Lakeside Foodservice 16508 Specifications
Heated Cabinets for Sheet Pans
Insulated and Non-insulated Stainless Steel
Item # _____________
Quantity ___________
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-7
Lit# HCAB 1205 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
General Specifications
Shall be of stainless steel construction, to hold 18" x 26" (457 x 660 mm) pans and trays. Welded tubular
base frame shall be 1" square, heavy gauge stainless steel tubing, with 10-gauge stainless steel
reinforcing plates at corners. Insulated Models: High density fiberglass insulation throughout; top, back,
bottom, sides, and door(s). Non-insulated Models: High density fiberglass insulated door. Door shall be
attached to cabinet with heavy-duty lift-off hinges, which provide for 270° swing and be held open by
magnetic door latch. Each door has paddle latch. Cabinet has recessed handles. Bottom corner bumpers
shall be standard. Polyurethane tire casters in a configuration of two (2) rigid, and two (2) swivel with brake.
Casters shall have a reinforced yoke welded to 10-gauge caster mounting plate. The caster
mounting plate shall be secured to a 10-gauge stainless steel reinforcing stress plate via welded in place
stainless steel studs. The reinforcing stress plates shall be welded to the heavy gauge tubular frame of the
unit. Unit shall have removable heating unit (120 VAC, 15.4 amp, 1850 watts, 5-20P NEMA plug) with
control for heat setting. Control shall be easily accessed from the front without opening the door. Heating
unit shall also feature a water reservoir.
All purpose heated holding for
cooked foods.
•
Durable welded stainless steel construction.
•
Heavy-duty blower distributes hot air evenly
throughout the cabinet.
•
Heat controls are conveniently located on
the outside of the cabinet.
•
Full-pan top and bottom design provide
added durability during offsite transport.
•
Accommodates 18" x 26" trays/pans.
•
Single door and double dutch door
versions are available.
•
Can be used with or without humidity.
•
Heating unit is removable for easy cleaning.
•
NSF and UL listed.
Spec. # ____________________________________ AIA# ____________________________________
Model 16508
C
U
L
®
NSF
®
Sheet Pan Tray Slides
Heated Cabinets for Sheet Pans
Insulated and Non-insulated Stainless Steel
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
MC-7
Lit# HCAB 1205 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
Insulated Models
Pan Capacity Slide Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg)
16505 5 10 3
"
Single 25.5"34.75"33"180 (82)
(76) (648 883 838)
16507 9 18 3
"
Single 25.5"34.75"44.5"240 (109)
(76) (648 883 1130)
16508 14 28 3
"
Single 25.5"34.75"59.5"280 (127)
(76) (648 883 1511)
16509 17 34 3
"
Single 25.5"34.75"68.5"300 (136)
(76) (648 883 1740)
Non-insulated Models
Options
• Full Perimeter Bumper
• All Swivel Lake Glide Casters
• Floor Lock Centered (6” Casters)
• Additional Tray Slides
• Transport Latch
• Magnetic Latch
• Dutch Doors (Models 16509 and 6509)
• Clear Polycarbonate Door
• Vented Doors (single door only)
• Left-Hand Door Hinging
• Voltage 220 Volt, 50/60 Hz, Single Phase
• Transport Package
AIA# ____________________________________ Spec.# ___________________________________
Measurements in ( ) denote metric millimeters, unless otherwise specified.
16505 16507 16508 16509 16509 Side View
6505 6507 6508 6509 6509 Side View
Pan Capacity Slide Door Overall Size Case Weight
Models Full Size Half Size Spacing Type W D H Lbs. (kg)
6505 5 10 3
"
Single 25.375"33.75"31.5"150 (68)
(76) (644 857 800)
6507 9 18 3
"
Single 25.375"33.75"45"190 (86)
(76) (644 857 1143)
6508 14 28 3
"
Single 25.375"33.75"60"230 (105)
(76) (644 857 1524)
6509 17 34 3
"
Single 25.375"33.75"69"270 (123)
(76) (644 857 1753)
Dimensions
Top View
Loading...