Laird FHQ69273CD Assembly And Installation Instructions Manual

FHQ69273CD

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

Patent Pending

Please read all instructions carefully before attempting

to install this product.

SAFETY

The antennas and all associated equipment should be installed in
accordance with all applicable local and naonal electrical code
guidelines to ensure safe operaon.

165-00299_AC

APPLICATION

LOCATION

The FHQ69273CD antenna provides an excellent solution for
transportation application with an integration of wide range of
frequencies in within one aerodynamic housing. This antenna
covers GPS, Internal or External LTE/EVDO, Internal or External
UHF and WLAN antennas.

The antenna should be mounted on the desired locaon before
connecng the cable. This is to ensure that the cable is not twisted
or damage during the mounng of the antenna.

MODEL Phantom Fin 4‐Ports LTE/WIFI/

UHF‐1/GPS (FHQ69273CD)

698-960MHz; 1710-2700MHz (LTE/EDVO)
2400-2500MHz; 4900-5875MHz (WIFI)
380-430MHz; (UHF-1 External Antenna)

Frequency

Gain

LTE/EDVO

3.5dBi (typical), 4.0dBi (max) @ 698-806MHz

3.1dBi (typical), 3.4dBi (max) @ 824-894MHz

3.3dBi (typical), 3.4dBi (max) @ 880-960 MHz

5.7dBi (typical), 6.1dBi (max) @ 1710-1880MHz

6.0dBi (typical), 6.3dBi (max) @ 1850-1990MHz

5.4dBi (typical), 6.3dBi (max) @ 1910-2170MHz

4.8dBi (typical), 5.1dBi (max) @ 2300-2500MHz

5.9dBi (typical), 6.4dBi (max) @ 2500-2700MHz

WIFI

6.6dBi (typical), 7.1dBi (max) @2400-2500MHz

6.2dBi (typical), 7.8dBi (max) @ 4900-5875MHz

UHF-1 (External Antenna)

2.0dBi (typical), 2.6dBi (max) @ 380-430MHz

VSWR

2.0:1 Across the bands

Port-to-Port Isolation

>15dB (UHF-LTE ports);
>20dB (UHF-WIFI ports);
>20dB (LTE-WIFI ports);

Nominal Impedance

Polarizaon

Azimuth Beam Width

Max Gain ±30
above Horizon 5GHz

4.1 dBi

Power Input (Max)

Operang Temperature

Storage Temperature

Cable

Dimensions HxLxW

Weight

Radome

Base Plate Material

Mount Style

RoHS

GPS ANTENNA

Frequency

Amplier Gain

Nominal Impedance

Output VSWR

DC Current

DC Voltage

Noise Figure

Cable

50Ω

Linear

Omnidireconal

10 Was (ambient temp of 25°C/77°F)

-30°C to +70°C

-40°C to +85°C

Coax Cable LMR-100

98.0mm x 70.0mm x 160.0mm

0.52kg

PC/ASA (Black)

Aluminum

Vehicle Mounted

Compliant

1575.42MHz (GPS L1)

27dB ± 3 dBc

50Ω

1.5:1 typical

20mA Nominal;< 30mA @

-40°C to +85°C

2.7-12 Vdc

4 dB max

Coax Cable RG174

Ingress Rating

IP67

INSTALLATION

- Maximum mounng plate thickness is 3 mm.

- The mounng area should be clean of any debris, clear from
obstrucons, and as at as possible

- Punch or drill a hole 21 mm in the roof of the vehicle at the
locaon idened.

- Place the antenna base onto the mounng plate. The
recommended orientation is facing the front of the vehicle.
Feed the cables from the bottom of the antenna through the
top side of the 21 mm hole. Peel the adhesive covering on
the bottom side of the antenna’s gasket. Place the threads of
the base plate of the antenna through the hole so the gasket
of the antenna is flat on the mounting plate. Slide the
lock-nut and washer around the 4 cables and finger-tighten to
the stud of the antenna. Orient the antenna in the desired
direction, and tighten the nut with a crescent wrench using 30
N*m of torque.

- Remove the cap and assemble the external Antenna on the
antenna base and manually ghten. Use a short service loop
(slack) with e-downs to secure the antenna cables such that
any force or movement will not be transmied to the antenna
connectors or the apparatus. Minimum bending radius for
the cable exing the boom of the antenna is 10 mm.

Americas: +1.847 839.6925

[e-mail]

Europe: +44.1628.858941

[e-mail]

Asia:
[e-mail]

Middle East and Africa: +44.1628.858941

[e-mail]

www.lairdtech.com

FHQ69273CD

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

165-00299_AC