Lakeside Foodservice 16549, 6552 Specifications
Heated Cabinets With Universal Ledges
Insulated and Non-insulated Stainless Steel
Item # _____________
Quantity ___________
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-6
Lit# HCABUA 1205 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
General Specifications
Shall be of stainless steel construction, to hold 20" x 22" (510 x 560 mm), 18" x 26" (457 x 660 mm) and
14" x 18" (356 x 457 mm) pans and trays. Welded tubular base frame shall be 1" square, heavy gauge
stainless steel tubing, with 10-gauge stainless steel reinforcing plates at corners. Insulated Models: High
density fiberglass insulation throughout; top, back, bottom, sides, and door(s). Non-insulated Models: High
density fiberglass insulated door. Door shall be attached to cabinet with heavy-duty lift-off hinges, which
provide for 270° swing and be held open by magnetic door latch. Each door has paddle latch. Cabinet has
recessed handles. Bottom corner bumpers shall be standard. Polyurethane tire casters in a configuration of
two (2) rigid, and two (2) swivel with brake. Casters shall have a reinforced yoke welded to 10-gauge caster
mounting plate. The caster mounting plate shall be secured to a 10-gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs. The reinforcing stress plates shall be welded to the heavy
gauge tubular frame of the unit. Unit shall have removable heating unit (120 VAC, 15.4 amp, 1850 watts,
5-20P NEMA plug) with control for heat setting. Control shall be easily accessed from the front without
opening the door. Heating unit shall also feature a water reservoir.
All purpose heated holding for
cooked foods.
•
Durable welded stainless steel construction.
•
Heavy-duty blower distributes hot air evenly
throughout the cabinet.
•
Heat controls are conveniently located on
the outside of the cabinet.
•
Full-pan top and bottom design provide
added durability during offsite transport.
•
Accommodates 20" x 22", 18" x 26" and
14" x 18" trays/pans.
•
Single door and double dutch door
versions are available.
•
Can be used with or without humidity.
•
Heating unit is removable for easy cleaning.
•
NSF and UL listed.
Spec. # ____________________________________ AIA# ____________________________________
Model 16549
Adjustable Tray Ledges
C
U
L
®
NSF
®
Heated Cabinets With Universal Ledges
Insulated and Non-insulated Stainless Steel
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-6
Lit# HCABUA 1205 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
Insulated Models
Pan Capacity Ledge Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg)
16547 4 8 4.5'' Single 28'' 34'' 33'' 190 (86)
(114) (711 864 838)
16548 6 12 4.5'' Single 28'' 34'' 42'' 250 (114)
(114) (711 864 1067)
16549 10 20 4.5'' Single 28'' 34'' 60'' 280 (127)
(114) (711 864 1524)
16552 12 24 4.5'' Single 28'' 34'' 69'' 310 (141)
(114) (711 864 1753)
Non-insulated Models
Options
• Full Perimeter Bumper
• All Swivel Lake Glide Casters
• Floor Lock Centered (6” Casters)
• Additional Tray Slides
• Transport Latch
• Magnetic Latch
• Dutch Doors (Models 16552 and 6552)
• Clear Polycarbonate Door
• Vented Doors (single door only)
• Left-Hand Door Hinging
• Voltage 220 Volt, 50/60 Hz, Single Phase
• Transport Package
AIA# ____________________________________ Spec.# ___________________________________
Universal Slides Accommodate
The Following Per Slide:
1 ea. 18'' x 26'' Pan
1 ea. 15'' x 20'' Tray
1 ea. 16'' x 22'' Tray
1 ea. 20'' x 22'' Pan
2 ea. 14'' x 18'' Pan
2 ea. 13'' x 18'' Pan
2 ea. 12'' x 20'' Pan (3'' Deep)
Measurements in ( ) denote metric millimeters, unless otherwise specified.
16547 16548 16549 16552 16552 Side View
6547 6548 6549 6552 6552 Side View
Pan Capacity Ledge Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg)
6547 4 8 4.5'' Single 27.75'' 34'' 33'' 150 (68)
(114) (705 864 838)
6548 6 12 4.5'' Single 27.75'' 34'' 42'' 190 (86)
(114) (705 864 1067)
6549 10 20 4.5'' Single 27.75'' 34'' 60'' 250 (114)
(114) (705 864 1524)
6552 12 24 4.5'' Single 27.75'' 34'' 69'' 270 (128)
(114) (705 864 1753)
Dimensions
Top View