Lakeside Foodservice 8209 Specifications
Item #
uantity
Q
Mobile Self-Leveling Dispensers
Open Tubular Style - Heated
Economical Tubular Frame Design
High-strength easy-to-clean stainless steel
•
tubular frame.
Easy field adjustment for plate height, no
•
tools required.
Easy-Glide™design provides quiet, non-
•
stick operation.
4” Lake-Glide®casters - all swivel, 2 each
•
with brake.
Each heated dispenser features its own
•
thermostatic control.
Height adjustment springs detach and attach
•
Model 8209
from inside the dispenser. No need to remove
dispenser from mobile unit.
Spec. #
Specifications
Mobile Frame: Mobile frame shall be of 18-gauge wall stainless steel 1” tubing. Tubing frame shall be of
"U-frame" design with bottom tie bars for extra strength. Units shall have 18-gauge top and bottom
shelves to provide dispenser tube stability. Top and bottom shelves shall be bolted to tubular frame.
Casters shall be 4” (102 mm) diameter extra-load swivel stem type (two with locking brake). Units shall
be NSF listed.
Dispenser Tubes: Dispenser tubes shall be of welded stainless steel construction and shall drop into
mobile unit top and bottom shelf openings. Dispensers shall be fully enclosed in 22-gauge stainless
steel, shall hang from top shelf opening by an 18-gauge flange ring, and feature three each 22-gauge
vertical side supports welded to 20-gauge bottom plate. Self-leveling dish carriage shall be of welded
stainless steel construction and shall travel vertically in dispenser tube with nylon guides for smooth
operation. Carriage shall have 22-gauge removable dish platform. Dispensers shall feature flange
mounted perimeter extension springs, which are detachable from the dish carriage without tools to
provide adjustment for different weight dishes. Each dispenser shall have a vertical stacking capacity of
25” (635 mm).
Heating System: Unit shall be 120 VAC 60 Hz and shall have 6’ (1829 mm) power supply cord with
5-15P (5-20P on Models 8409 and 8410) NEMA plug for 120 VAC. Mobile frame shall have
electrical junction box mounted under bottom shelf, with hard wired power cable to each dispenser.
Dispenser tubes shall have a circular bottom mounted 300 or 450 watt heater element to provide
convection heat. Heating system shall feature thermostatic control in a tamper protective location with
safe high-end shut off. Control shall have Infinite settings between low and high temperature cut-outs.
Thermostat shall be field adjustable for average interior air temperature between 100°F (38°C) and
175°F (79°C) at middle adjustable thermostatic setting. On-off switch and power indicator light shall be
mounted on top flange of dispenser. Average dish temperature rise of 40°F (22°C) above ambient shall
be achieved within one hour of initial heating cycle at middle adjustable thermostatic setting. Mobile
tubular frame and dispenser tubes shall be UL listed.
AIA #
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLDTH Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-3H
Mobile Self-Leveling Dispensers
Open Tubular Style - Heated
AutoCAD drawings available through KCL CADalog
L
H
Two Stack Models
Dimensions
W L H Watts Amps
16½”
31”
(438
787
16½”
31”
(438
787
16½”
31”
(438
787
16½”
31”
(438
787
16½”
31”
(438
787
16½”
31”
(438
787
16½”
31”
(438
787
17¾”
35½”
(451
902
17¾”
35½”
(451
902
Spec. # AIA #
Model
8200
8205
8206
8207
8208
8209
8210
8211
8212
Accommodates
Plate Size
Up to 5”
(127)
5-7/8” to 6-1/2”
(149 to 165)
5-7/8” to 6-1/2”
(149 to 165)
6-5/8” to 7-1/4”
(168 to 184)
7-3/8” to 8-1/8”
(187 to 206)
8-1/4” to 9-1/8”
(210 to 232)
9-1/4” to 10-1/8”
(235 to 257)
10-1/4” to 11”
(260 to 279)
11-1/4” to 12-1/4”
(286 to 311)
Optional Accessories
• Stainless steel dispenser covers
• 208/240 VAC 60Hz
• 220 VAC 50 Hz
• Round corner bumpers (set of four)
Top View
W
H
L
H
Dimensions
Three Stack Models
Electrical
385/16”
385/
385/
385/16”
385/
385/16”
385/16”
385/16”
385/16”
Measurements in ( ) denote metric millimeters, unless otherwise specified.
989)
989)
989)
989)
989)
989)
989)
989)
989)
”
6
1
”
6
1
”
6
1
600 5.0
600 5.0
600 5.0
600 5.0
600 5.0
900 7.5
900 7.5
900 7.5
900 7.5
Ship
Weight
73
(33.1 kg)
75
(34.0 kg)
78
(35.4 kg)
79
(35.8 kg)
86
(39.0 kg)
90
(40.8 kg)
93
(42.2 kg)
95
(42.8 kg)
96
(43.6 kg)
Accommodates
Model
8300
8305
8306
8307
8308
8309
8310
Plate Size
Up to 5”
(127)
5-7/8” to 6-1/2”
(149 to 165)
5-7/8” to 6-1/2”
(149 to 165)
6-5/8” to 7-1/4”
(168 to 184)
7-3/8” to 8-1/8”
(187 to 206)
8-1/4” to 9-1/8”
(210 to 232)
9-1/4” to 10-1/8”
(235 to 257)
Four Stack Models
Accommodates
Model
8400
8405
8406
8407
8408
8409
8410
Plate Size
Up to 5”
(127)
5-7/8” to 6-1/2”
(149 to 165)
5-7/8” to 6-1/2”
(149 to 165)
6-5/8” to 7-1/4”
(168 to 184)
7-3/8” to 8-1/8”
(187 to 206)
8-1/4” to 9-1/8”
(210 to 232)
9-1/4” to 10-1/8”
(235 to 257)
Top View
L
Dimensions
W L H Watts Amps
45¾”
1162
45¾”
1162
45¾”
1162
45¾”
1162
45¾”
1162
45¾”
1162
45¾”
1162
31”
787
31”
787
31”
787
31”
787
31”
787
31”
787
31”
787
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
385/16”
989)
16½”
(438
16½”
(438
16½”
(438
16½”
(438
16½”
(438
16½”
(438
16½”
(438
Dimensions
W L H Watts Amps
31”
(787
31”
(787
31”
(787
31”
(787
31”
(787
31”
(787
31”
(787
W
Electrical
900 7.5
900 7.5
900 7.5
900 7.5
900 7.5
1350 11.3
1350 11.3
Electrical
1200 10.0
1200 10.0
1200 10.0
1200 10.0
1200 10.0
1800 15.0
1800 15.0
Ship
Weight
101
(45.8 kg)
104
(47.2 kg)
106
(48.1 kg)
109
(49.4 kg)
115
(52.1 kg)
120
(54.4 kg)
124
(56.3 kg)
Ship
Weight
115
(52.1 kg)
120
(54.4 kg)
121
(54.9 kg)
122
(55.3 kg)
146
(66.2 kg)
152
(69.0 kg)
157
(71.2 kg)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLDTH Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-3H
Loading...