laminate roller, squeeze cloth stained with neutral detergent and wipe out. (※ Do not
clean with benzene, thinner, or sponge.)
Lift the roller for laminate processing.
When the machine is not used, cover with a cloth to keep away from direct light or fluorescent light. Light can result in
rapid degeneration of the laminate roller rubber.
For safety, transport this product after turning the power switch off and removing power cable from the outlet.
Precautions for Handling
4
This device shall be installed in the following places.
●Horizontal and stable place
Use as slanted or in unstable state may result in adverse effects such as paper return.
Also, unexpected accidents can occur.
●Place where exclusive power outlet is available
Do not use power types other than the rated voltage regulated on this Manual.
Grounding and earth leakage breaker must be installed.
●Place with low humidity and sound ventilation
Installation of this product in place with high humidity can result in short circuit or failure.
Avoid outdoor places and places with direct light or air conditioner wind.
●Workability
Secure sufficient space for workability.
Do not install the product too close to walls. If possible, space between the product and wall should be wide
enough to allow human passage.
Place for Installation
1000mm or more
500mm
or
more
500mm or more
500mm or more
5
Characteristics
●Pressure can be adjusted in 8 steps automatically
●Speed of laminate processing can be adjusted step by step
●Rotation and stopping of the roller can be done using foot switch
●Transparent safety cover
Confirmation of Parts
The following parts and documents are included in the main body.
If there is a missing part, contact a nearby business office of our company or store from which the product was
purchased.
`
Freesia-55C main body
Film shaft
Branch paper tube holder (3-inch)
Stand (assembly type)
Foot switch
Instruction Manual
(this document)
Hex wrench
(For paper tube holder)
3 EA
6 EA
Film shaft
Branch paper tube holder (3-inch)
3 EA
4 EA
Loading...