Lakeside Foodservice 8535 Specifications
Item #
Quantity
Universal Ledge Racks
Welded Aluminum
Ideal transport and storage for a
wide variety of pans, trays and
containers.
Durable, lightweight welded aluminum
constuction.
Rugged square tubing frame provides
durability and long life.
Accommodates a variety of pans, trays, or
storage boxes.
Ledges are 6-1/4” wide and are
welded on 4½” centers.
All seams are fully welded and sealed to
provide a smooth, easy-to-clean surface.
No cracks or crevices to trap dirt!
Spec. # AIA #
Welded corner gussets maintain square
unit integrity.
Casters are 5” swivel plate type with
No-Mark® polyurethane tread.
NSF listed.
Model 8535
Specifi cations:
Shall be constructed of hi-tensile, corrosion resistant, rust proof, primary extruded aluminum, Type
6063-T5 alloy. All seams shall be heli-arc welded with all welded and sealed (no rivets). Vertical uprights
shall be extruded tube, 1¼” x 1½” x .070 wall. Top and bottom frames shall be extruded tube, 1¼” x 1½”
x .070 wall, welded and shall be welded to uprights. Bottom frame has caster plates (pre-tapped), 3/8”
thick, welded to frame so that casters are inset. Gussets of 1½” x 1½” x 5/8” thick angle are welded to
the inside angles (bottom side) where horizontal cross bracing meets vertical uprights with a 4-½” continuous weld. Two each tie rods of 1” x 1” x .070 wall extruded tube shall be welded to uprights. Extruded
angle ledges are a stepped type, 2” x 6¼” x .100 thick, with all corners chamfered and deburred. Ledges
are welded to uprights on 4-½” centers. Casters shall be all swivel with 5” diameter, non-markeing polyurethane tire, 1-¼” wide, with an operating temperature range of -25°F to +190°F. Wheel bearings shall
be sealed and permanently lubricated.
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# UAR 0306 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
PR-4
Universal Ledge Racks
Welded Aluminum
Spec #
Dimensions:
Model 8534
Model 8535
AIA #
Number Of Ledge Overall Size Case Wt.
Model Ledges (Pair) Type Spacing W D H Lbs.
8534
8535
12
13
Universal
6¼” Wide
Universal
6¼” Wide
Options:
Break casters (set of 2)
Pan stop
Perimeter bumper
Bottom corner bumpers (set of 4)
Vertical leg bumpers (set of 4)
Solid sheet base
4½" 24½" 25¼" 64½" 90
(114) (622 641 1638) (40.5 kg)
4½" 24½" 26" 70" 92
(114) (622 660 1778) (41.4 kg)
Pan, Tray, or Rack Capacity:
Pan/Tray/Rack Model 8534 Model 8535
18” x 26” 12 13
16” x 22” 12 13
15” x 20” 12 13
14” x 18” 24 26
12” x 20” (4” High) 24 26
20” x 20” (4” High) 12 13
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# UAR 0306 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
PR-4
Loading...