La Cornue Gas - Electrical Requirements User Manual
Assembly instructions INSTALLATION
Page 28
LA CORNUE
Installation Guide Centenaire
08NOTINSTAL100/USA-2
Château cookers are equipped with adjustable legs so the height of the cooktop can vary from
895 mm (35.24 in) to 915 mm (36.02 in).
Remove the drawers and plinthes/toe-kicks, set the cooker in place, screw up the central legs so
the cooker rests on the outside legs and adjust the height.
Once the cooker is resting at the right height and is level, screw down the central legs to balance
the weight.
USA & CANADA
A
A
SSEMBL
SSEMBLYY
INSTR
INSTR
UCTIONS
UCTIONS
1. HANDRAIL INSTALLATION
2. RISER / BACKSPLASH INSTALLATION
3. HEIGHT ADJUSTMENT
13 mm
8 mm
Support
Plate
M8x20
M8x20
Support
Plate
M5x16
Washer
Inserts
Gas chimney protection plate comes separately in the package and needs to be installed above the
flue channel behind the gas oven.
T
his appliance must be installed by a qualified La Cornue professional in
accordance with the current regulations in the country where the appliance
is installed.
C
C
ONNECTIONS
ONNECTIONS
Electrical
connection
Terminal
Block
Gas Inlet Male
1/2 NPT connection
Rear view Ranges:
Château 90 and Château 75
24“ (620 mm)
2 1/2“ (60 mm)
Electrical
connection
Terminal
Block
Gas Inlet Male
1/2 NPT connection
Rear view Ranges:
Grand Palais 180, Château 165, Château 150 and Château 120
24 “ (620 mm)
2 1/2“ (60 mm)
Side view
All Ranges
Gas Inlet Male
1/2 NPT connection
INSTALLATION Assembly instructions
Page 29
LA CORNUE
Installation Guide Centenaire
08NOTINSTAL100/USA-2
USA & CANADA
4. G
AS CHIMNEY PROTECTION INSTALLATION
Gas oven chimney protection2 x Screw M5 x 16 mm + washer
2” (50 mm)
10 1/2” (265 mm)
Protection Plate
Opening Size 4 3/4” x 7 1/4” (120 x 185 mm)
Gas oven chimney protection
Loading...