Lakeside Foodservice 773 Specifications
Item #
uantity
Q
Mobile Self-Leveling Dispensers
Open Tubular Style - Adjust-a-Fit®Adjustable Diameter
Adjustable Diameter And Dispensing
Height Adjustments Without Tools
Three tube sizes, each with a 3¼” diameter
•
adjustment range.
Height adjustment springs detach and attach
•
from inside the dispenser. No need to remove
dispenser from mobile unit.
High-strength easy-to-clean stainless steel
•
tubular frame.
Easy-Glide™design provides quiet, non-stick
•
operation.
Each heated dispenser features its own
•
thermostatic control.
4” Lake-Glide®casters - all swivel, 2 each
•
with brake.
Model 773
Optional Round
Corner Bumper
Specifications
Mobile Frame: Mobile frame shall be of 18-gauge wall stainless steel 1” tubing. Tubing frame shall be of
"U-frame" design with bottom tie bars for extra strength. Units shall have 18-gauge top and bottom shelves to
provide dispenser tube stability. Top and bottom shelves shall be bolted to tubular frame. Casters shall be 4”
(102 mm) diameter extra-load swivel stem type (two with locking brake). Units shall be NSF listed.
Dispenser Tubes: Dispenser tubes shall be of welded stainless steel construction and shall drop into top and
lower shelf openings. Dispensers shall hang from top shelf opening by an 18-gauge flange ring and feature three
each 22-gauge vertical side supports welded to 20-gauge bottom plate. Self-leveling dish carriage shall be of
welded stainless steel construction and shall travel vertically in dispenser tube with three sets of nylon roller
guides running in vertical tracks for smooth operation. Carriage shall have 22-gauge removable dish platform.
Dispensers shall feature flange mounted perimeter extension springs, which are detachable from the dish carriage to provide proper dish height adjustment without tools. Dispensers shall also feature three stainless steel
dish guides running the entire height of the dispenser. Dish guides shall pivot to provide diameter adjustability of
3-1/4” (83 mm) without tools or removing components to accommodate various diameter dishes. Each dispenser
shall have a vertical stacking capacity of 25” (635 mm).
Heated Models Only
NEMA plug for 120 VAC. Cabinet shall have interior mounted electrical junction box with twist-lock receptacles for
individual power to each dispenser. Dispenser tubes shall be fully enclosed in 22-gauge stainless steel, and have
a circular bottom mounted 300 or 450 watt heater element to provide convection heat. Heating system shall
feature thermostatic control in a tamper protective location with safe high-end shut-off. Control shall have Infinite
settings between low and high temperature cut-outs. Thermostat shall be field adjustable for average interior air
temperature between 100°F (38°C) and 175° F (79°C) at middle adjustable thermostatic setting. On-off switch
and power indicator light shall be mounted on top flange of dispenser. Average dish temperature rise of 40°F
(22°C) above ambient shall be achieved within one hour of initial heating cycle at middle adjustable thermostatic
setting. Mobile frame and dispenser tubes shall be U.L. listed.
: Unit shall be 120 VAC 60 Hz and shall have 6´ (1829 mm) power supply cord with 5-15P
Spec. # AIA #
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLTA Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-3A
Mobile Self-Leveling Dispensers
Open Tubular Style - Adjust-a-Fit®Adjustable Diameter
Top
Views
Model 776
Dimensions
Model
Adjusts To Fit Plate Size
odel 782
M
AutoCAD drawings available through KCL CADalog
Overall Size Electrical
W
L H (W
L
H) Watts Amps
Model 792
lbs. (kg.)
2-Stack Unheated Models
772 4-1/4” to 7-1/2” (108 to 191)
773 6-1/2” to 9-3/4” (165 to 248)
774 8-3/4 to 12” (222 to 305)
17-3/4”
17-3/4”
17-3/4”
35-1/2” 38-5/16” (457
35-1/2” 38-5/16” (457
35-1/2” 38-5/16” (457
902
989) -- -- 87 (39.5)
902
989) -- -- 95 (43.1)
902
989) -- -- 105 (47.6)
3-Stack Unheated Models
782 4-1/4” to 7-1/2” (108 to 191)
783 6-1/2” to 9-3/4” (165 to 248)
784 8-3/4 to 12” (222 to 305)
17-3/4”
17-3/4”
17-3/4”
45-3/4” 38-5/16” (451
45-3/4” 38-5/16” (451
52-1/2” 38-5/16” (451
1162
1162
1334
989) -- -- 119 (54.0)
989) -- -- 129 (58.5)
989) -- -- 142 (64.4)
4-Stack Unheated Models
792 4-1/4” to 7-1/2” (108 to 191) 31” 31” 38-5/16” (664
Spec. # AIA #
793 6-1/2” to 9-3/4” (165 to 248) 31” 31” 38-5/16” (664
664
989) -- -- 141 (64.0)
664
989) -- -- 153 (69.4)
2-Stack Heated Models
776 4-1/4” to 7-1/2” (108 to 191)
777 6-1/2” to 9-3/4” (165 to 248)
778 8-3/4 to 12” (222 to 305)
17-3/4”
17-3/4”
17-3/4”
35-1/2” 38-5/16” (457
35-1/2” 38-5/16” (457
35-1/2” 38-5/16” (457
902
989) 600 5.0 93 (42.2)
902
989) 900 7.5 102 (46.3)
902
989) 900 7.5 113 (51.3)
3-Stack Heated Models
786 4-1/4” to 7-1/2” (108 to 191)
787 6-1/2” to 9-3/4” (165 to 248)
788 8-3/4 to 12” (222 to 305)
17-3/4”
17-3/4”
17-3/4”
45-3/4” 38-5/16” (451
45-3/4” 38-5/16” (451
52-1/2” 38-5/16” (451
1162
1162
1334
989) 900 7.5 127 (57.6)
989) 1350 11.3 139 (63.1)
989) 1350 11.3 153 (69.4)
4-Stack Heated Models
796 4-1/4” to 7-1/2” (108 to 191) 31” 31” 38-5/16” (664
797 6-1/2” to 9-3/4” (165 to 248) 31” 31” 38-5/16” (664
664
989) 1200 10 147 (66.7)
664
989) 1350 11.3 161 (73.0)
Measurements in ( ) denote metric millimeters, unless otherwise specified.
OPTIONAL ACCESSORIES
• Stainless steel dispenser tube covers • 208/240 VAC 60Hz (heated models)
• 220 VAC 50 Hz (heated models) • Round corner bumpers
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 SLTA Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-3A
Loading...