Lambretta V50 Special, V125 Special, V200 Special Assembly Manual

ASSEMBLY MANUAL

Date: 04.06.2018 Version: 1

Content

• General information

• Unboxing vehicle

• Scope of delivery

• Assembling of the components

• Inserting the battery

• Check oil level

• Check tire pressure

• Functional check before the test drive

• Test ride

General information

• Check the vehicle for transport damages before
starting assembling.

• Carry out the points carefully and step by step.

• Make sure that the vehicle is handed over visually

as well as technically awless.

1

2

3

Unboxing vehicle

• Remove the straps and lift off the box (1).

• Remove the cardboard boxes and the plastic cover
(2).

• Remove the holder (3) in the leg area.

• Remove the cartons (4) with which the vehicle is ja­cked up.

• Remove the bolts and cover (5) on the rear of the
vehicle.

4

5

Model:
VIN No.:

Page 1 / 6

V50 Special, V125 Special, V200 Special

VDLL*************

Created by:

Conrmed by:

Schorm
Groll

ASSEMBLY MANUAL LAMBRETTA V50, V125, V200

ASSEMBLY MANUAL

Date: 04.06.2018 Version: 1

Scope of delivery

The following parts are included in the helmet com­partment:

 2× Rear view mirrors
 1× Battery with battery uid container
 1× Box with 2 keys, 1 key tag and user manual
 1× Key attached to the vehicle
 1× Owner´s tool kit
 2× Handlebar weights
 1× Vehicle identication number cover
 1× Battery retaining plate bottom
 1× Battery retaining plate top
 2× M8 bolt
 5× M5 bolt

1

Assembling of the components

• Screw the two bolts (1) into the shown holes.

• Mount both mirrors and x the nuts, rst the lower
one (2) and then the upper one (3).

ATTENTION:

the left mirror has a right-hand thread
the right mirror has a left-hand thread

• Remove the cover (4), inserted the handlebar
weights (5) into the handlebar end and tighten the
bolt inside the handlebar weights. Then mount the
cover. again.

ATTENTION:

On the right side of the handlebar, make sure that
the handlebar weight is not inserted too far into
the handlebar, otherwise the proper function of the
throttle will be affected. AFTER INSTALLATION,
CHECK WETHER THE THROTTLE LEVER IS WOR­KING PROPERLY!

2

3

45

Model:
VIN No.:

Page 2 / 6

V50 Special, V125 Special, V200 Special

VDLL*************

Created by:

Conrmed by:

Schorm
Groll

ASSEMBLY MANUAL LAMBRETTA V50, V125, V200