Lakeside Foodservice 400925 Specifications
tem #
I
Quantity
Drop-in Self-Leveling Dispensers
Open, Shielded and Heated, ADA Height
Dispensing level is easily adjusted by
attaching or detaching springs. No
tools required.
Spec. # AIA #
Models available to fit plates from 5” to 12 1/4”.
Overall height allows for fit into ADA height-
Model 500925
Shielded
compliant counters.
All models have a 22” stacking capacity.
Easy-Glide™design provides quiet, non-stick
operation.
Heated dispensers feature thermostatic
control. Thermostat minimum 100°F (38°C) maximum 180°F (82°C).
odel 400925
M
Open
High-strength stainless steel uprights.
Specifications
Unit shall be of welded stainless steel construction. Dispensers shall hang from surface opening by an
18-gauge flange ring and feature three each 22-gauge vertical side supports welded to 20-gauge
bottom plate. Overall height from flange ring to base of 25” shall allow for fit into ADA height-compliant
counters.Self-leveling dish carriage shall be of welded stainless steel construction and shall travel
vertically in dispenser tube with nylon guides for smooth operation. Carriage shall have 22-gauge
removable dish platform. Unit shall feature flange mounted perimeter extension springs, which are
detachable from the dish carriage to provide adjustment without tools for different weight dishes. Unit
shall have a vertical stacking capacity of 22". Unit shall be NSF listed.
Heated Models Only: Unit shall be 120 VAC 60 Hz and shall have 5´ power supply cable with
L15-5P NEMA twist lock plug for 120 VAC. Dispenser tubes shall be fully enclosed in 22-gauge
stainless steel, and have a circular bottom mounted 300 or 450 watt heater element to provide
convection heat. Heating system shall feature thermostatic control in a tamper protective location with
safe high-end shut-off. Control shall have Infinite settings between low and high temperature cut-outs.
Thermostat shall be field adjustable for average interior air temperature between 100° F (38° C) and
175° F (79° C) at middle adjustable thermostatic setting. On-off switch and power indicator light shall
be mounted on top flange of dispenser. Average dish temperature rise of 40° F (22° C) above ambient
shall be achieved within one hour of initial heating cycle at middle adjustable thermostatic setting. Unit
shall be UL listed.
Optional Accessories
• Stainless steel dispenser tube covers
• 208/240 VAC 60Hz (heated models)
• 220 VAC 50 Hz (heated models)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 0108 DISLD25 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-125
Drop-in Self-Leveling Dispensers
Open, Shielded and Heated, ADA Height
B
A
utoCAD drawings available through KCL CADalog
A
Dimensions
Model Accommodates Plate Size
Height To Ring
(A)
Open Models
400025 Up to 5” Up to (127)
AIA #
400525 5-1/8” to 5-3/4” (130 to 146
400625 5-7/8” to 6-1/2” (149 to 165
400725 6-5/8” to 7-1/4” (168 to 184)
400825 7-3/8” to 8-1/8” (200 to 206)
400925 8-1/4” to 9-1/8” (210 to 232)
401025 9-1/4” to 10-1/8” (235 to 257)
401125 10-1/4” to 11” (260 to 279)
401225 11-1/4” to 12-1/4” (286 to 311)
25”
(635) 8-1/4” (210)
25”
(635) 9” (229)
25”
(635) 9-3/4” (248)
25”
(635) 10-1/2” (267)
25”
(635) 11-3/8” (289)
25”
(635) 12-3/8” (314)
25”
(635) 13-3/8” (340)
25”
(635) 14-1/4” (356)
25”
(635) 15-7/8” (403)
Shielded Models
500025 Up to 5” Up to (127)
500525 5-1/8” to 5-3/4” (130 to 146
500625 5-7/8” to 6-1/2” (149 to 165
500725 6-5/8” to 7-1/4” (168 to 184)
500825 7-3/8” to 8-1/8” (200 to 206)
500925 8-1/4” to 9-1/8” (210 to 232)
501025 9-1/4” to 10-1/8” (235 to 257)
Spec. #
501125 10-1/4” to 11” (260 to 279)
501225 11-1/4” to 12-1/4” (286 to 311)
25”
(635) 8-1/4” (210)
25”
(635) 9” (229)
25”
(635) 9-3/4” (248)
25”
(635) 10-1/2” (267)
25”
(635) 11-3/8” (289)
25”
(635) 12-3/8” (314)
25”
(635) 13-3/8” (340)
25”
(635) 14-1/4” (356)
25”
(635) 15-7/8” (403)
Heated Models
600025 Up to 5” Up to (127)
600525 5-1/8” to 5-3/4” (130 to 146
600625 5-7/8” to 6-1/2” (149 to 165
600725 6-5/8” to 7-1/4” (168 to 184)
600825 7-3/8” to 8-1/8” (200 to 206)
600925 8-1/4” to 9-1/8” (210 to 232)
601025 9-1/4” to 10-1/8” (235 to 257)
601125 10-1/4” to 11” (260 to 279)
601225 11-1/4” to 12-1/4” (286 to 311)
25”
(635) 8-1/4” (210)
25”
(635) 9” (229)
25”
(635) 9-3/4” (248)
25”
(635) 10-1/2” (267)
25”
(635) 11-3/8” (289)
25”
(635) 12-3/8” (314)
25”
(635) 13-3/8” (340)
25”
(635) 14-1/4” (356)
25”
(635) 15-7/8” (403)
Top Ring
Diameter (B)
Counter Cut-Out
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
Measurements in ( ) denote metric millimeters, unless otherwise specified.
(189) _ _ 10 (4.5)
(208) _ _ 11 (4.9)
(227) _ _ 12 (5.4)
(246) _ _ 12 (5.4)
(268) _ _ 12 (5.4)
(294) _ _ 15 (6.8)
(319) _ _ 16 (7.3)
(344) _ _ 17 (7.7)
(373) _ _ 18 (8.2)
(189) _ _ 15 (6.8)
(208) _ _ 16 (7.3)
(227) _ _ 17 (7.7)
(246) _ _ 18 (8.2)
(268) _ _ 20 (9.1)
(294) _ _ 23 (10.4)
(319) _ _ 24 (10.9)
(344) _ _ 26 (11.8)
(373) _ _ 29 (13.2)
(189) 300 2.5 18 (8.2)
(208) 300 2.5 19 (8.6)
(227) 300 2.5 20 (9.1)
(246) 300 2.5 21 (9.5)
(268) 300 2.5 23 (10.4)
(294) 450 3.8 26 (11.8)
(319) 450 3.8 28 (12.7)
(344) 450 3.8 30 (13.6)
(373) 450 3.8 32 (14.5)
Electrical
Watts Amps
lbs. (kg.)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 0108 DISLD25 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-125
Loading...