USER’S MANUAL
COMBINATION OVEN WITH DIRECT STEAM AND WITH STEAM GENERATOR
C O M PA C T
V E R S I O N S
EN
Technical service
90026410rev01
MODELS
CEV ....
CME .... / CVE .... / CVG ....
CAPACITY
4 x GN 2/3 |
(024) |
6 x GN 2/3 |
(026) |
6 x GN 1/1 |
(061) |
10 x GN 1/1 |
(101) |
|
|
CONTENTS
|
|
PAGE |
1 |
• GENERAL REMINDERS |
4 |
2 |
• POINTS TO REMEMBER |
5 |
3 |
• DESCRIPTION OF KEYS |
6 |
4 |
• MANUAL SETTINGS FOR ONE-PHASE COOKING |
8 |
5 |
• SETTING THE OVEN MANUALLY FOR COOKING WITH TWO OR MORE CYCLES IN SEQUENCE |
10 |
6 |
• ENTERING AND SAVING A PROGRAM |
12 |
7 |
• SELECTING AND STARTING A SAVED PROGRAM |
13 |
8 |
• DELETING A SAVED PROGRAM |
14 |
9 |
• TEMPORARILY ALTERING A SAVED PROGRAM |
14 |
10 |
• SELECTING AND STARTING A PRE-STORED RECIPE |
15 |
11 |
• TEMPORARILY CHANGING A STORED RECIPE |
16 |
12 |
• SETTING THE CORE PROBE |
17 |
13 |
• AUTOMATIC HUMIDITY CONTROL SYSTEM |
19 |
14 |
• PARTICULAR PROGRAMS |
20 |
15 |
• OPERATING DETAILS |
23 |
16 |
• USEFUL TIPS |
24 |
17 |
• ROUTINE MAINTENANCE |
25 |
18 |
• NON-ROUTINE MAINTENANCE |
25 |
19 |
• SETTING THE DATE AND TIME |
26 |
20 |
• DOWNLOAD HACCP LOG |
27 |
21 |
• IMPORT/EXPORT RECIPES |
28 |
|
• SPECIAL PROGRAMS |
29 |
22 |
• SPECIAL PROGRAMS - CALOUT |
30 |
23 |
• SPECIAL PROGRAMS - MC CAL - HC CAL |
31 |
|
• SPECIAL PROGRAMS - MANUAL AND AUTOMATIC CLEANING |
32 |
24 |
• SPECIAL PROGRAMS - MANUAL CLEANING |
33 |
25 |
• SPECIAL PROGRAMS - WASHING KIT |
34 |
26 |
• DESCALING THE BOILER |
36 |
27 |
• SELF-DIAGNOSIS AND FAULT IDENTIFICATION |
38 |
28 |
• PRE-STORED RECIPES |
42 |
VERSIONS
S - Manual electronic controls - Programmable with 99 programs, with automatic 4-cycle sequence - Dedicated key for managing 4 cycles, with displaying LED - Alphanumerical displays - Over 90 tested and memorized recipes (Version S with core probe) - Direct access key to programs and recipes - AUTOCLIMA with automatic vent - Fast-Dry: Rapid humidity evacuation system - Self-diagnosis - Autoreverse (automatic inversion of direction of fan rotation) - Standard semi-automatic washing program - USB interface for software update, cooking programs and HACCP data download - Controls for: humidifier, quick cavity cooling with door open, cavity lights, manual vent control (Fast-Dry system).
OPTIONAL: - Core probe - 2 speed fan - Hand shower - Automatic washing system
The manufacturer accepts no liability for any inaccuracies in this manual attributable to printing or copying errors. We reserve the right to modify our products as we deem fit, without impairing their basic features.
The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in writing by the manufacturer.
- ORIGINAL INSTRUCTIONS -
3
90026410rev01
1 • GENERAL REMINDERS
Repairs may become necessary over time; these and all major servicing operations must be performed exclusively by technicians employed by the manufacturer or an authorized service centre.
1.1• Carefully read the directions given in this manual; they contain important information on safety during installation, operation and maintenance.
Keep this manual in a safe place for future consultation!
1.2• This appliance must only be used as specified in the design: i.e. cooking foods. Any other type of use is improper and therefore dangerous.
1.3• Only suitably trained kitchen personnel should be allowed to use the appliance.
1.4• The oven must not be left unattended during operation.
1.5• There are surfaces of the oven that become hot during operation. Take care!
1.6• Ask the installer for information on correct operation and use of the water softener; incorrect or incomplete maintenance is at the origin of the formation of scale, which would badly damage the oven.
1.7• Should it become necessary to call out a service technician, all essential identification details of the appliance are shown on the data plate, located at the right-hand side on the bottom.
1.8• Each appliance is equipped with a data plate identifying the model and its main specifications. An example is given below of a dataplate for an electric oven and one for a gas oven.
LOGO
TYP. XXXXXXXX
2010 NR XXXXXXXXXX
3N AC 400V 50Hz
1 x 0.25 kW |
TOT 6.25 kW |
kPa |
|
|
|
||||
200 - 500 |
|
|
||
|
|
|
|
|
|
|
|
|
|
IPX 5
LOGO
TYP. XXXXXXXX |
|
|
|
|
|
||||
2010 |
|
NR XXXXXXXXXX |
|
|
|||||
EN 203/A1 |
|
|
|
AC 230V 50Hz |
|
|
|||
1 x 0.55 kW |
|
TOT |
1 |
kW |
Qn |
40 kW |
|||
A3 |
|
B13 |
|
B23 |
kPa |
|
|
||
|
|
|
|
||||||
G 25 |
/ |
m3/h |
|
G 20 |
/ |
m3/h |
200 - 500 |
|
|
Pmax |
/ |
mbar |
|
Pmax |
/ |
mbar |
G 30 |
3.16 Kg/h |
|
Pmin |
/ |
mbar |
|
Pmin |
/ |
mbar |
Pmin |
/ mbar |
|
|
IT |
|
|
Cat. |
P mbar |
||||
|
|
II 2H3+ |
20; 28-30/37 |
|
IPX 5 |
0085 |
|
1.9• In the event of technical assistance being required, provide as much detailed information about the fault as possible in order to facilitate the service technician in identifying and resolving the malfunction.
1.10• In the event of breakdown or faulty operation, switch off the oven immediately!
1.11• The room in which the oven is to operate must be well ventilated!
1.12• Safety sticker
•Maximum height for inserting containers with liquids.
•ATTENTION to avoid scalding, do not use the containers filled with liquid or food which, through cooking become fluid, at levels higher than those which can be observed.
<![if ! IE]><![endif]>1600 mm (63 inch)
4
90026410rev01
2 • POINTS TO REMEMBER
2.1• Before any food is cooked in a new oven, the interior must be thoroughly cleaned (see “Daily Cleaning”).
2.2• At the end of the working day, clean the oven thoroughly inside and out; this will ensure smooth operation of the appliance and prolong its useful life.
2.3• Do not use high pressure water jets when cleaning the oven!
2.4• For daily cleaning, use only alkali based products suitable for the purpose. Do not use abrasive materials or products as they will damage the oven surfaces.
2.5• Always switch off the appliance when work is finished, shutting off all utilities (electricity, water, and gas if connected).
!
2.9 • CAUTION
No cooking with alcohol added is permitted!
2.10• Failu re t o observ e basi c safety guidelines may jeopardize the smooth operation of the oven and expose the operator to serious danger!
The manufacturer accepts no liability if the original function of the oven is altered or there is tampering or failure to observe the instructions given in the manuals.
2.6• Avoid any operation that might cause cooking salt to be deposited on the steel surfaces of the oven; if salt is accidentally spilled, rinse off thoroughly without delay.
2.7• After steam cooking, open the door carefully to avoid being hit by the rush of residual steam escaping from the oven.
Failure to observe this warning may be dangerous for the operator.
2.8 • To ensure safe operation of the oven, do not obstruct the vents or any other opening on the oven!
2.11• To ensure long term efficiency and reliability of the oven, scheduled servicing should be carried out at least once a year. With this in mind, customers are recommended to sign a service agreement.
5
90026410rev01
3 • DESCRIPTION OF KEYS
3.1 |
• CYCLES (KEY 1) |
3.8 • AUTOMATIC HUMIDITY |
|
Allows to set, recall and display the cooking |
CONTROL KEY (KEY 12) |
|
cycles. |
This key also performs the function of a |
|
The LEDs on with a fixed light indicate the |
manual humidifier when pressed with |
|
cycles set. |
cooking in progress (key light on). |
|
The flashing LED indicates the cycle in |
This function is useful for foods that |
|
progress. |
require added humidity when cooking. |
|
|
Press the key and hold for as long as it is |
3.2 |
• CONVECTION (KEY 2) |
wished to let moisture into the oven, the |
|
CONVECTION cooking mode key. |
corresponding LED will light up for as long |
|
|
as the key is pressed. |
3.3 |
• STEAM (KEY 3) |
|
|
STEAM cooking mode key. |
Note: The appliance is fitted with |
|
|
a n automati c syste m fo r reducing |
3.4 |
• COMBI (KEY 4) |
the cavity temperature in all cooking |
|
COMBI cooking mode key. |
modes. If the temperature exceeds the |
|
|
display setting by 30°C, the humidifier |
3.5 |
• FAN SPEED (KEY 5) |
automatically directs cold water into |
|
Fan speed selection key, normal with light |
the oven and the temperature is rapidly |
|
off, reduced speed and power with light |
lowered. This precludes the possibility |
|
on. |
that food could start cooking with too |
3.6 |
• RECIPES (KEY 6) |
high a temperature in the oven. In |
|
Allows to set, recall and display the cooking |
addition, the added moisture prevents |
|
programs, the memorised recipes and |
foods from drying up. |
|
service programs (e.g. washing the oven). |
|
3.7 |
• CORE PROBE (KEY 11) |
|
|
Used to activate the core probe cooking |
|
|
setting. |
|
6
90026410rev01
3 • DESCRIPTION OF KEYS
3.9• OVEN STEAM EXTRACTION VENT KEY (KEY 13)
This function is only activated in convection mode. Pressing the key opens the cavity vent, allowing the escape of moisture from the cavity. (LED on = vent open; LED off = vent closed, flashing LED = vent in operation).
The position of the vent (vent open/vent closed) can also be saved in several cycles of a program.
3.10 • OVEN LIGHT KEY (KEY 14)
Pressing this key switches on the oven light, permitting the operator to check the progress of the cooking.
3.11• MAIN SWITCH - START-STOP (KEY 15)
Press button 15 for 3 seconds
Allows the activation of the control panel, activates selfdiagnosis.
START-STOP button: allows to start and stop the cooking in progress.
•Button light on: START, cooking started.
•Flashing button light: TEMPORARY STOP obtained by opening the door. Cooking and remaining time stop. By closing the door, cooking starts again.
•Button light off: DEFINITIVE STOP obtained by pressing key 15: cooking stops definitively as if the time has expired.
7
90026410rev01
4 • MANUAL SETTINGS FOR ONE-PHASE COOKING
OPERATIONS
4.1 • |
SWITCH ON |
Note: Approximatel y 1 0 sec. after |
|
Press button 15 for 3 seconds. Whenever a |
releasing the knob, the display will revert |
|
symbol appears in the anomalies display |
to the actual oven temperature. |
|
(display 7-9) see the “Selfdiagnosis and |
|
|
anomalies key” chapter. |
|
|
|
4.4A • SET THE TIME |
|
|
The time display 9 shows [ InF ]. |
4.2 • |
COOKING MODE SELECTION |
Turn knob 10: |
|
The cooking mode buttons LEDs flash: |
- to the right to set the cooking time; |
|
press the button of the desired cooking |
- to the left to set infinite time [ InF ]. |
|
mode (2 - 3 - 4). The selected cooking |
|
|
mode LED will remain on with a fixed light. |
Or |
|
|
4.4B • SET CORE PROBE |
4.3 • |
SET THE TEMPERATURE |
See “Setting the core probe”. |
|
The temperature display shows a value |
The settings are saved approx. 10 seconds |
|
of 130°C. Turn knob 8 to set the |
after the last setting. |
|
temperature (to the right increases, to the |
|
|
left decreases), which will be shown in the |
|
|
display. |
4.5 • SETTING A NEW COOKING |
|
|
If you wish to program a new cooking, the |
previous cooking must be reset by pressing button 1 for 3 seconds, after which the cooking mode LEDs flash to indicate it has been reset.
4.6 • SAVING THE COOKING MODE
If you wish to save the cooking, press knob
10 for 3 seconds.
The first free program will appear on display 7, select the desired program number by turning knob 8 and confirm by pressing knob 8.
8
90026410rev01
4 • MANUAL SETTINGS FOR ONE-PHASE COOKING
STARTING THE COOKING PROGRAM
OPERATIONS
|
Place the food in the oven. Refer to the |
Displaying and changing saved values |
|
“Practical Advice” heading for more |
If, during cooking, it is necessary to check |
|
information. |
the settings, press key 1, the displays will |
|
If the core probe is to be used, refer to |
blink. |
|
“Setting the core probe”. |
If the values displayed have to be modified, |
|
|
use the relevant knob or keys. |
|
|
Press the knob to acquire the values |
4.7 |
•START |
modified or wait for about 10 secs. the new |
|
Press key 15 to start cooking: The |
data is saved automatically, the displays |
|
LED associated with the key remains |
are fixed on the real values. |
|
permanently alight. |
|
|
At this point ... |
Note: When switching on the appliance |
|
the temperature display 7 indicates the |
for the first time of the day, the steam |
|
actual oven temperature. |
generator drains the water contained, |
|
|
it turns on timed steam generator |
|
The time display 9 indicates the time |
washing, then, after filling with water, it |
|
remaining to complete cooking. |
AUTOMATICALLY PREHEATS the steam |
|
|
generator. When starting a program that |
|
|
includes steam or combi cooking cycles, |
4.8 • |
END OF COOKING |
the program is automatically started |
|
If infinite time has been selected, stop |
as soon as the steam generator has |
|
cooking manually by pressing key 15 for a |
reached the preheating temperature so |
|
few seconds (LED next to key 15 OFF). |
as to avoid starting the program without |
|
If a cooking time or core probe temperature |
any steam. The intermittent LED of key 15 |
|
has been entered, a beep will be generated |
indicates that the steam generator has not |
|
when the time elapses or the set probe |
yet reached the preheating temperature. |
|
temperature has been reached to indicate |
|
that cooking has terminated (LED next to key 15 OFF).
To stop the signal just open the door or press a knob (8 - 10). Remove the food from the oven, following the directions given under paragraph 2.7 of the “Points to remember” heading”.
9
90026410rev01
5 • MANUAL SETTINGS FOR COOKING WITH UP TO 4 CYCLES IN SEQUENCE
OPERATIONS
5.1 • |
SWITCH ON |
5.4A • SET THE TIME FOR CYCLE 1 |
|
Press button 15 for 3 seconds. Whenever |
The time display shows [ InF ]. |
|
a symbol appears in the anomalies display |
Turn knob 10: |
|
(display 7-9) see the “Selfdiagnosis and |
to the right to set the cooking time; |
|
anomalies key” chapter. |
to the left to set infinite time, [ InF ] thus |
|
|
utilizing the first cycle as preheating. |
|
Note: cooking in manual mode with |
|
|
several phases in sequence allows the |
Or |
|
pre-heating of the empty cooking chamber |
|
|
before cooking: just set the cycle time 1 |
5.4B • SET THE CORE PROBE |
|
at infinite [ InF ]. On reaching the pre- |
FOR CYCLE 1 |
|
heat temperature, a cyclic acoustic signal |
Refer to “Setting the core probe”. |
|
and [ LoA ] on the display inform that is |
|
|
time to use the oven. When the door is |
|
|
closed, the Cycles button 1 displays the |
5.5 • SELECT CYCLE 2 AND THE |
|
second LED (2) flashing, which indicates |
FOLLOWING ONES |
|
activation of the cooking cycle 2. |
(UP TO 4 CYCLES) |
|
|
Press the cycles button 1, the second |
|
|
flashing LED (2) switches-on on the |
5.2 • |
SELECT |
cycles button. Proceed with setting as per |
|
The cooking mode buttons LEDs flash: |
paragraph 5.2. If other phases are desired, |
|
press the button of the desired cooking |
follow the same sequence. |
|
mode (2 - 3 - 4). The selected cooking |
|
|
mode LED will remain on with a fixed light. |
|
|
|
5.6 • SETTING A NEW COOKING |
5.3 • |
SET THE TEMPERATURE OF |
If you wish to program a new cooking, the |
|
CYCLE 1 |
previous cooking must be reset by pressing |
|
Turning knob 8 sets the cooking |
button 1 for 3 seconds, after which the |
|
temperature, which is shown on the |
cooking mode LEDs flash to indicate it has |
|
relevant display. |
been reset. |
5.7 • SAVING THE COOKING MODE
If you wish to save the cooking, press knob
10 for 3 seconds.
The first free program will appear on display 7, select the desired program number by turning knob 8 and confirm by pressing knob 8.
10
90026410rev01
5 • MANUAL SETTINGS FOR COOKING WITH UP TO 4 CYCLES IN SEQUENCE
STARTING THE COOKING PROGRAM
OPERATIONS
5.8 • START |
5.9 • END OF COOKING |
Press key 15 to start cooking: The |
An acoustic signal informs that cooking has |
LED associated with the key remains |
ended (LED at the side of button 15 OFF). |
permanently alight. |
To stop the signal just open the door or |
|
press a knob (8 - 10). |
At this point ... |
Extract the product from the cooking |
the temperature display 7 indicates the |
chamber following the indications in |
actual oven temperature. |
paragraph 2.7 in the “Particular indications” |
|
chapter. |
The time display 9 indicates the time |
|
remaining to complete cooking. |
|
The luminous dot alongside the value |
Displaying and changing saved values |
indicates: |
If, during cooking, it is necessary to check |
blinking = cooking in progress; |
the settings, press key 1, the displays will |
permanently alight = cooking suspended. |
blink. |
This occurs, for instance, when opening the |
If the values displayed have to be modified, |
door (refer to “Operating Details”). |
use the relevant knob or keys. |
|
Press the knob to acquire the values |
|
modified or wait for about 10 secs. the new |
|
data is saved automatically, the displays |
|
are fixed on the real values. |
11
90026410rev01
6 • ENTERING AND SAVING A PROGRAM
OPERATIONS
6.1 • |
SWITCH ON THE OVEN |
6.5A • SET THE TIME OF CYCLE 1 |
|
|
Press button 15 for 3 seconds. Whenever |
|
The time display shows [InF]. |
|
a symbol appears in the anomalies display |
|
Turn knob 10: |
|
(display 7-9) see the “Selfdiagnosis and |
|
to the right to set the cooking time; |
|
anomalies key” chapter. |
|
to the left to set infinite time, [InF] thus |
|
|
|
utilizing the first cycle as preheating. |
6.2 • |
SELECT THE PROGRAM |
|
Or |
|
Press the Recipes button 6, the display will |
|
|
|
show [ACC], turn the knob 8 until [Pro] |
6.5B • SET THE CORE PROBE |
|
|
is displayed and confirm by pressing the |
|
FOR CYCLE 1 |
|
knob 8. |
|
Refer to “Setting the core probe”. |
|
Turn the knob until the first free program |
|
|
|
is displayed (cooking mode LED flashing |
|
|
|
and also program number on the display 7 |
6.6 • |
SELECT CYCLE 2 |
|
flashing) and confirm by pressing knob 8. |
|
AND THE FOLLOWING ONES |
|
|
|
(UP TO 4 CYCLES) |
|
Caution |
|
Press the cycles button 1, the second |
|
|
|
flashing LED (2) switches-on on the |
|
The program is “new” when the LEDs of the |
|
cycles button. Proceed with setting as per |
|
cooking mode buttons and the program |
|
paragraph 6.3. If other phases are desired, |
|
number flash on the display 7. |
|
follow the same sequence. |
|
The program is “busy” when one LED of the |
6.7 • |
SAVING THE PROGRAM |
|
cooking mode buttons and the program |
|
Hold button 1 down for 3 seconds, display |
|
number on the display 7 have a fixed light. |
|
7 shows [REC], confirm memorisation by |
|
|
|
pressing knob 8. |
|
|
|
The program number where the cooking |
6.3 • |
SELECT |
|
mode has been saved is shown on the |
|
The cooking mode buttons LEDs flash: |
|
display 7. |
|
press the button of the desired cooking |
|
|
|
mode (2 - 3 - 4). The selected cooking |
|
|
|
mode LED will remain on with a fixed light. |
|
|
6.4• SET THE TEMPERATURE OF CYCLE 1
Turning knob 8 sets the cooking temperature, which is shown on the relevant display.
12
90026410rev01
7 • SELECTING AND STARTING A SAVED PROGRAM
OPERATIONS
7.1 • SWITCH ON
Press button 15 for 3 seconds. Whenever a symbol appears in the anomalies display (display 7-9) see the “Selfdiagnosis and anomalies key” chapter.
7.2 • RETRIEVE
Press the Recipes button 6, the display will show [ACC], turn the knob 8 until [Pro] is displayed and confirm by pressing the knob 8.
Turn the knob 8 to select the program number to be recalled (see following list of recipes), shown on the display 7.
CAUTION: If the program requires using the core probe, connect the probe to the front panel or the display will show “Err SP”
(probe error). See “self-diagnosis and fault identification”.
7.3•START
Viewing the settings
Whenever it should become necessary during cooking to control the values set for the current phase, press button 1. If the settings of the next phases are to be displayed, press button 1 and turn the knob until the display shows the phase of interest.
7.3a • |
7.3b • |
7.3c • |
STARTING A PROGRAM WITH |
STARTING A PROGRAM WITH |
S T A R T I N G A P R O G R A M |
PREHEAT |
PREHEAT EXCLUDED |
WITHOUT SAVED PREHEATING |
If the retrieved program has |
Introduce the food (if the |
Place the food in the oven (if |
preheating, display 9 will show |
program envisions phases with |
the program includes cooking |
[ InF ]. |
core probe, insert the needle into |
phases with the core probe, |
Press key 15 to start preheating. |
the product). |
insert the probe in the food). |
A beep and the inscription |
Start cooking by pressing button |
Start the first cooking cycle by |
[ LoA ] on the display will signal |
15 (LED on with fixed light). |
pressing key 15 (LED on steady). |
when the oven has reached the |
Press button 1 for 3 seconds |
|
temperature. |
or turn knob 10 until the time is |
|
Place the food in the oven (if |
taken to zero. |
|
the program includes cooking |
An acoustic signal and LED 2 |
|
phases with the core probe, |
flashing on button 1 indicate that |
|
insert the probe in the food). |
the pre-heating phase has been |
|
Close the door. |
excluded. |
|
The Cycles 1 button shows the |
Warning: pre-heating is not |
|
second LED (2) flashing, which |
onl y necessar y whe n the |
|
indicates the activation of the |
cooking chamber is already in |
|
cooking cycle 2. |
temperature. |
|
|
|
|
13
90026410rev01
8 • DELETING A SAVED PROGRAM
8.1 • SWITCH ON
Press button 15 for 3 seconds.
8.2 • RETRIEVE
Press the Recipes button 6, the display 7 will show [ACC], turn the knob 8 until [Pro] is displayed and confirm by pressing the knob. Turn the knob 8 to select the program number to be recalled, shown on the display 7.
8.3 • DELETING
Hold button 1 down for 3 seconds, display 9 shows [DEL], confirm cancellation by pressing knob 10.
Whencancellationhastakenplace,theLEDs of the buttons 2 - 3 - 4 flash, indicating that the program is empty.
9 • TEMPORARILY ALTERING A SAVED PROGRAM
Foreword
Th e applianc e permit s temporarily modifying the saved program, that is for cooking in progress only. The program to be changed must have been started (key 15 with LED on steady)! When the program is stored for
a product with a different size, for which it is necessary to lengthen the cooking times, it may be necessary to raise the temperature or change any of the other parameters.
OPERATIONS
Retrieve the program and start cooking, as described previously.
To modify the memorised program:
Cooking mode
... press the key corresponding to the required cooking mode, wait for 10 seconds
(TIME OUT) and the change will be saved automatically.
Increase/decrease temperature
... Turn the knob 8 to set the new temperature value, confirm by pressing the knob or wait 10 seconds (time out). The modification is saved automatically.
Increase/decrease time
... Turn the knob 10 to set the new temperature value, confirm by pressing the knob or wait 10 seconds (time out). The modification is saved automatically.
Increase/decrease core probe temperature
... Turn the knob 10 to set the new temperature value, confirm by pressing the knob or wait 10 seconds (time out). The modification is saved automatically.
Increase/decrease value AUTOMATIC HUMIDITY CONTROL
... Press button 12, the led flashes, set the new value by turning knob 10, confirm by pressing the knob or wait for 10 seconds (time out). The modification is saved automatically.
Note: The program display 7 shows the temporary change with two steady luminous dots.
The change made is cancelled when the cooking time elapses: the program will remain in the original version.
14
90026410rev01
10 • SELECTING AND STARTING A PRE-STORED RECIPE
OPERATIONS
10.1 •SWITCH ON
Press button 15 for 3 seconds.
10.2 •RETRIEVE
Press the Recipes button 6. The display shows [ACC], confirm by pressing the knob 8.
Turn the knob 8 to select the recipe number to be recalled (see following list of recipes), shown on the display 7.
IMPORTANT: if the recipe involves the use of the core probe, connect the probe to the front panel, otherwise the display will indicate the following fault “Err SP” (Core probe error) See chapter “Self-diagnosis and fault identification”.
10.3 •START
Viewing the settings
Whenever it should become necessary during cooking to control the values set for the current phase, press button 1. If the settings of the next phases are to be displayed, press button 1 until the display shows the phase of interest.
10.4 •COPYING A PRESET RECIPE
A preset recipe can be copied in the personal programs to then edit it.
Press button 1 for 3 seconds, [REC] appears on display 7 and confirm the copy by pressing knob 8.
The first free program will appear on display 7, select the desired program number by turning and pressing knob 8.
10.3a • |
10.3b • |
STARTING A PROGRAM WITH PREHEAT |
STARTING A RECIPE WITHOUT PREHEATING |
If the recipe selected includes a preheating phase, |
Place the food in the oven (if the recipe includes |
the display 9 shows [ InF ]. |
core probe cooking phases, insert the probe |
Press button 15 to start pre-heating. |
needle into the food). |
A cyclical acoustic signal and [ LoA ] on the |
Start cooking by pressing button 15 (LED on with |
display inform when the chamber has reached the |
fixed light). Press button 1 for 3 seconds or turn |
temperature. |
knob 10 until the time is taken to zero. |
Introduce the food (if the program envisions |
An acoustic signal and LED 2 flashing on button |
phases with core probe, insert the needle into the |
1 indicate that the pre-heating phase has been |
product). |
excluded. |
Close the door. |
Warning: pre-heating is not only necessary when |
The Cycles button 1 shows the second LED (2) |
the cooking chamber is already in temperature. |
flashing, which indicates the activation of the |
|
cooking cycle 2. |
|
|
|
15
90026410rev01