Lakeside Foodservice 92225 Specifications
Spec. # AIA #
Specifications
Lit# 0307 DISLDA25 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
Adjustable Diameter And Dispensing
Height Adjustments Without Tools
Overall height allows for fit into ADAheight-
compliant counters.
Five tube sizes, each with a 3¼ ” diameter
adjustment range.
Heated dispensers feature thermostatic control.
Thermostat minimum 100°F (38°C) - maximum
175°F (79°C).
All models have a 22” plate stacking
capacity.
Model 92225
Open
Model 92425
Heated
Model 92325
Shielded
SL-225
Drop-in Self-Leveling Dispensers
Item #
Quantity
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Unit shall be of welded stainless steel construction. Dispensers shall hang from surface opening by an 18-gauge
flange ring and feature three each 22-gauge vertical side supports welded to 20-gauge bottom plate. Overall
height from flange ring to base of 25” shall allow for fit into ADAheight-compliant counters. Self-leveling dish
carriage shall be of welded stainless steel construction and shall travel vertically in dispenser tube with 3 sets of
nylon roller guides for smooth operation. Carriage shall have 22-gauge removable dish platform. Unit shall
feature flange mounted perimeter extension springs, which are detachable from the dish carriage to provide
adjustment without tools for different weight dishes. Unit shall also feature three stainless steel dish guides
running the entire height of the dispenser. Dish guides shall pivot to provide diameter adjustability of 3-1/4” (83
mm) without tools or removing components to accommodate various diameter dishes. Unit shall have a vertical
plate stacking capacity of 22” (559 mm). Unit shall be NSF listed.
Adjust-a-Fit®- Open, Shielded and Heated, ADA Height
Specifications continued on back.
Drop-in Self-Leveling Dispensers
Adjust-a-Fit®- Open, Shielded and Heated
Spec. # AIA #
Dimensions
Lit# 0307 DISLDA25 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
OPTIONAL ACCESSORIES
• Stainless steel dispenser covers
• 208/240 VAC 60Hz (heated models)
• 220 VAC 50 Hz (heated models)
Specifications Continued
Heated Models Only: Unit shall be 120 VAC 60 Hz and shall have 5´ (1524 mm) power supply cable
with L15-5P NEMA twist lock plug for 120 VAC. Dispenser tubes shall be fully enclosed in 22 gauge
stainless steel, and have a circular bottom mounted 300 or 450 watt heater element to provide convection heat. Heating system shall feature thermostatic control in a tamper protective location with safe
high-end shut off. Control shall have infinite settings between low and high temperature cut-outs.
Thermostat shall be field adjustable for average interior air temperature between 100° F (38° C) and
175° F (79° C) at middle adjustable thermostatic setting. On-off switch and power indicator light shall be
mounted on top flange of dispenser. Average dish temperature rise of 40° F (22° C) above ambient
shall be achieved within one hour of initial heating cycle at middle adjustable thermostatic setting. Unit
shall be UL listed.
AutoCAD drawings available through KCL CADalog
Measurements in ( ) denote metric millimeters, unless otherwise specified.
SL-225
Specification sheets available at www.eLakeside.com
A
B
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Model
Accommodates Plate Size
Height To Ring
(A)
Top Ring Diameter
(B)
Counter Cut-Out
Electrical
lbs. (kg.)
Watts Amps
Open Models
90225 2-3/4” to 6” (970 to 152)
25”
(635) 10” (254)
9-1/8”
(232) _ _ 13 (5.9)
91225 4-1/4” to 7-1/2” (108 to 191)
25”
(635) 11-1/2” (292)
10-5/8”
(270) _ _ 15 (6.8)
92225 6-1/2” to 9-3/4” (165 to 248)
25”
(635) 13-3/4” (349)
12-7/8”
(327) _ _ 18 (8.2)
93225 8-3/4 to 12” (222 to 305)
25”
(635) 16” (406)
15-1/8”
(384) _ _ 20 (9.1)
194225 10” to 13-1/4” (254 to 337)
25”
(635) 17-1/16” (432)
16-1/4”
(413) _ _ 21 (9.6)
Shielded Models
90325 2-3/4” to 6” (970 to 152)
25”
(635) 10” (254)
9-1/8”
(232) _ _ 20 (9.1)
91325 4-1/4” to 7-1/2” (108 to 191)
25”
(635) 11-1/2” (292)
10-5/8”
(270) _ _ 22 (10)
92325 6-1/2” to 9-3/4” (165 to 248)
25”
(635) 13-3/4” (349)
12-7/8”
(327) _ _ 27 (12.2)
93325 8-3/4 to 12” (222 to 305)
25”
(635) 16” (406)
15-1/8”
(384) _ _ 31 (14.1)
194325 10” to 13-1/4” (254 to 337)
25”
(635) 17-1/16” (432)
16-1/4”
(413) _ _ 32 (14.5)
Heated Models
91425 4-1/4” to 7-1/2” (108 to 191)
25”
(635) 11-1/2” (292)
10-5/8”
(270) 300 2.5 25 (11.3)
92425 6-1/2” to 9-3/4” (165 to 248)
25”
(635) 13-3/4” (349)
12-7/8”
(327) 450 3.8 30 (13.6)
93425 8-3/4 to 12” (222 to 305)
25”
(635) 16” (406)
15-1/8”
(384) 450 3.8 34 (15.4)
194425 10” to 13-1/4” (254 to 337)
25”
(635) 17-1/16” (432)
16-1/4”
(413) 450 3.8 35 (15.9)
Loading...