Manual
SMART PICKER SERIES
AOM
acusto-optical modulators
Manual SmartPicker AOM Rev. A ENG LaCoSys Nov 2017
-2-
1 Introduction
To know this manual is essential for operating with the system. Please read it carefully and comply with the
hints for safe work with the device.
It is our policy to constantly improve the design and specifications. Accordingly, the details represented here
cannot be regarded as final and binding.
© Dissemination and copying of this manual are allowed on special request only.
All rights reserved for the case of patent or registered-design application.
More information is available at the manufacturer http://www.lacosys.com/ or at the responsible distributor.
Manufacturers address:
LaCoSys GmbH
Hans-Knöll-Straße 6
D-07745 Jena, Germany
Phone:
(+49) 3641 / 2241514
E-Mail:
mail@lacosys.com
Web:
http://www.lacosys.com
Date: November 2017
Manual SmartPicker AOM Rev. A ENG LaCoSys Nov 2017
-3-
Manual SmartPicker AOM Rev. A ENG LaCoSys Nov 2017
-4-
Content page
1 Introduction ............................................................................................................................. 2
2 Safety information ................................................................................................................... 5
2.1 General notes / Symbols ........................................................................................................... 5
2.2 Electric safety / Personnel protection insulation ........................................................................ 6
2.3 Laser safety / labeling ............................................................................................................... 7
2.4 Intended use ............................................................................................................................ 7
3 Description of the system ......................................................................................................... 8
3.1 General .................................................................................................................................... 9
3.2 AOM-output (SMA) .................................................................................................................. 9
3.3 AOM-MONITOR (OUTPUT) ........................................................................................................ 9
3.4 GATE-INPUT ........................................................................................................................... 10
3.5 PHOTODIODE INPUT (TRIGGER-IN) .......................................................................................... 10
3.6 PHOTODIODE MONITOR OUTPUT ........................................................................................... 10
3.7 Mains ..................................................................................................................................... 11
3.8 USB-Connection ..................................................................................................................... 11
3.9 AOM – INTERFACE .................................................................................................................. 11
4 Use of the device .................................................................................................................... 12
4.1 Unpacking and installation ..................................................................................................... 12
4.2 First steps............................................................................................................................... 12
4.3 Installation of software drivers ............................................................................................... 13
4.4 Installation of LabView SmartControl AOM ............................................................................. 13
4.5 Software description .............................................................................................................. 13
5 Maintenance information ....................................................................................................... 17
5.1 Warranty ............................................................................................................................... 17
5.2 Maintenance .......................................................................................................................... 17
5.3 Service ................................................................................................................................... 17
5.4 Transport ............................................................................................................................... 18
5.5 Disposal ................................................................................................................................. 18
6 Technical Data ........................................................................................................................ 19
6.1 General data .......................................................................................................................... 19
Manual SmartPicker AOM Rev. A ENG LaCoSys Nov 2017
-5-
2 Safety information
2.1 General notes / Symbols
Please read the manual carefully before putting the device into operation.
For more information of if you have questions you can contact our service or web-site www.lacosys.com .
The device was designed and built according to the standard DIN EN 61010-1 (IEC 61010-1) "Safety
requirements for electrical equipment for measurement, control and laboratory use".
The device complies with the European Directive 2004/108/EG "Electromagnetic compatibility".
The device is labelled with the - sign.
The device will be disposed according the guideline WEEE- 2002/96/EG.
Warning notes and symbols in this manual:
NOTE
This symbol marks if special attention must be paid for a fact while using the device.
ATTENTION
This symbol marks if danger for the user of the device may occur.
ATTENTION
This symbol marks a danger for the device.
ATTENTION
Laser-radiation may be emitted!
ATTENTION
Electrostatic delicate components.
ATTENTION
Please use appropriate safety precautions against electrostatic discharge (safety pack, antistatic
wristband etc.)
Manual SmartPicker AOM Rev. A ENG LaCoSys Nov 2017
-6-
2.2 Electric safety / Personnel protection insulation
The device operates with dangerous voltages internally. Do not open the device or remove pars of the case. It
is not allowed to work inside the case or at parts under dangerous voltage by the user.
The device must be used as delivered. Every modification voids warranty or liability.
All cables must be electrically insulated. The customer service or authorized staff is allowed to open
the device only.
The IP code of the device is IP2X.
Please switch off the device if you do not intend to use it for a longer time.
ATTENTION
Electrostatic charges on persons and objects may cause voltages up to 4000 V. They can discharge
invisible. To prevent aging or damage it is important to use precautions against electrical charging.
Loading...