Lakeside Foodservice 5500 Specifications
Item #
Quantity
Room Service And Late Tray Trucks
Elite SeriesTM - Stainless Steel
Designed For Healthcare
Insulated Room Service And
Late Tray Meal Trays.
Accommodate 14” x 18” or 15” x 20”
size trays.
Doors open 270° for unobstructed
access.
Paddle latch door catch assures
positive door closure and convenient
one-hand opening.
Sturdy welded tubular push handle for
increased maneuverability.
Cart body and removable stainless
steel ledge panels are easily cleaned
and sanitized.
Base corner bumpers protect walls,
furnishings and doors.
Model 5500
Compartment floor drains facilitate
interior cleaning.
Model 5510
With optional top rail
Removable Ledge Panels
General Specications:
Unit shall be of Type 304 stainless steel welded and riveted construction to accommodate 14” x 18” (356 x 457 mm)
or 15” x 20” (381 x 508 mm) trays. Material thickness shall be of 16 gauge for top and oor/base, 20 gauge for sides
and back. Door shall be of 20 gauge insulated double-pan design, and shall be mounted to unit frame with two each
3” (76 mm) heavy-duty stainless steel hinges. Hinges shall be welded to door and unit frame. Door shall swing 270°
to provide full access to tray compartment, and shall be easily removable by lifting off of hinges. Door latch shall be
recessed paddle design. Tray ledges shall be 18 gauge stainless steel angle, welded to an 18 gauge stainless steel
frame panel at 6” (152 mm) spacing. Ledge panels shall accommodate both 14” x 18” or 15” x 20” trays, and shall be
removable for easy cleaning. Tray compartment shall have vents on end panels and shall have perforated center oor
drains. Unit base shall have 1¼” (32 mm) thick extruded PVC rounded bumpers mounted to corners. Unit shall have
four each extra-load plate type casters, two xed and two swivel, mounted to a 14 gauge stainless steel dolly on unit
base. Swivel casters shall have shielded ball bearing races and zerk lltings for lubrication of bearings. Caster wheels
shall be 6” (152 mm) diameter with 2” wide, non-marking, rounded cushion tread. Unit shall be NSF listed.
Model 5510 Specications:
Ledge clearance between compartment oor and bottom set of leges shall be 8¼”.
Model 5500 Specications:
Shall have welded 1” tubular push handle.
Compartment Floor Drain
AIA #Spec. #
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# RSTTE 1209 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
H-9
Room Service And Late Tray Trucks
Elite SeriesTM - Stainless Steel
Model 5500
Top View
Model 5510
Top View
Dimensions
Lake-Glide Ship
Tray Ledge Compartments/ Overall Size Casters Weight
Model Capacity Spacing Trays Per Ledge W D H Type Dia. Lbs (Kg)
5500 6 6” 1/1 32¼” 21¾” 45¾” 2 Fixed 6” 110 (50)
(152) (816 552 1162) 2 Swivel (152)
5510 12 6”* 1/2 32¼” 36¾” 48¾” 2 Fixed 6” 190 (86)
(152) (816 933 1238) 2 Swivel (152)
Measurements in ( ) denote metric millimeters, unless otherwise specied.
*Compartment oor to bottom ledge clearance is 8¼” (206).
Optional Accessories
AIA # Spec. #
• Custom ledge spacing
• Full perimeter bumper
• 2” high top rail (3 sides)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# RSTTE 1209 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
H-9
Loading...