Lakeside Foodservice 6571 Specifications

Heating/Proofing Cabinets for Sheet Pans
Insulated and Non-insulated Stainless Steel
Item # _____________ Quantity ___________
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A. 800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-5
General Specifications
Shall be of stainless steel construction, to hold 18" x 26" (457 x 660 mm) pans and trays. Welded tubular base frame shall be 1" square, heavy gauge stainless steel tubing, with 10-gauge stainless steel reinforcing plates at corners. Insulated Models: High density fiberglass insulation throughout; top, back, bottom, sides, and door(s). Non-insulated Models: High density fiberglass insulated door. Door shall be attached to cabinet with heavy-duty lift-off hinges, which provide for 270° swing and be held open by magnetic door latch. Each door has paddle latch. Cabinet has recessed handles. Bottom corner bumpers shall be standard. Polyurethane tire casters in a configuration of two (2) rigid, and two (2) swivel with brake. Casters shall have a reinforced yoke welded to 10-gauge caster mounting plate. The caster mounting plate shall be secured to a 10-gauge stainless steel reinforcing stress plate via welded in place stainless steel studs. The reinforcing stress plates shall be welded to the heavy gauge tubular frame of the unit. Unit shall have removable proofer / heating unit (120 VAC, 16 amp, 1920 watts, 5-20P NEMA plug) with individual controls for heat and humidity settings. Controls shall be easily accessed from the front without opening the door. Proofer / heating unit shall also feature a water reservoir.
Ideal for dough proofing and holding of cooked foods.
Durable welded stainless steel construction.
Heavy-duty blower distributes hot air evenly throughout the cabinet.
Heat and humidity controls are conveniently located on the outside of the cabinet.
Full-pan top and bottom design provide added durability during offsite transport.
Accommodates 18" x 26" trays/pans.
Single door and double dutch door versions are available.
Heating unit is removable for easy cleaning.
NSF and UL listed.
Spec. # ____________________________________ AIA# ____________________________________
Model 6571
C
U
L
®
NSF
®
Sheet Pan Tray Ledges
Heating/Proofing Cabinets for Sheet Pans
Insulated and Non-insulated Stainless Steel
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A. 800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-5
Insulated Models
Pan Capacity Ledge Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg) 16570 5 10 3
"
Single 25.5"34.75"33"180 (82)
(76) (648 883 838)
16571 9 18 3
"
Single 25.5"34.75"44.5"240 (109)
(76) (648 883 1130)
16572 14 28 3
"
Single 25.5"34.75"59.5"280 (127)
(76) (648 883 1511)
16573 17 34 3
"
Single 25.5"34.75"68.5"300 (136)
(76) (648 883 1740)
Non-insulated Models
Options
• Full Perimeter Bumper
• All Swivel Lake-Glide Casters
• Floor Lock Centered
• Additional Tray Slides (Pair)
• Transport Door Latch
• Magnetic Door Latch
• Dutch Doors (Model 16573 and 6573)
• Clear Polycarbonate Door
• Vented Doors (single door only)
• Left-Hand Door Hinging
• Voltage 220 Volt, 50/60 Hz, Single Phase
• Transport Package
AIA# ____________________________________ Spec.# ___________________________________
Measurements in ( ) denote metric millimeters, unless otherwise specified.
16570 16571 16572 16573 16574 Side View
6570 6571 6572 6573 6574 Side View
Pan Capacity Ledge Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg)
6570 5 10 3
"
Single 25.375"33.75"31.5"150 (68)
(76) (644 857 800)
6571 9 18 3
"
Single 25.375"33.75"45"190 (86)
(76) (644 857 1143)
6572 14 28 3
"
Single 25.375"33.75"60"230 (105)
(76) (644 857 1524)
6573 17 34 3
"
Single 25.375"33.75"69"270 (123)
(76) (644 857 1753)
Dimensions
Top View
Loading...