Lakeland 23358, 24071 User Manual

DRY:SOON TOWEL WARMER

USER MANUAL

D UK

Modell: 24071 Model: 23358

Helpline No: 015394 88100

INTRODUCTION

Thank you for choosing the Lakeland Dry:Soon Towel Warmer. With its quick heat up time,
your towels will be warm and dry ready for the next use.

To get the best from your Lakeland Dry:Soon Towel Warmer, please take a few moments to
read these instructions, and keep them in a safe place for future reference.

SAFETY PRECAUTIONS

When using this Towel Warmer, please follow these basic safety precautions.

1. Please read all instructions before using.

2. Make sure your electricity supply matches the voltage shown on the appliance.

3. The Towel Warmer is for household use only. It is not suitable for commercial use, or for use
outdoors. It must only be used for its intended purpose.

4. To protect against electric shock, do not immerse the appliance, power cord or plug in water or
any other liquid.

5. The appliance must be placed on a level, dry surface at least 1.5 metres away from heat or water
sources.

6. Never pull or carry the Towel Warmer by its power cord. Do not allow the power cord to touch
hot surfaces or sharp edges. Do not let it trail over the edges where it may be pulled by children
or tripped over.

7. Always switch off and unplug the Towel Warmer after use, leaving it to cool down completely
before storing it away. Do not wind the power cord around the Towel Warmer.

8. The appliance is not intended for use by children or infirm people unless they have been
adequately supervised by a responsible person to ensure they can use it safely. Children should
be supervised to ensure they do not play with the appliance.

9. Please do not use the appliance if it has been dropped or damaged in any way. Check the power
cord regularly for signs of damage. Never attempt to repair the appliance or replace the cord
yourself as this may lead to severe injury or electric shock. Call the helpline on 015394 88100 to
arrange a replacement.

ON/OFF Switch

Screws for feet

Parts

1 x heated piece
2 x feet

TECHNICAL SPECIFICATIONS

Power consumption: 90W
Operating voltage: 230V
Maximum load 6kg

a

a
b

b

USING YOUR DRY:SOON TOWEL WARMER FOR THE FIRST TIME

Carefully unpack the Towel Warmer and remove any packaging.

ASSEMBLY OF TOWEL WARMER

Slide the feet (part b) onto the bottom of the heated piece (part a), tightening the screws already
present, to secure the feet in place. Place the unit on a level, dry surface ready for use.

INSTRUCTIONS FOR USE:

1. Plug the airer in and switch on using the on/off switch. The position of the switch is shown in

the diagram opposite.

CAUTION: Items should be placed on the horizontal heated rails only.

2. When you have finished using the airer, switch off and unplug from the power source.

TROUBLESHOOTING

Problem – the Towel Warmer is not heating up.
Solution – check the Towel Warmer is plugged in and the on/off switch is illuminated.

a

b