Lakeside Foodservice 927 Specifications
Item #
uantity
Q
Mobile Self-Leveling Cabinets
Adjust-a-Fit®Adjustable Diameter - Heated
Adjustable Diameter And Dispensing
Height Adjustments Without Tools
Four tube sizes, each with a 3-1/4” diameter
•
adjustment range.
Height adjustment springs detach and attach
•
from inside the dispenser. No need to remove
dispenser from mobile unit.
All-welded stainless steel construction.
•
Corner bumpers protect cabinet, furniture
•
and doors.
Easy-Glide™design provides quiet, non-stick
•
operation.
Each heated dispenser features its own
•
thermostatic control.
4” Lake-Glide®casters - all swivel, 2 each
•
Model 927
with brake.
Specifications
Mobile Cabinet: Mobile cabinets shall be of all-welded stainless steel construction, with 18 gauge top and 20-
gauge sides and bottom and shall include bottom perimeter bumper. Cabinet bottom shall have center clean out
hole. Casters shall be 4” (102 mm) diameter extra-load swivel (two with locking brake). Unit shall feature a heavyduty independent undercarriage frame of galvanized steel to which casters shall be mounted. Units shall be NSF
listed.
Dispenser Tubes: Dispenser tubes shall be of welded stainless steel construction and shall drop in to mobile
cabinet top openings. Dispensers shall hang from cabinet opening by an 18-gauge flange ring and feature three
each 22-gauge vertical side supports welded to 20-gauge bottom plate. Self-leveling dish carriage shall be of
welded stainless steel construction and shall travel vertically in dispenser tube with three sets of nylon roller
guides running in vertical tracks for smooth operation. Carriage shall have 22-gauge removable dish platform.
Dispensers shall feature flange mounted perimeter extension springs, which are detachable from the dish carriage to provide proper dish height adjustment without tools. Dispensers shall also feature three stainless steel
dish guides running the entire height of the dispenser. Dish guides shall pivot to provide diameter adjustability of
3-1/4” (83 mm) without tools or removing components to accommodate various diameter dishes. Each dispenser
shall have a vertical stacking capacity of 26” (660 mm).
Heating System: Unit shall be 120 VAC 60 Hz and shall have 6´ (1829 mm) coiled power supply cord with
5-15P NEMA plug for 120 VAC. Cabinet shall have interior mounted electrical junction box with twist-lock
receptacles for individual power to each dispenser. Dispenser tubes shall be fully enclosed in 22-gauge stainless
steel, and have a circular bottom mounted 300 or 450 watt heater element to provide convection heat. Heating
system shall feature thermostatic control in a tamper protective location with safe high-end shut-off. Control shall
have Infinite settings between low and high temperature cut-outs. Thermostat shall be field adjustable for average
interior air temperature between 100°F (38°C) and 175° F (79°C) at middle adjustable thermostatic setting. On-off
switch and power indicator light shall be mounted on top flange of dispenser. Average dish temperature rise of
40°F (22°C) above ambient shall be achieved within one hour of initial heating cycle at middle adjustable
thermostatic setting. Cabinet and dispenser tubes shall be U.L. listed.
Spec. # AIA #
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLCA H Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-6H
Mobile Self-Leveling Cabinets
Adjust-a-Fit®Adjustable Diameter - Heated
L
H
W
H H
Top
Views
W
W
L
AutoCAD drawings available through KCL CADalog
L
H
W
Dimensions
Model
Adjusts To Fit Plate Size
W
2-Stack Models
917 4-1/4” to 7-1/2” (108 to 191)
927 6-1/2” to 9-3/4” (165 to 248)
937 8-3/4 to 12” (222 to 305)
Spec. # AIA #
3-Stack Models
955 4-1/4” to 7-1/2” (108 to 191)
965 6-1/2” to 9-3/4” (165 to 248)
975 8-3/4 to 12” (222 to 305)
17-1/4”
17-1/4”
19-1/2”
17-1/4”
17-1/4”
19-3/16”
30-5/8” 39-1/8” (438
30-5/8” 39-1/8” (438
35-1/8” 39-1/8” (495
45” 39-1/8” (437
45” 39-1/8” (437
51-13/16” 39-1/8” (487
4-Stack Models
919 4-1/4” to 7-1/2” (108 to 191) 30-5/8” 30-5/8” 39-1/8” (778
929 6-1/2” to 9-3/4” (165 to 248) 30-5/8” 30-5/8” 39-1/8” (778
Overall Size Electrical
L H (W
L
H) Watts Amps
778
994) 600 5.0 113 (51.3)
778
994) 900 7.5 126 (57.2)
892
994) 900 7.5 142 (64.4)
937
994) 900 7.5 151 (68.5)
1316
1316
Measurements in ( ) denote metric millimeters, unless otherwise specified.
994) 1350 11.3 167 (75.8)
994) 1350 11.3 175 (79.4)
778
994) 1200 10 190 (86.2)
778
994) 1350 11.3 196 (88.9)
lbs. (kg.)
OPTIONAL ACCESSORIES
• Stainless steel dispenser tube covers • 208/240 VAC 60Hz (heated models)
• Laminate or vinyl decorative exterior finishes • 220 VAC 50 Hz (heated models)
• Full-perimeter bumper
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLCAH Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-6H
Loading...