Lainox RC15-7A User Manual

MODEL RC15-7A

CHILLER/FREEZER

Chiller for Cooked Dishes and Pastries / Combined Blast Freezer

STANDARD FEATURES

• 304 stainless steel inside casing

• 304 stainless steel top, sides and doors

• Right hinged door with automatic return pivot and 90° fixed
position (field reversible door)

• Stainless steel feet adjustable to 7-1/8"

• Stainless steel front framework with anti-condensing system

• Injected polyurethane foam insulation, 2-3/8" thick, 0% CFC

• Run-off plug and bottom of chiller are angled to evacuate water

• Coved internal corners with 1/2" radius

• Tool-free removal of internal accessories

• 1-1/4" wide magnetic door seals with anti-dirt, anti-impact
rounded profile, and tool-free removal

• Smooth, sealed control panel

• Easy maintenance

CAPACITY

• 3 adjustable levels to accomodate 12" x 20" hotel pans or
a maximum of 7 levels (levels at 1-1/2" increments)

• Blast chilling capacity: 33 lbs. from 145°F to 50°F, “to core”,
within 1 hr. 50 mins.

• Blast freezing capacity: 16 lbs. from 145°F to -0.4°F, “to core”,
within 4 hrs. 30 mins.

MULTI-POINT FRIGIPROBE

• A stainless steel probe with four temperature sensors monitors core
temperature of product

• Frigiprobe electronically assists blast chilling and freezing of
products accurately regardless of quantity, weight, or thickness

• Blast freezing or chilling is automatically stopped once “core”
temperature is reached (-0.4°F to +40°F)

• Blast chilling mode can limit air temperature at the surface to
32°F to prevent surface icing

ELECTRONIC CONTROL

• Blast chilling or freezing controlled with Timer Mode or Frigiprobe Mode

• Timer Mode remembers last time settings

• Temperature maintained after blast chilling or freezing

• Automatic control of de-icing cycle

• Audible signal at start and end of cycle with remote report feature

• Remote alarm signal (output 12 Vdc)

• Temporary self-repair of probes and quick diagnosis of anomalies

• Temperature display in °F or °C

Control panel display

• Alternating digital display of core temperature and cycle time elapsed
(Frigiprobe Mode)

• Alternating digital display of internal temperature and cycle time
remaining (Timer Mode)

• Lights indicating functions in progress

Communication board

• Serial type RS 232 C port and parallel port, enabling unit to be
connected to a PC, a data processing network or a printer

OPTIONS & ACCESSORIES

 Pair of U type runners
 Audible alarm
 Remote printer (records temperatures and cycle times)
 Wall mounting of printer
 6 rolls of printer paper
 Stainless steel casters, with braking mechanism
 Left hinged door

(3M) 12/03 Printed in U.S.A.

INV NO.

Project
Item No.
Quantity

REFRIGERATION

• Air-cooled condensing unit

• 1 hp hermetic compressor

• R404A refrigerant

• Drier and liquid indicator

• One evaporator with thermostatic expansion valve fitted
with a M.O.P.-4°F

•7-7/8" diameter fan, mounted on a pivoting stainless
steel panel for easy maintenance

• Defrosting with forced operation of fan

REQUIREMENTS

General

• Wall Clearance
– Top: 15- 3/4"
– Sides: 4"

• Ventilation of premises if temperature is higher than 100°F,
taking into account the unit’s heat emission

• Keep away from sources of heat

Electrical

• Electrical power supply must conform to regulation

• Unit supplied with 6' 7" cable with plug

• Voltage: 208-240 V / 60 / 1, with ground

• Installed power: 7,800 BTU/hr.

• Amp: 4.3 A

• Breaker: 20 A

Draining

• No drain - electrical condensate evaporator pan

Due to an ongoing value analysis program at Friginox, specifications contained in this catalog are subject to change without notice.

RC15-7A

FRIGINOX

PO Box 4129 Winston-Salem, NC 27105
800/551-8795 • Ph: 336/661-0257 • Fax: [phone]
[e-mail] www.friginox.com

APPROVALS

Net weight: 254 lbs.

30- 3/8"

Front View Side View Top View

4-3/4"

(A)

31-1/8"

4" Min.

21"

13 "

37- 5/8"

7-1/2 "

6"

2- 3/8"

17-1/2"

59"