Laden FL 1229, FL 1229 PROGRAMME CHART

60105029GB.fm Page 1 Thursday, March 23, 2006 2:33 PM
GB FL 1229 PROGRAMME CHART
A. “On/Off” Button
Cotton Synthetics Delicates
A
Max
Load
5.0
2.5
1.5
Programme
Cotton
with prewash
Synthetics
with prewash
Delicates
with prewash
Coton
avec Prélavage
Synthétiques
avec Prélavage
Délicat
avec Prélavage
Care
Labels
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.
Type of wash/Notes
During the selected washing programme the programme selector knob moves by steps clockwise through the phases
wash, rinse and spin
. Each step takes from some
seconds to several minutes.
: optional / Yes : dosing required
1)
For improved garment care spin speed is restricted to 900 rpm in this programme.
2)
For improved garment care spin speed is null in this programme.
Detergents and additives Special options Spin
Softener Main
Wash
❉ ❉ ❉
Yes Yes Yes Yes Yes Yes
Pre-
wash
Start
Delay
Départ
différé
Easy
Ironing
Repassage
rapide
Rinse Hold
Arrêt cuve
pleine
❉❉❉ ❉❉❉ ❉
max rpm
Speed
Selector
Knob
1200 Max. 95°
900 900
prewash, main
Temperature
Selector
1)
Max. 60°
1)
Max. 40°
Programme
Selector
°C
1 2 3
Cotton
Cotton
short
Daily
Synthetics All textiles
Delicates
Wool
Silk
Rinse & Spin
Spin
Short Spin
Drain
Coton 95°
Coton 60°
Tous les jours 40°
Synthétiques 60° Tous textiles 60°
Délicat 40°
Laine 40°
Soie 30°
Rinçage &
Essorage Essorage
Essorage court
Vidange
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Slightly to normally soiled textiles made of cotton and/or synthetics. Normally to heavily soiled blouses, shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. Normally soiled overalls and sports wear made of cotton, polyester,
polyamide and blends with cotton. Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme. Drain only - no spinning. Alternative method of terminating programme the
synthetic, delicate and wool programme and for premature removal of the
laundry.
5.0
3.0
3.0
2.5
2.5
1.5
1.0
1.0
5.0
5.0
1.5
❉ ❉
❉ ❉
❉ ❉
——— ———
Yes
Yes
Yes
Yes Yes
Yes Yes
Yes
— —
— —
— —
——
❉ ❉
❉ ❉
1200 Max. 95°
1200 Max. 60°
1200 Max. 60°
900 900
900 900
1200 1200
900
❉❉❉
❉❉❉
❉❉❉ ❉❉❉
❉❉❉ ❉
❉ ❉
❉ ❉ ❉
— —
— — —— ——
1)
1)
1)
1)
1)
Max. 60° Max. 60°
Max. 40° Max. 40°
Max. 30°
— — —
—— —— — — — — —
10
4
5
6 7
8 9
A B C
D
2)
Black process 45.0° 100.0 LPI
5019 601 05029
60105029GB.fm Page 2 Thursday, March 23, 2006 2:33 PM
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours:minutes) Cotton 95 5.0 49 1.90 2:00 Cotton 60 5.0 44 0.95 2:20 Cotton 40 4.5 44 0.60 2:05
Daily 40 3.0 45 0.50 1:00 Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20
Delicates 40 1.5 60 0.60 0:45
Wool 40 1.0 60 0.45 0:40
Silk 30 1.0 45 0.30 0:40
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
temperature selector
to the desired
temperature.
4. Set the
5.
Special options
spin selector
to the desired speed.
can be selected.
6. Check that the door is well closed and turn on the washing machine by pressing the
button.
OFF”
“ON/
SELECT ANY DESIRED OPTION
“Easy Ironing” button
• Can be used together with Cotton, Synthetics and Daily programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very soft.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programme “Synthetics”, “Daily” and “Delicates”.
• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.
If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.
START DELAY
1. Select the programme and temperature, any additional options and the spin speed.
2. Press the
“ON/OFF“
button. The display
flashes “0“ for 6 seconds.
3. During these 6 seconds press the “Start Delay“ button and select delay time: 0,3,6,9 hours.
4. The programme will start at the desired time, or after 6 seconds if “0“ is selected.
• To change the start delay: press the “Start Delay“ button to select time.
• To cancel the start delay: press the “Start Delay“ button until “0“ appears: the selected programme will then start.
• If options are changed during the delay time period: the programme will start with newly selected options.
• If the programme is changed during the delay time period: “Start Delay“ will switch automat­ically to “0“. Reselect the Start Delay time to activate.
with liquid detergent, a dosing aid placed
Note:
directly in the drum should be used, if the start delay has been selected.
PROGRAMME CHANGE
To reselect a programme when a cycle has already begun:
1. Switch off the appliance by pressing the “
ON/OFF
” button.
2. Select the new programme.
3. Start the programme by pressing the “
ON/OFF
” button.
PROGRAMME END
1. At the end of the programme the programme selector moves to the stop position.
2. To unload the machine wait for the door to unlock (about 1 minute).
3. Switch off the appliance, open the door and take out the laundry.
4. Close the tap and leave the door ajar to allow the drum to dry out.
NOTES AND INDICATI ONS FOR USE
WATER LEVEL
It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.
SPIN SPEED CONTROL
Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.
MOTOR NOISE
The running noises of the new, electronically­controlled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.
CLEANING THE FILTER
To ensure an impeccable function of the pump, check the filter regular and clean it if necessary .
Black process 45.0° 100.0 LPI
5019 601 05029
Loading...