Lakeside Foodservice 8528 Specifications

Open Pan & Tray Racks

Aluminum

Durable, efficient storage
system with all-welded
aluminum construction.

 Channel and angle style ledges are

continuously welded to the uprights
to withstand rugged use.

 Reinforced bottom design provides

added durability during offsite

transport.

 Accomodates 18" x 26" or 14" x 18"

pans and trays.

 Non-marking polyurethane casters

Item #

Quantity

Spec. # AIA #

 NSF listed.

Ideal for...

 Hotels, schools, hospitals, and other

commercial kitchens.

 Refrigerated or dry storage.

 Inside or remote transport.

Model 8528

Specifi cations

Shall be constructed of hi-tensile, corrosion-resistant, rust proof, primary extruded aluminum, Type
6463-T5 alloy. All seams shall be heli-arc welded and sealed (no rivets). Tray ledges 1-¼” x 1-5/8” x .100
extruded aluminum welded to frame on 3” or 5” centers, with channel type ledges to be on 1½” centers.
Unit shall have four horizontal supports located at the top and center of 1” x 1” x .070 wall aluminum tube.
Corner gussets of 1-½” x 1-½” x 5/8” thick angle shall be welded to the inside angles (bottom side) where
horizontal cross bracing meets vertical uprights with a 4½” continuous weld. Unit base shall be constructed
of 1” x 1” x .070 wall tube welded into a rectangular frame (20-½” x 26”), with two extra laterals where
caster mount reinforcement plates shall be inset. reinforcement caster plates (2-¾” x 4” x 3/8”), pre-tapped
for ¼” bolts, shall be welded to this frame. Casters shall be plate mount type, with 5” diameter non-marking
polyurethane wheel, full swivel design (two with brakes) with sealed ball bearing races.

Model 8559

Lakeside Manufacturing, Inc.

4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax [phone] • www.eLakeside.com

Lit# APTR 0306 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.

PR-6

Open Pan & Tray Racks

Aluminum

Spec. #

Model 8528

Model 8559

Dimensions

Pan/Tray Capacity Ledge Overall Size Case Wt.

Model Full Size Half Size Type Spacing W L H Lbs.

8522

8528

8529

8547

8559

AIA #

Options

 Break casters (set of 2)  Pan stop
 Perimeter bumper  Bottom corner bumpers (set of 4)
 Vertical leg bumpers (set of 4)  Solid sheet base

Lit# APTR 0306 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.

18 36 Angle

11 22 Angle

18 36 Angle

34 68 Channel

38 76 Channel

3" 20½" 26" 63" 42

(76) (521 660 1600) (18.9 kg)

5" 20½" 26" 64" 38

(127) (521 660 1626) (17.1 kg)

3" 20½" 26" 64" 48
(76) (521 660 1626) (21.6 kg)
1½" 20½" 26" 64" 53
(38) (521 660 1626) (23.9 kg)
1½" 20½"
(38) (521

Measurements in ( ) denote metric millimeters, unless otherwise specifi ed.

Lakeside Manufacturing, Inc.

4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax [phone] • www.eLakeside.com

26"

660

69" 56

1753) (25.2 kg)

PR-6