La Cornue C1NNI, C1INI, C1MPI, C1WFI, C1ANI User Guide
...
This book contains many important safety messages.
Always read and obey all safety messages.
Installer: Leave these instructions with the appliance
Important: Save the installation instructions for the local electrical inspector’s use.
www.lacornue.com
CornuFé 44 Induction Range
User Guide
&
Installation Instructions
U111136 - 02
WARNING!
!
The anti-tip device supplied with this range must be installed when the appliance is installed. This will reduce risk of
tipping of the appliance from abnormal usage or by excessive loading of the oven door.
WARNING!
• ALL RANGES CAN TIP.
• INSTALL ANTI-TIP BRACKET PACKED WITH RANGE -
SEE INSTALLATION INSTRUCTIONS.
ArtNo.030-0030 - RM tipping
warning symbols
• A CHILD OR ADULT CAN TIP THE RANGE AND BE KILLED.
• ENGAGE THE RANGE TO THE ANTITIP DEVICE
SEE INSTALLATION INSTRUCTIONS.
• REENGAGE THE ANTITIP DEVICE IF THE RANGE IS MOVED.
• FAILURE TO DO SO CAN RESULT IN DEATH OR SERIOUS BURNS TO
CHILDREN OR ADULTS.
The following symbols are related to Safety and are used on the product and throughout this manual.
Meaning / Description Symbol
WARNING / CAUTION
An appropriate safety instruction
should be followed or caution to a
potential hazard exists.
DANGEROUS VOLTAGE
To indicate hazards arising from
dangerous voltages.
PROTECTIVE EARTH GROUND
To identify any terminal which
is intended for connection to an
external conductor for protection
against electric shock in case of a
fault, or the terminal of a protective
earth (ground) electrode.
Meaning / Description Symbol
HEAVY
This product is heavy and reference
should be made to the safety
instructions for provisions of lifting
and moving.
DISCONNECT MAINS SUPPLY
Disconnect incoming supply before
inspection or maintenance.
Contents
1. Important safety information 1
2. Range Overview 6
Cooktop 6
Cooktop control indications & warnings 7
The ovens 10
Accessories 13
Oven Lights 13
Storage 13
Telescopic runners (Optional extra) 14
3. Cooking Tips 15
4. Cooking table 16
5. Cleaning your cooker 17
To Remove Metal Rub-o 18
Control panel and oven doors 18
Ovens 18
Cleaning table 19
6. Troubleshooting 20
9. Installation safety instructions 24
10. Installation 25
Positioning the Range 26
Moving the Range 27
Fitting the Flue Grille 27
Lowering the Two Rear Rollers 27
Completing the Move 28
Levelling the Range 28
Fitting the stability bracket 28
Repositioning the Range Following
Connection 28
11. Electrical connection 29
12. Final fitting and checks 31
Assemble the range 31
Final Checks 31
Customer Care 31
Fitting the drawer 32
Removing the drawer 32
7. Installation Instructions 22
8. Service and parts 23
13. Circuit diagram 33
Induction Hob 33
Oven 34
14. Technical Data 35
15. Warranty 36
1. Important safety information
Have your appliance properly installed and grounded by a
qualied technician. The installation must conform with local
codes or, in the absence of local codes, in accordance with
the National Electrical Code ANSI/NFPA 70 or the Canadian
Electric Code, CSA C22.1.
Install only as described in the installation section of this book.
Ask your dealer to recommend a qualied technician and an
authorized repair service. Know how to disconnect the power
to the range at the circuit breaker or fuse box in case of an
emergency.
The anti-tip device supplied with this range must be installed
when the appliance is installed. This will reduce risk of tipping
of the appliance from abnormal usage or by excessive
loading of the oven door or storage drawer.
Leaning, sitting or stepping on the doors or drawer of this
range can result in serious injuries and also cause damage to
the range. DO NOT allow anyone to climb, stand or hang on
any part of the range.
Be sure your appliance is properly installed and grounded by
a qualied technician.
Important safety notice and warning
IMPORTANT INFORMATION - If you are wearing a
medical device (such as a pacemaker), consult your
doctor. The operation of the appliance may aect a
medical device.
Prior to connecting, the power cord should be
inspected for any damage. In the event of damage
please consult your electrical installer.
To prevent fire or smoke damage
Before using the range make sure all the packing materials
have been removed.
Always keep the area around the range free from combustible
materials, gasoline, and other ammable vapors and liquids.
NEVER leave any items on the range cooktop. The
hot air from an oven vent may ignite ammable
items and may increase pressure in closed
containers, which may cause them to burst. Many
aerosol-type spray cans are EXPLOSIVE when
exposed to heat and may be highly ammable.
Avoid their use or storage near an appliance.
Many plastics will burn and most are damaged by heat. Keep
plastic items away from parts of the range that may become
warm or hot. DO NOT leave plastic items on the cooktop as
they may burn, melt or soften if left too close to a vent or a
lighted burner.
Storage should not be installed directly above a range. If
anything is stored above the range, it should be limited to
infrequently used items, which can be safely stored in an area
subjected to heat from a range. Temperatures may be unsafe
for some items such as volatile liquids, cleaners or aerosol
sprays.
Destroy the carton and plastic bags after unpacking the
range. NEVER allow children to play with packaging material.
NEVER use this appliance as a space heater to heat
or warm the room. Doing so may result in carbon
monoxide poisoning and overheating of the oven.
You must provide adequate clearances between the
range and adjacent combustible surfaces. Refer to
Installation Instructions.
Save the installation instructions for the local
electrical inspector’s use.
In case of fire
DO NOT use water on grease res. NEVER pick up
a aming pan. Turn the controls o. Smother a
aming pan on a cooktop burner by covering the
pan completely with a well tting lid or baking
tray. Isolate the power source, where it is safe to
do so, either at the control or isolator. If available
use a multipurpose dry chemical or foam-type re
extinguisher.
If re is in an oven pan, smother by closing oven door. Open
doors and windows or if a hood is installed turn it on to
remove smoke and odor.
NEVER cover any slots, holes or passages in the
oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks airow
through the oven and may cause carbon monoxide
poisoning. Aluminum foil linings may also trap heat,
causing a re hazard.
It is recommended that this appliance is serviced
annually by a qualied service engineer.
DO NOT repair or replace any part of the appliance
unless specically recommended in this User
Manual. Always consult a qualied service engineer.
All other servicing should be done only by a qualied
technician, this may reduce the risk of personal injury and
damage to the range.
NEVER modify or alter the construction of a range by
removing levelling legs, panels, wire covers, anti-tip brackets/
screws, or any other part of the product.
DO NOT leave children alone.
Babies, toddlers and young children should not be allowed
near the range at any time. They should NEVER be allowed to
sit or stand on any part of the appliance.
1
DO NOT allow children to climb or play around the range.
The weight of a child on an open door may cause the range
to tip, resulting in serious burns or other injury. Teach them
not to play with controls or any other part of the range.
NEVER store items of interest to children in the cabinets
above a range or on the backguard of a range; children
climbing on the range to reach them could be seriously
injured.
DO NOT use the oven for storage.
This instruction is based on safety considerations.
Flammable materials should not be stored in an oven, the
range storage drawer or near the cooktop burners. This
includes paper, plastic and cloth items, such as cookbooks,
plasticware and towels, as well as ammable liquids. DO NOT
store explosives, such as aerosol cans, on or near the appliance.
Flammable materials may explode and result in re or
property damage.
To avoid risk of electrical shock, personal injury,
or death, make sure your range has been properly
grounded and always disconnect it from main power
supply before servicing.
Wear suitable clothing
NEVER wear loose-tting or hanging clothes while using the
range. Be careful when reaching for items stored in cabinets
over the cooktop. Flammable material could be ignited if
brought into contact with a hot surface and may cause severe
burns.
Use only dry potholders or oven gloves
Moist or damp potholders on hot surfaces may result in
burns from steam. NEVER let a potholder touch hot heating
elements.
DO NOT use a towel or other bulky cloth in place of a glove.
They might catch re if they touch a hot surface.
Use dry oven gloves when applicable – using damp gloves
might result in steam burns when you touch a hot surface.
NEVER operate the range with wet hands.
DO NOT touch the cooktop cooking areas.
The marked cooking areas on the cooktop may be hot even
if they have been o for some time. Areas near the cooking
area may become hot enough to cause burns. During and
after use, DO NOT touch, or let clothing touch or other
ammable materials contact the cooktop or areas near the
cooking area until they have had enough time to cool. These
areas include the rangetop and rear vent.
DO NOT touch heating elements or interior surfaces
of ovens.
Oven heating elements may be hot though they are dark in
color. Interior surfaces of an oven may become hot enough
to cause burns. During and after use, DO NOT touch, or
let clothing or other ammable materials touch heating
elements or interior surfaces of oven until they have had
enough time to cool.
Other range surfaces that may become hot enough to cause
burns are the broiler compartment and oven vent at the rear
of the range.
2
Oven care
ArtNo.312-0003 Moving pans
ArtNo.312-0001 Not cooking surface
Use care when opening the door. Let hot air and
steam escape before removing or replacing food
(Fig. 1.1).
NEVER heat unopened food containers. Pressure
build up may make container burst and cause injury.
Keep oven vent ducts unobstructed.
ALWAYS place oven racks in their desired location
while the oven is cool. If a rack must be moved while
the oven is hot, DO NOT let the potholders contact
the heating element in the oven.
Induction care
Important information for pacemaker and implanted insulin
pump users: The functions of this cooktop comply with the
applicable standards on electromagnetic interference. If you
are tted with a pacemaker or implanted insulin pump and
are concerned please consult your doctor for medical advice.
To fully utilize the power of your induction stove top and
to ensure longevity of performance, we recommend the
use of La Cornue approved Induction Pots and Pans. If you
decide to purchase an alternative set of pans for use on
your induction range, we would strongly recommend that
composite aluminum pans with steel inserts, example shown
Fig. 1.2, are avoided. This type of pan construction can
signicantly reduce the lifetime and performance of your
induction cook top.
Fig. 1.3
Fig. 1.1
Fig. 1.2
Fig. 1.4
Only certain types of glass, glass-ceramic,
earthenware or other glazed containers are suitable
for hotplate cooking; others may break because of
the sudden change in temperature. NEVER cook
directly on the cooktop surface (Fig. 1.3).
DO NOT cook on a broken cooktop. If the cooktop
should break, cleaning solutions and spillovers
may penetrate the broken cooktop and cause a risk
of electric shock. Contact a qualied technician
immediately (Fig. 1.4).
Should a crack appear in the surface, disconnect the
range immediately from the supply and arrange for
its repair.
NEVER leave surface units unattended at high heat
settings - boilover may cause residue, that may ignite.
ALWAYS LIFT pans o the cooktop. Sliding pans may
cause marks and scratches (Fig. 1.5).
Take care NOT TO PLACE HOT LIDS onto the cooktop
surface (Fig. 1.6). Lids that have been used to cover
a hot pan can “stick” or create a “vacuum” eect to
the glass top. Should this occur, DO NOT attempt to
lift the lid o the glass surface, this may damage the
glass. Instead slide the lid to the edge of the cooktop
and remove, taking care not to scratch the cooktop
surface. Alternatively wait until the lid has cooled to
room temperature, the vacuum has been released,
then remove the lid by lifting it from the cooktop.
Fig. 1.5
Fig. 1.6
3
Use the right size pan
General safety instructions
This appliance is equipped with cooktop zones of dierent
sizes. Use utensils with at bottoms. DO NOT use unstable
pans and position the handles away from the edge of the
cooktop.
Proper relationship of utensil to burner will improve eciency.
NEVER leave cooktop zones unattended at high
settings. Pans boiling over can cause smoking and
greasy spills may catch on re.
Protective Liners – DO NOT use aluminium foil to
line cooktop bowls or oven bottoms. Foil liners
may result in a risk of electric shock, or re and will
damage the enamel nish. NEVER allow aluminium
foil to contact the heating elements.
DO NOT use hotplate protectors, foil or hotplate
covers of any description. These may aect the safe
use of your hotplate burners and are potentially
hazardous to health.
Only certain types stainless steel, enamelled steel
pans or cast iron pans with enamelled bases are
suitable for induction cooktop cooking.
Utensil handles should be turned inward and not
over adjacent cooktop zones. If handles are left over
adjacent zones they will get hot and may burn.
This appliance is provided with rollers to facilitate
movement during installation. The range should not
be moved after installation.
This appliance must be installed by a competent person in
accordance with the installation instructions. The installation
must comply with the relevant regulations and also the local
electricity supply company requirements.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
The range should be serviced by a qualied service engineer
and only approved parts used. Have the installer show you
the location of the range circuit breaker. Mark it for easy
reference. Always allow the range to cool and then switch
o at the circuit breaker before cleaning or carrying out any
maintenance work, unless specied otherwise in this guide.
All parts of the range become hot with use and will
retain heat even after you have stopped cooking.
Take care when touching range, to minimize the
possibility of burns, always be certain that the
controls are in the OFF position and that it is cool
before attempting to clean the range.
Clean with caution. If a wet sponge or cloth is used
to wipe spills on a hot surface, be careful to avoid
steam burns. Some cleaners can produce noxious
fumes if applied to a hot surface.
Clean only parts listed in this guide.
In the interests of hygiene and safety the range should be
kept clean at all times as a build up in fats and other food
stu could result in a re.
Always keep combustible wall coverings or curtains etc. a safe
distance away from your range.
DO NOT spray aerosols in the vicinity of the range
while it is in use.
DO NOT store or use combustible materials, or ammable
liquids in the vicinity of this appliance.
Take great care when heating fats and oils, as they will ignite
if they get too hot.
Use a deep fat thermometer whenever possible to prevent
overheating fat beyond the smoking point.
4
NEVER leave a deep fry pan unattended. Always
heat fat slowly, and watch as it heats. Deep fry pans
should be only a maximum of one third full of fat.
Filling the pan too full of fat can cause spill over
when food is added. If you use a combination of oils
or fats in frying, stir them together before heating,
or as the fats melt.
Foods for frying should be as dry as possible. Frost on frozen
foods or moisture on fresh foods can cause hot fat to bubble
up and over the sides of the pan. Carefully watch for spills or
overheating of foods when frying at high or medium high
temperatures. NEVER try to move a pan of hot fat, especially
a deep fry pan. Wait until the fat is cool.
When an oven is on, DO NOT use the top of the ue (the
round holes along the back of the range) for warming plates,
dishes, drying dish towels or softening butter.
When using an electrical appliance near the cooktop, be sure
that the cord of the appliance does not come into contact
with the cooktop.
Take care that no water seeps into the appliance.
Make sure that your kitchen is well ventilated at all times. Use
extractor fans or hoods when installed.
The range is designed for cooking foods only and must not
be used for any other purpose.
The oven should NOT be used for heating the kitchen, not
only does this waste fuel but the control knobs may become
overheated.
When the oven is on DO NOT leave the oven door open for
longer than necessary.
The specication of this range should not be altered.
This appliance is heavy, take care when moving it.
When the range is not in use ensure that the control knobs
are in the o position.
5
A
B
C
E
D
2. Range Overview
Fig. 2.1
Fig. 2.2
Fig. 2.3
The 44” induction range (Fig. 2.1) has the following features:
A. 5 induction cooking zones
B. Control panel
C. Main multi-function oven
D. Main fan oven
E. Storage drawer
Cooktop
Use only pans that are suitable for induction cooktops. We
recommend stainless steel, enamelled steel pans or cast iron
pans with enamelled bases. Note that some stainless steel
pans are not suitable for use with an induction cooktop so
please check carefully before purchasing any cookware.
The controls for the induction cooktop are shown in (Fig. 2.2).
Pans made of copper, aluminium or ceramic are not suitable
for use on an induction cooktop. The kind of pan you use
and the quantity of food aects the setting required. Higher
settings are required for larger quantities of food.
Pots and pans should have thick, smooth, at bottoms
(Fig. 2.3). This allows the maximum heat transfer from the
cooktop to the pan, making cooking quick and energy
ecient. Never use a round-bottomed wok, even with a
stand.
6
The very best pans have bases that are very slightly curved
up when cold (Fig. 2.4). If you hold a ruler across the bottom
you will see a small gap in the middle. When they heat up the
metal expands and lies at on the cooking surface.
Make sure that the base of the pan is clean and dry to prevent
any residue burning onto the cooktop panel. This also helps
prevent scratches and deposits.
Always use pans that are the same size as the areas marked
on the cooktop. Using a lid will help the contents boil more
quickly.
Fig. 2.4
Take care when placing hot lids onto the cooktop
surface. Lids that have been covering boiling or
steaming foods can ‘stick’ to the ceramic glass.
Should this occur, DO NOT attempt to lift the lid o
the hotplate: this may damage the cooktop surface.
Instead, slide the lid to the edge of the cooktop
surface and remove.
Always take care before touching the surface, even
when the cooktop is turned o. It may be hotter than
you think!
Cooktop control indications & warnings
The induction cooktop comprises of ve cooking zones
containing induction elements with dierent ratings and
diameters (Fig. 2.5) each with a pan detector and residual
heat indicator, and a cooktop control display.
The cooktop control display (Fig. 2.6) informs you of the
following induction cooktop functions:
• Pan Detector
• H Residual Heat Indicator
Max: 1.85 kW
Boost: 3.0 kW
Zone 2
Zone 1
Max: 1.4 kW
Boost: 2.2 kW
Max: 2.3 kW
Boost: 3.7 kW
Zone 3
HE-2
Fig. 2.5
Max: 1.85 kW
Boost: 3.0 kW
Zone 4
Zone 5
Max: 1.85 kW
Boost: 3.0 kW
Fig. 2.6
• A Automatic Heat-up
• L Child Lock
• L1/L2 Low Temperature/Simmer Setting
• P Power Boost Setting
Pan Detector,
IMPORTANT: After use, switch o the cooktop
element by its control and DO NOT RELY on the pan
detector.
If a cooking area is switched on and there is no pan in place
or if the pan is too small for the cooking area, then no heat
will be generated. The symbol [
control display; this is the “pan-missing symbol”. Place a pan
of the correct size on the cooking area and the [ ] symbol
will disappear and cooking can begin. After 10 minutes
without detecting a pan the cooking zone will switch o
automatically.
Table 2.1 shows the minimum pan sizes recommended for
each cooking zone.
] will appear on the cooktop
Cooking zone
Front left 4 3/4 “ (120)
Rear left 5
Centre 8
Rear right 5
Front right 5
Minimum Pan Diameter
(Pan base) inches (mm)
Table 2.1
1
/2” (140)
1
/4” (160)
1
/2” (140)
1
/2” (140)
7
Power level
1 0:48
2 2:24
3 3:50
4 5:12
5 6:48
6 2:00
Automatic heat-up time at
100% (min:sec)
Note: Using pans with a base diameter smaller than those
recommended will result in a power reduction.
Residual Heat Indicator, H
After use, a cooking zone will remain hot for awhile as heat
dissipates. When a cooking zone is switched o, the residual
heat indicator symbol [H ] will appear in the display. This
shows that the cooking zone temperature is above 140 °F
(60 °C) and may still cause burns. Once the temperature has
dropped to below 140 °F (60 °C) the [ H ] will go out.
Fig. 2.7
Fig. 2.8
7 2:48
8 3:36
9
Table 2.2
Automatic Heat-up, A
This function is available on all of the cooking zones. It
allows rapid heating up of the element to bring the selected
cooking zone up to temperature. Once the zone is at the
required cooking temperature the power level will reduce
automatically to the preset level.
The function is selected by turning the control knob to the
‘A’ position. This can be selected by turning the control knob
momentarily counter-clockwise from the zero position until
the symbol [
Once the [A
of your choice (1 to 9). The pan will heat up at 100% power
for a specied time before the power is reduced to the level
selected.
When the Automatic Heat-up function is activated, the
cooktop control display will ash alternately between the [A
setting and the chosen power level.
Once the Automatic Heat-up time has ended, the cooktop
display will stop ashing and will show the chosen power
level.
The Automatic Heat-up function can be stopped by either
turning the control knob back to the “0” power setting or
turning the control knob to the “9” power setting.
A ] is shown on the cooktop control display.
] is displayed, turn the control knob to the level
]
For your guidance Table 2.2 shows the time available at
100% power depending on the power level selected in the
Automatic Heat-up mode.
Child Lock, L
To prevent the unwanted use by children, the cooktop can be
locked.
IMPORTANT: This can only be activated when all the
cooking zones are switched o.
To lock the cooktop, simultaneously turn the two left-hand
cooktop controls counter-clockwise (Fig. 2.7) and hold until
the L symbol appears in the centre of the cooktop control
display (Fig. 2.8).
Note: [A
Locking the cooktop will NOT aect the oven; it can still be
used.
To unlock the cooktop, simultaneously turn the two lefthand controls counter-clockwise and hold until the L symbol
disappears from the centre of the cooktop control display.
8
] will ash when locking the cooktop – this is normal.
Low Temperature Setting, L1/L2
This function should only be used when heating
from cold.
Each cooking area is equipped with 2 low temperature
settings:
• L1 will maintain a temperature of about 108 °F (42 °C) –
ideal for gently melting butter or chocolate.
• L2 will maintain a temperature of about 201 °F (94 °C) –
ideal for simmering (bring the pan to the boil and then
select L2 to keep soups, sauces, stews, etc at an optimal
simmer).
The maximum time this setting can be used is 2 hours, after
which the cooktop will switch o automatically. If required,
you can immediately restart the Low Temperature function by
reactivating L2 or L2.
The maximum times for all other power levels are shown in
Table 2-3.
Power Boost Setting, P
Power Level Maximum Operating Time
L1 and L2 2 hours
1 6 hours
2 6 hours
3 5 hours
4 5 hours
5 4 hours
6 1.5 hours
7 1.5 hours
8 1.5 hours
9 1.5 hours
Power Boost 10 minutes
Table 2.3
Fig. 2.9
A & B linked D & E linked
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [P ] is shown on the cooktop control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum
of 10minutes on each zone, after which the power is
automatically reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig. 2.9 shows the cooktop layout. Zones A and B are
linked together as are zones D and E. The centre area C runs
independently, regardless of the use of other cooking areas.
This means that when using zone A on Power Boost and then
switching zone B to power boost, the power to zone A will
reduce slightly. The last zone switched to Power Boost always
takes priority. Zones D and E work in the same way.
This is a built in safety device.
Deactivate the Power Boost function by turning the control
knob to a lower setting.
A D
C
B
E
9
Loading...