- 1 -
Real time Digital Video recorder
DIGITIAL VIDEO RECORDER
(4/8 channel)
USER’S MANUAL
RoHS
IRIS-U
IVE-1004D/1008C/1016C
USER'S MANUAL
WWW.LAFI-SA.COM
IVE-1004D-1008C-1016C
USER'S MANUAL
Important Safety Instructions.
z Read and Keep these instructions
z Heed all warnings
z Follow all the instructions
z Do not use this apparatus near water and Clean only with dry cloth
z Do not install near any heat sources such as radiators, heat registers, or other apparatus that
produce heat
z Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
z Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE.
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
.
FCC For Class A digital device
A CLASS A digital device that complies with Parts 15 of the FCC Rules.
Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
Including interference that may cause undesired operations.
The lightning flash with an arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “ dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
presence of important operating and maintenance (Servicing) instructions in the
literature accompanying the appliance
- 2 -
CONTENTS
1. Product Overview
1.1 Packing Contents ··············································································· 5
1.2 Front ··············································································· 6
1.3 Rear ················································································ 6
1.4 Remote Controller ················································································ 7
2. Installing Product
2.1 Installing HDD ················································································· 9
2.2 Connecting Camera and Audio Device ························································· 9
2.3 Connecting Monitor ·············································································· 10
2.4 Connecting Optional Device ····································································· 10
2.5 Connecting Network ················································································ 10
2.6 Connecting Power Supply ········································································ 10
3. Operation
3.1 Turning On ·························································································· 12
3.2 Initial Screen ······················································································· 12
3.3 Screen Layout ························································································ 12
3.4 Other Functions of Remote Controller ··························································· 15
3.5 Mouse ································································································· 16
3.6 Mobile Viewer ······················································································· 17
4. MENU
4.1 How to display Menu window ····································································· 20
4.2 Setup Menu ·························································································· 21
4.2.1 Display ·························································································· 21
4.2.2 Camera ························································································· 22
4.2.3 Record ·························································································· 25
4.2.4 Event ·························································································· 27
4.2.5 Storage ························································································ 31
4.2.6 Network ························································································ 31
- 3 -
4.2.7 System ·························································································· 36
4.3 Search ························································································ 40
4.3.1 Search by Time ················································································ 41
4.3.2 Search by Calendar ·········································································· 41
4.3.3 Search by Event ··············································································· 41
4.3.4 Go to First ················································································ 42
4.3.5 Go to Last ················································································ 42
4.3.6 Search mode ················································································ 42
4.4 Function ························································································· 43
4.4.1 PTZ ························································································· 43
4.4.2 Audio ························································································ 43
4.4.3 Backup ························································································· 44
4.4.4 Log View ························································································· 44
4.5 OSD OFF ···························································································· 45
4.6 REC ····························································································· 45
4.7 Log Out Control ·················································································· 45
5 Specification ············································································
46
Trouble shooting ·············································································
47
- 4 -
1. Product Overview
- 5 -
1.1 Packing Contents
Once opening the product box, please check out whether there are all contents as follows
and there are some visible damages. If any of these items is missing or damaged, contact your
supplier immediately before using the product.
DVR product Remote control & Battery
Power adaptor Software / User’s Manual CD
Power cable HDD Screws
HDD Cable [Included in Set]
- 6 -
1. 2 Front
1. USB PORT
USB device(mouse, memory stick, HDD) can be
connected
2. LED
LED indicators that show power, recording & network
status
1.3 REAR
1. DC 12V POWER
Connect Power Adaptor included in Box
2. ETHERNET
10/100MB LAN port
3. USB PORT
USB Devices(mouse, memory stick, HDD) can be
connected
4.
485 PORT
485 port has +, and – terminals
GROUND
G for Ground used for earth
ALARM
A for Alarm, which signal occurs
SIGNAL
S for Signal
5. SPOT OUT
Connect analog TV monitor for spot (Composite)
6. VGA OUT
Connect VGA monitor
7. AUDIO IN/OUT
One channel Audio IN/OUT
8. VIDEO IN
VIDEO INPUT PORTS for 4 Channels
9. VIDEO IN
VIDEO INPUT PORTS for 8 Channels
10. IR
Connect IR extension cable
12 3 456789 10
1 2
- 7 -
1.4 Remote controller
1) REC : Record button
2) DVR-ID
3) Number button
4) AUDIO : Audio ON / Mute
5) BACKUP :
Back up recorded data to other device
6) MENU :
Go to ‘MENU’ mode to setup values
7) OSD : Show or Hide OSD
8) PTZ : Control Pan/Tilt/Zoom camera.
9) Digital Zoom
10) Direction (▲,▼,◀,▶)
Move cursor or control PTZF camera
ENTER
Select sub item in system setup mode
11) SEARCH : Search recorded video
12) LOG : Show running status of DVR system
13) ◀◀ : Reverse play
14) ▶I : Play or Pause during playback
15) ▶▶ : Fast forward play
16) ■ : Stop playback and go to Live mode
17) SPOT : Not Operated in this model
18) PIP : Go to PIP mode
19) POP : Enlarge specific channel in Live mode
20) SEQ : Show each camera rotation
21) Full screen mode
22) Quad
screen mode
23) 9 Division screen mode
Operated only for 8ch or 16 channels
24) 16 Division screen mode
Operated only for 16 channels
1
3
4
7 6
8
10
11
9
13
12
14
17
22
19
16
15
2
5
21
23
24
18
20
- 8 -
2. Installing Product
- 9 -
2.1 Installing HDD
1 HDD can be installed inside the product and install HDD before you start the product.
Be careful not to be harmed by sharp edges of the product.
(1) Loosen screws on the back to detach the
top cover.
(2) Lift the end of top cover and pull out
from product.
(3) To install HDD, you should upside down
the set, and HDD can be installed onto
bottom with screw.
(4) Connect HDD Power and cable to HDD.
(5) Insert top cover to product as side
picture and tighten screws again.
2.2 Connecting camera and audio device
Connect video signal cable (BNC type) into VIDEO IN port on rear of the product.
Connect RCA cable from microphone into AUDIO IN port on rear of the product.
Connect RCA cable into AUDIO OUT port on rear of the product and into audio device.
Audio OUT
Audio IN
Camera input
2 1
- 10 -
2.3 Connecting monitor
Connect spot and VGA port in DVR to monitor
2.4. Connecting Optional device
You can connect and control the PTZ device supporting RS-485 communication.
2.5 Connecting Network
Connect LAN cable (RJ45) to Ethernet port on rear of the product.
2.6 Connecting power supply
Connect provided power cable to AC-DC adaptor.
Connect the adaptor to DC power port on rear of the product.
Connect AC power plug to the plug socket.
LAN cable (RJ45)
INTERNET
VGA
Spot (BNC)
- 11 -
3. Operation
- 12 -
PLEASE REMIND THAT THE HDD SHALL BE INSTALLED AT FIRST BEFORE USING DVR.
3.1 Turn on
z Please connect Power Adaptor included in Box into power DC terminal.
There is no separate power switch, so The DVR shall turn on automatically as soon as it is
connected.
3.2 INITIAL SCREEN
The below screen will be shown after booting is over.
Please move the pointer into password window with mouse or up/down key of
remote controller, and then press enter button in remoter controller or right
button of mouse. The below enter password window will be shown, and you input
“0000” 4 digits. The default password is “0000” 4 digit. After input “0000”, the
Log-in window will be shown again. Select LOGIN icon, and you can start to use
DVRs
3.3 Screen Layout
You can see the below items according to your selection on function.
- 13 -
3.3.1 Icons in Live Display Mode
In Live display mode, icons will be indicated on the screen to notify the system mode or status.
Below are the icon categories, which are indicated on the monitor.
Icon to be shown
at right-upper corner on each channel
Icon to be shown
at left-bottom corner on full screen.
Selects specific 1ch with full screen
When Motion Detected
Screen-Division mode
When Sensor Activated
HDD capacity usage status
PTZ
When USB memory stick & HDD
Recording
When DVR is accessed via network
When ID of remote control is set
Icon to be shown in 1ch full screen mode
Channel sequence mode
Digital x2 Zoom
3.3.2. Playback Buttons
If you select search mode, the status will be shown in the upper side of screen.
Now status
- This rectangular show the now status of playback.
- If you select ▶, the mark will be changed to ▶,
- And the mark will show ▶▶, when ▶▶ is selected
◀◀ Backward
- Control backward speed.
- Move frame by frame reversely in pause mode
▶
Play/Pause - Play or Pause the video
▶▶ Fast Forward
- Control forward speed.
- Move frame by frame forwardly in pause mode
■
Stop
Stop the playback and go to Live mode
Menu button also stop playing.
Quick Search - If you click this Icon, the Search sub-menu will pop up
- 14 -
Play speed -◀◀ / ▶▶ x8, x32, x128 supported
How to use Playback bar
- Play starts with PLAY button.
If you press PLAY button in LIVE mode, or select one thing in SEARCH SUB-MENU, DVR will prepare
to play the recording data from the point you selected
- Playback mode changing
To display different screen mode, click the Monitor Icon on screen and select different mode.
You can control playback speed with ◀◀ / ▶▶ button. Click ◀◀ / ▶▶ button once then it will
be x8, twice will be x32 then 3 times click is x128.
After clicking ■ (stop button) , message will pop up in case of clicking by mistake.
3.3.3. Other Icons
3.3.3.1 HDD STATUS
It indicates capacity of HDD, the percentage show the usage of HDD.
3.3.3.2. SCREEN SHOW STATUS
You can select how screen will display.
In Live MODE, there are 5 modes : PIP, POP, Sequence, Quad, 9
But the 9 cannot operate in 4 channels.
In play mode, there are 2 modes : Quad, 9,
Also, only quad mode can be operated in 4 channels.
3.3.3.3. CHANNEL ICON
You can change channel displays on screen. There are 1~4 in 4ch product, and 1~8 in 8ch.
3.3.3.4. USB ICON
This Icon will be shown after you attach USB into DVR,
3.3.3.5. NETWORK ICON
This Icon will be shown while someone access DVR through Network with CMS, or Web-viewer.
3.3.3.6. Remote controller ID Icon
This Icon will be shown if you set up system ID in system sub-menu.
The color of number of Remote control Icon will be changed to “Yellow” in case that status is
active, that is the number of remote controller matches the number of system ID.
Otherwise, the color will be changed to “RED”.
If you click Remote control ID Icon, you can see the below;
Status = Active [or De-active]
Loading...