Lakeside Foodservice 7500 Specifications
Heated Pellet/Plate Dispenser
Features
•
Duo-Therm™ Model 7500 has two
heated compartments, one for plates and
one for pellets, which are independently
controlled and have an automatic hi-temp
shut-off.
•
Accommodates dishes and pellets ranging
from 7” to 10-1/4”
•
Dispenser cabinet is insulated to support
heat retention.
•
Self-leveling, field adjustable dispensers are
removable for convenient cleaning and
adjustment.
•
Maneuvers easily on 4 each, 5” LakeGlide®casters - all swivel, 2 with brakes.
•
Push handle for easy mobility.
Spec. # AIA #
Specifications
CABINET: Exterior shall be constructed on 18-gauge 300 Series stainless steel. Inner wall of cabinet shall be constructed of .063 high-strength aluminum. All sides and top of cabinet shall be insulated with fiberglass for heat retention and energy efficiency. Cabinet lids shall feature hat channel
design that does not require a gasket. Unit shall feature two separately controlled interior compartments, each with a self-leveling dispenser. Each compartment shall have a dedicated heating system featuring separate heater element, forced air fan, thermostatic control, and on/off switch. The
heating system shall be thermostatically controlled, using forced air with a 3200-watt element to heat
each cabinet interior compartment. The plate compartment shall have a thermostatically controlled
temperature range of 135°-175°F. The pellet compartment shall have a thermostatically controlled
temperature range of 250°-290°F. Unit shall be 208/220-240 VAC, 60 Hz and shall feature a 6’ long
20 amp power cord with NEMA 6-20P plug. Cabinet shall be mounted on four 5” extra-load swivel
casters (two with brake) with non-marking cushion tread wheel. Unit shall be UL and NSF listed.
Lit# 0602 SLHPDDT Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
Model 7500
Removable dispensing
unit
Specifications continued on back.
DUO-THERM™Self-Leveling
Item #
Quantity
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53217 U.S.A.
800-558-8565 • 414-481-3900 • Fax 414-481-9313 • www.eLakeside.com
H-2
Heated Pellet Dispenser
DUO-THERM™Self-Leveling
Spec. # AIA #
Dimensions
Lit# 0602 SLHPDDT Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
AutoCAD drawings available through KCL CADalog
Model
Stack
Height
Overall Size
Lake-Glide
®
Casters
WD H
Case Weight Case Cube
Type Dia. Lbs. (Kg) Cu. ft.
7500
Duo-Therm
27”
2 Stack
36”
(914)
24”
(610)
42-3/4”
(1086)
4 swivel,
2 with
brakes
5”
(127)
285 (129.3) 32.7 3200
Electrical
Specifications
(m
3
)
(.93)
Watt Amp Volt
17.2
208/220-240
60 Hz
Measurements i n ( ) denote metric millimeters, unless otherwise specified.
DISPENSERS: Self-leveling dispensers shall be constructed of stainless steel with self-lubricating
bearings that ride over vertical guide rods to prevent carriage binding. Self-leveling tension shall be
adjusted without tools by hooking or unhooking tension springs from the carriage. Carriage shall have
a vertical movement of 24”, and shall accommodate a 27” high stack of pellet bases or dishes that
are between 7” and 10-1/4” in diameter. Dispensers shall feature lift-out handles for easy removal
from cabinet for cleaning and adjustment.
Specifications Continued
Top View
H
D
W
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53217 U.S.A.
800-558-8565 • 414-481-3900 • Fax 414-481-9313 • www.eLakeside.com
H-2
Loading...