Lakeland 24031, 24210 User Manual

USER MANUAL

LAKELAND ELECTRONIC STEAM MOP

MODEL 24031
Helpline No: 015394 88100

MODEL 24210
Helpline No: 0800 444 1500

2

3

Thank you for choosing the Lakeland Electronic Steam Mop.

The steam mop generates steam at a push of a button and uses the triple layered, steam activated
microfibre pads to loosen and lift dirt.

Its quick heat up time allows the mop to produce super-heated steam within 30 seconds. The steam
sanitises floors, killing harmful germs without the need for harmful chemicals. The 7m flex allows
easy use around the home with the back saver function on the handle allowing easy reach under
furniture.

To get the best from your new steam mop, please take a few moments to read these instructions,
and keep them in a safe place for future reference.

An award winning family-owned business, here at Lakeland we still have the same values of
excellent quality, value for money and exceptional customer care as we did when we first set up the
company in the 1960s.

Our products are carefully selected and rigorously tested to meet our high standards, so you can be
assured that any product you purchase will be easy-to-use and highly durable.

CONTENTS

Parts ...................................................................................................................................................4

Important safety instructions .............................................................................................................5

Getting started ................................................................................................................................... 6

Using your Steam Mop ....................................................................................................................... 7

Troubleshooting ................................................................................................................................. 8

Electrical connections ......................................................................................................................... 9

4

Parts

a Back saver handle
b Lower pole
c Steam mop base
d Carpet glider accessory
e Jug
f Microfibre pads

Technical specifications

Voltage: 220 – 240V
Power: 1550 Watts
Water Capacity: 350ml
Helpline: 015394 88100

a

b

c

d

e

f

5

Important safety instructions

When using the Lakeland Electronic Steam Mop, please follow these basic safety precautions.

Please use caution when using the steam mop. The steam emitted from the openings is very hot.

1. Use the system only for its intended use.

2. Do not use outdoors.

3. Do not leave the appliance unattended when plugged in. Always unplug the power cord from
the electrical outlet when not in use and before servicing.

4. The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety. Do not allow the appliance to be used as a toy.

5. Use only manufacturer’s recommended accessories.

6. Do not operate the appliance with a damaged plug or cord, or if the unit has been dropped or
damaged. Never attempt to repair or replace the cord yourself as this may lead to severe injury or
electric shock. Call the helpline on 015394 88100 to arrange a replacement.

7. Do not immerse the steam mop into water or any other liquids.

8. Do not handle the plug or steam mop with wet hands or operate appliance without any shoes.

9. Do not pull or carry by power cord, use power cord as a handle, close a door on the power cord,
or pull the power cord around sharp edges or corners. Keep the power cord away from heated
surfaces.

10. Do not unplug by pulling on the power cord. To unplug, grasp the plug not the power cord.

Do not use extension cords or outlets with inadequate current carrying capacity.

11. Do not put any objects into openings. Do not use with any opening blocked.

12. Do not put hands or feet under the steam mop, the unit gets very hot.

13. Use only on flat, horizontal surfaces. Do not use on walls, counters or windows.

14. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated
with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is
always recommended to test an isolated area of the surface to be cleaned before proceeding.

We also recommend that you check the use and care instructions from the floor manufacturer.

15. Do not use on leather, waxed polished furniture, synthetic fabrics, velvet or other delicate, steam
sensitive materials.

16. Do not add cleaning solutions, scented perfumes, oils or any other chemicals to the water used
in this appliance as this may damage the unit or make it unsafe for use. If you live in a hard water
area, we recommend using distilled water in your steam mop.

17. When in use, never turn the appliance over or on its side. Never direct steam towards people,

animals or plants.

18. Never leave the steam mop in one spot on any surface for any period of time when
microfibre pad is attached.

19. Once you have finished using the steam mop turn the unit off, unplug and carefully remove
the microfibre pad immediately. Do not store the unit with damp, wet microfibre cleaning pad
attached.

20. When cleaning the steam mop, unplug the power cord from the electrical outlet and clean with a
dry or damp cloth. Do not pour water or use alcohol, benzene or paint thinner on the unit.

21. Extreme caution should be exercised when using this appliance to clean stairs.

22. Do not use steam mop without microfibre pad attached.

23. Store the steam mop indoors in a cool, dry place.

24. To avoid a circuit overload, do not operate another appliance on the same socket (circuit) as the
steam cleaner.

25. If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14
gauge cord should be used. Cords rated for less amperage may overheat. Extension cords over 5
metres in length should not be used. Care should be taken to arrange cord so that it cannot be
pulled or tripped over.

6

Getting Started

Assembly

1. Carefully unpack all the parts and remove any packaging. Do not plug in the mop until it is

fully assembled and you have read all of the following instructions.

2. Fig 1: Slide the back saver handle (a) into the lower pole. Push the two tubes together until

you hear them click into place.

3. Fig 2: Insert the assembled pieces into the steam mop base. Push together until you hear it

click into place. Insert the cord into the cord clip on the shaft of the steam mop.

4. Fig 3: Place one microfibre pad underneath the mop head, with the quick fastener strips

facing up. Simply press the steam mop to the pad.

Filling the water tank

Please be aware that the first time you use the Lakeland Electronic Steam Mop you may find water
droplets in the water tank. This is due to testing of the unit at the factory.

1. Make sure your steam mop is unplugged from the wall before you fill the water tank.

2. Fig 4: Remove the water tank cap by turning anti-clockwise to the unlocked position.

3. Use the jug to aid you in filling the water tank. The water tank must not be filled above the

max fill line.

4. Replace the water tank cap by turning clockwise back to the locked position.

Fig 1. Fig 2.

Fig 4.

Fig 3.

a

b