Lakeside Foodservice 4009 Specifications
tem #
I
Quantity
Drop-in Self-Leveling Dispensers
Open, Shielded and Heated
Dispensing level is easily adjusted by
attaching or detaching springs. No
tools required.
Models available to fit plates from 5” (127 mm)
•
to 12 1/4” (311 mm).
odel 4009
M
All models have a 26” (660) stacking capacity.
•
Easy-Glide™design provides quiet, non-stick
•
operation.
Heated dispensers feature thermostatic
•
control. Thermostat minimum 100°F (38°C) maximum 180°F (82°C).
Open
Spec. # AIA #
High-strength stainless steel frame.
•
Model 5009
Shielded
Specifications
Unit shall be of welded stainless steel construction. Dispensers shall hang from surface opening by
an 18-gauge flange ring and feature three each 22-gauge vertical side supports welded to 20-gauge
bottom plate. Self-leveling dish carriage shall be of welded stainless steel construction and shall
travel vertically in dispenser tube with nylon guides for smooth operation. Carriage shall have
22-gauge removable dish platform. Unit shall feature flange mounted perimeter extension springs,
which are detachable from the dish carriage to provide adjustment without tools for different weight
dishes. Unit shall have a vertical stacking capacity of 25" (635 mm). Unit shall be NSF listed.
Heated Models Only: Unit shall be 120 VAC 60 Hz and shall have 5´ (1524 mm) power supply cable
with L15-5P NEMA twist lock plug for 120 VAC. Dispenser tubes shall be fully enclosed in 22-gauge
stainless steel, and have a circular bottom mounted 300 or 450 watt heater element to provide convection heat. Heating system shall feature thermostatic control in a tamper protective location with
safe high-end shut-off. Control shall have Infinite settings between low and high temperature cutouts. Thermostat shall be field adjustable for average interior air temperature between 100° F (38°
C) and 175° F (79° C) at middle adjustable thermostatic setting. On-off switch and power indicator
light shall be mounted on top flange of dispenser. Average dish temperature rise of 40° F (22° C)
above ambient shall be achieved within one hour of initial heating cycle at middle adjustable
thermostatic setting. Unit shall be UL listed.
Optional Accessories
• Stainless steel dispenser tube covers
• 208/240 VAC 60Hz (heated models)
• 220 VAC 50 Hz (heated models)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 0610 DISLD Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-1
Drop-in Self-Leveling Dispensers
Open, Shielded and Heated
B
A
AutoCAD drawings available through KCL CADalog
Dimensions
Model Accommodates Plate Size
Height To Ring
(A)
Open Models
4000 Up to 5” Up to (127)
4005 5-1/8” to 5-3/4” (130 to 146
AIA #
4006 5-7/8” to 6-1/2” (149 to 165
4007 6-5/8” to 7-1/4” (168 to 184)
4008 7-3/8” to 8-1/8” (200 to 206)
4009 8-1/4” to 9-1/8” (210 to 232)
4010 9-1/4” to 10-1/8” (235 to 257)
4011 10-1/4” to 11” (260 to 279)
4012 11-1/4” to 12-1/4” (260 to 311)
27¾”
27¾”
27¾”
27¾”
27¾”
27¾”
27¾”
27¾”
27¾”
(705) 8-1/4” (210)
(705) 9” (229)
(705) 9-3/4” (248)
(705) 10-1/2” (267)
(705) 11-3/8” (289)
(705) 12-3/8” (314)
(705) 13-3/8” (340)
(705) 14-1/4” (356)
(705) 15-7/8” (403)
Shielded Models
5000 Up to 5” Up to (127)
5005 5-1/8” to 5-3/4” (130 to 146
5006 5-7/8” to 6-1/2” (149 to 165
5007 6-5/8” to 7-1/4” (168 to 184)
5008 7-3/8” to 8-1/8” (200 to 206)
5009 8-1/4” to 9-1/8” (210 to 232)
5010 9-1/4” to 10-1/8” (235 to 257)
5011 10-1/4” to 11” (260 to 279)
Spec. #
5012 10-1/4” to 12-1/4” (260 to 311)
28”
(711) 8-1/4” (210)
28”
(711) 9” (229)
28”
(711) 9-3/4” (248)
28”
(711) 10-1/2” (267)
28”
(711) 11-3/8” (289)
28”
(711) 12-3/8” (314)
28”
(711) 13-3/8” (340)
28”
(711) 14-1/4” (356)
28”
(711) 15-7/8” (403)
Heated Models
6000 Up to 5” Up to (127)
6005 5-1/8” to 5-3/4” (130 to 146
6006 5-7/8” to 6-1/2” (149 to 165
6007 6-5/8” to 7-1/4” (168 to 184)
6008 7-3/8” to 8-1/8” (200 to 206)
6009 8-1/4” to 9-1/8” (210 to 232)
6010 9-1/4” to 10-1/8” (235 to 257)
6011 10-1/4” to 11” (260 to 279)
6012 10-1/4” to 12-1/4” (260 to 311)
28”
(711) 8-1/4” (210)
28”
(711) 9” (229)
28”
(711) 9-3/4” (248)
28”
(711) 10-1/2” (267)
28”
(711) 11-3/8” (289)
28”
(711) 12-3/8” (314)
28”
(711) 13-3/8” (340)
28”
(711) 14-1/4” (356)
28”
(711) 15-7/8” (403)
Top Ring
Diameter (B)
Counter Cut-Out
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
7-7/16”
8-3/16”
8-15/16”
9-11/16”
10-9/16”
11-9/16”
12-9/16”
13-9/16”
14-11/16”
Measurements in ( ) denote metric millimeters, unless otherwise specified.
(189) _ _ 10 (4.5)
(208) _ _ 11 (4.9)
(227) _ _ 12 (5.4)
(246) _ _ 12 (5.4)
(268) _ _ 12 (5.4)
(294) _ _ 15 (6.8)
(319) _ _ 16 (7.3)
(344) _ _ 17 (7.7)
(373) _ _ 18 (8.2)
(189) _ _ 15 (6.8)
(208) _ _ 16 (7.3)
(227) _ _ 17 (7.7)
(246) _ _ 18 (8.2)
(268) _ _ 20 (9.1)
(294) _ _ 23 (10.4)
(319) _ _ 24 (10.9)
(344) _ _ 26 (11.8)
(373) _ _ 29 (13.2)
(189) 300 2.5 18 (8.2)
(208) 300 2.5 19 (8.6)
(227) 300 2.5 20 (9.1)
(246) 300 2.5 21 (9.5)
(268) 300 2.5 23 (10.4)
(294) 450 3.8 26 (11.8)
(319) 450 3.8 28 (12.7)
(344) 450 3.8 30 (13.6)
(373) 450 3.8 32 (14.5)
Electrical
Watts Amps
lbs. (kg.)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 0610 DISLD Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-1
Loading...