Page 1
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Table of Contents
User Manual page 1
Table of Contents
1. Introduction .............................................................................................................. 4
1.1. Box Content ................................................................................................................................ 5
1.2. Minimum System Requirements ..................................................................................................... 6
1.3. Views of the Rugged Hard Disk...................................................................................................... 7
1.4. Cables and Connectors ................................................................................................................ 8
1.4.1. USB Cables and Connectors .............................................................................................. 8
1.4.2. FireWire 400 Cables and Connectors ................................................................................ 9
2. Getting Connected .................................................................................................. 10
2.1. Connecting the Interface Cable .................................................................................................. 11
2.2. Launching LaCie Setup Assistant ................................................................................................. 12
2.3. Connecting Multiple Devices ....................................................................................................... 13
2.4. Disconnecting Your LaCie Hard Disk ........................................................................................... 14
2.5. Switching Interfaces ................................................................................................................... 14
3. Optional Formatting and Partitioning ..................................................................... 15
3.1. Finding the File System Format .................................................................................................... 16
3.2. Formatting for Windows Users ..................................................................................................... 17
3.2.1. Formatting from FAT32 to NTFS ....................................................................................... 17
3.2.2. Formatting from HFS+ (Apple File System) to NTFS ............................................................ 19
3.3. Formatting for Mac Users ........................................................................................................... 21
4. Troubleshooting ..................................................................................................... 22
4.1. Mac Troubleshooting ................................................................................................................. 22
4.2. Windows Troubleshooting ........................................................................................................... 24
5. Contacting Customer Support ................................................................................. 26
6. Warranty Information ............................................................................................. 28
Page 2
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Foreword
User Manual page 2
Copyrights
Copyright © 2008 LaCie. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or
transmitted in any form or by any means,
electronic, mechanical, photocopying,
recording or otherwise, without the prior
written consent of LaCie.
Trademarks
Apple, Mac, and Macintosh are registered
trademarks of Apple Computer, Inc. Microsoft, Windows 98, Windows 98 SE,
Windows 2000, Windows Millennium Edition, Windows XP and Windows Vista are
registered trademarks of Microsoft Corporation. Other trademarks mentioned in this
manual are the property of their respective
owners.
Changes
The material in this document is for information only and subject to change without
notice. While reasonable efforts have been
made in the preparation of this document
to assure its accuracy, LaCie assumes no
liability resulting from errors or omissions
in this document, or from the use of the information contained herein. LaCie reserves
the right to make changes or revisions in
the product design or the product manual
without reservation and without obligation
to notify any person of such revisions and
changes.
Canada Compliance Statement
This Class A digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
FCC Statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following conditions:
The devices may not cause harmful 1.
interference
The devices must accept any interfer-2.
ence received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try and correct the interference by one or more of the following
measures:
Reorient or relocate the receiving an- ✦
tenna.
Increase the separation between the ✦
equipment and receiver.
Connect the equipment into an outlet ✦
on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced ✦
radio/TV technician for help.
Modifications to this product not authorized by LaCie could void the FCC & Industry Canada regulations and negate
your authority to operate the product.
Manufacturer’s Declaration
for CE Certification
We, LaCie, solemnly declare that this product conforms to the following European
standards: Class B EN60950, EN55022,
EN55024
With reference to the following conditions: 73/23/EEC Low Voltage Directive;
89/336/EEC EMC Directive
This symbol on the product or
on its packaging indicates that
this product must not be disposed of with your other
household waste. Instead, it is
your responsibility to dispose of your waste
equipment by handing it over to a designed collection point for the recycling of
waste electrical and electronic equipment.
The separate collection and recycling of
your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and
the environment. For more information
about where you can drop off your waste
equipment for recycling, please contact
your local city office, your household waste
disposal service, or the shop where you
purchased the product.
CAUTION: A shielded-type power cord
is required in order to meet FCC emission
limits and also to prevent interference to the
nearby radio and television reception. It is
essential that only the supplied power cord
be used.
Tested to comply with FCC
standards for home or office
use
LaCie Rugged
Page 3
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Foreword
User Manual page 3
Only qualified persons are authorized to ✦
carry out maintenance on this device.
Read this user manual carefully, and fol- ✦
low the correct procedure when setting
up the device.
Do not open your hard drive or attempt ✦
to disassemble or modify it. Never in-
sert any metallic object into the drive;
electrical shock, fire, short-circuiting or
dangerous emissions may result. Your
hard drive contains no user-serviceable
parts. If it appears to be malfunctioning,
have it inspected by a qualified LaCie
Technical Support representative.
Never expose your device to rain, or use ✦
it near water, or in damp or wet conditions. Never place objects containing
liquids on the drive, as they may spill
into its openings. Doing so increases the
risk of electrical shock, short-circuiting,
fire or personal injury.
Health and Safety Precautions
General Use Precautions
Do not expose the hard drive to temper- ✦
atures outside the range of 5° C to 35°
C (41° F to 95° F) in operating mode.
Doing so may damage the drive or
disfigure its casing. Avoid placing your
drive near a source of heat or exposing
it to sunlight (even through a window).
Inversely, placing your drive in an environment that is too cold or humid may
damage the unit.
Always unplug the hard drive from the ✦
electrical outlet if there is a risk of lightning or if it will be unused for an extended period of time. Otherwise, there
is an increased risk of electrical shock,
short-circuiting or fire.
Do not use the hard drive near other ✦
electrical appliances such as televisions,
radios or speakers. Doing so may cause
interference which will adversely affect
the operation of the other products.
Do not place the drive near sources of ✦
magnetic interference, such as computer displays, televisions or speakers.
Magnetic interference can affect the operation and stability of your hard drive.
Do not place heavy objects on top of the ✦
drive or use excessive force on it.
Never use excessive force on your drive. ✦
If you detect a problem, consult the
“Troubleshooting” section in this manual.
Protect your hard drive from excessive ✦
exposure to dust during use or storage.
Dust can build up inside the device, increasing the risk of damage or malfunction.
Never use benzene, paint thinners, ✦
detergent or other chemical products
to clean the outside of the drive. Such
products will disfigure and discolor the
casing. Instead, use a soft, dry cloth to
wipe the device.
CAUTION: This LaCie hard disk's war-
ranty may be void as a result of the failure
to respect the precautions listed above.
ImpOrTANT INfO: Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under
no circumstances will LaCie be held liable for the recovery or restoration of this data. To help prevent the loss of your data, LaCie highly
recommends that you keep TWO copies of your data; one copy on your external hard disk, for instance, and a second copy either on your
internal hard disk, another external hard disk or some other form of removable storage media. LaCie offers a complete line of CD and
DVD drives. If you would like more information on backup, please refer to our website.
ImpOrTANT INfO: 1GB = 1,000,000,000 bytes. 1TB = 1,000,000,000,000 bytes. Once formatted, the actual available storage
capacity varies depending on operating environment (typically 5-10% less).
Page 4
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 4
Introduction1.
Your new LaCie Rugged All-Terrain Hard Disk combines portability with compatibility, convenience and a generous storage
capacity to help you manage your data. Compatible with both
Macintosh and PC computers, the Rugged Triple Interface model
can be connected via FireWire 800, FireWire 400, iLink/DV or
Hi-Speed USB 2.0 interfaces.
The Rugged is ideally suited for a wide range of high-end, hightraffic environments, including:
Digital content creation ✦
Professional data exchange ✦
Video on the go ✦
The LaCie Rugged sports a tough metal and rubber case, which,
along with its shock-resistant design, allows you to take it almost
anywhere.
LaCie hard disk Capabilities
Connects to all standard USB and FireWire (Triple Inter- ✦
face only) interfaces
Back up your computer’s internal hard drive ✦
Store and exchange data between several computers ✦
Specially-designed casing protects the hard disk from ✦
everyday bumps and harsh environments
Click to jump to a section:
Getting Connecte ✦ d
Connecting Multiple Devices ✦
Troubleshootin ✦ g
Quick Links
Page 5
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 5
Box Content1.1.
Your box contains the LaCie hard disk and items 2-6, listed below:
LaCie Rugged (USB only or Triple Interface)1.
USB cable2.
FireWire 400 cable (Triple Interface only)3.
FireWire 800 cable (Triple Interface only)4.
USB power cable5.
Quick Install Guide6.
NOTe: The User Manual and software utilities are pre-loaded
on the drive.
ImpOrTANT INfO: Please save your packaging. In the event
that the drive should need to be repaired or serviced, it must be
returned in its original packaging.
11
2
Quick Install Guide
Rugged
All-Terrain Hard Disk
3
54
6
OR
Page 6
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 6
Mac Users
Mac OS X 10.2.8 or later ✦
G4, G5, Intel Core Duo or Intel Core 2 Duo ✦
128MB RAM (512MB recommended) ✦
Available USB 2.0, FireWire 400 or FireWire 800 ✦
port
Windows Users
Windows 2000, Windows XP, Windows Vista ✦
512 MHz processor or higher ✦
128MB RAM (512MB recommended) ✦
Available USB 2.0, FireWire 400 or FireWire 800 ✦
port
Minimum System Requirements1.2.
Page 7
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 7
Exploded View
Your LaCie Rugged All-Terrain Hard Disk is equipped
with an external rubber bumper which encases the
aluminum body to protect against drops (36 in./91.4
cm or less) and other impacts. Inside the casing, internal anti-shock bumpers provide and extra mesure
of protection.
Views of the Rugged Hard Disk1.3.
Rear View - Triple Interface
USB port1.
FireWire 400 port2.
FireWire 800 port3.
USB power cable connection4.
Rear View - USB only
USB port1.
USB power cable connection2.
1
1
2
3
4
2
Page 8
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 8
Cables and Connectors1.4.
USB Cables and Connectors1.4.1.
USB is a serial input/output technology for connecting peripheral devices to a computer or to each other. Hi-Speed USB 2.0
is the latest implementation of this standard, and it provides the
necessary bandwidth and data transfer rates to support high
speed devices such as hard drives, CD/DVD drives and digital
cameras.
USB Cable
Your LaCie hard disk is shipped with a Hi-Speed USB 2.0 cable
to ensure maximum data transfer performance when connected
to a Hi-Speed USB 2.0 port. The cable will also work when connected to a USB 1.1 port, but drive performance will be limited
to USB 1.1 transfer rates.
USB Power Cable
In the event that the USB bus on your computer does not provide the necessary power to operate your LaCie hard disk, the
included USB power cable connects to an available USB port on
your computer.
The USB ports (either USB 2.0 or USB 1.1) on your computer will
help provide power to your LaCie drive.
Attach the small end of the USB power cable to the back of 1.
your LaCie drive (a).
Attach the USB end of the USB power cable to an available 2.
USB port on your computer (b).
USB Power Cable Ends
Hi-Speed USB 2.0 Benefits
Backwards compatibility: Hi-Speed USB 2.0 works ✦
with the original USB specifications.
Hot-swappable: no need to shut down or restart your ✦
computer when adding or removing devices.
Figure 1.4.3
USB Cable Ends
a
b
Page 9
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Introduction
User Manual page 9
FireWire 400, also known as IEEE 1394, is a high-speed serial
input/output technology for connecting peripheral devices to a
computer or to each other, and FireWire 800 is the implementation of the new IEEE 1394b standard.
FireWire 800 offers increased bandwidth and extended cabling
distance between devices. FireWire 800 is ideal for bandwidthintensive applications, such as audio, video and graphics.
FireWire Cables
Your LaCie hard disk is shipped with a FireWire 400 cable and
a FireWire 800 cable.
FireWire 400 Cable Ends
FireWire 800 Cable Ends
FireWire Benefits
Hot-pluggable: devices can be added and removed ✦
while the bus is active.
Isochronous data delivery: no dropped frames – ✦
FireWire supports real-time data delivery.
Flexible: up to 63 devices can be connected on a ✦
single bus.
FireWire 400 Cables and Connectors (Rugged Triple Interface only)1.4.2.
Page 10
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Getting Connected
User Manual page 10
Getting Connected2.
Installing the LaCie hard disk is easy for all users, regardless of
operating system, thanks to LaCie Setup Assistant. Install your
LaCie hard disk in two easy steps:
Step 1 – Connect an interface cable (section 2.1) ✦
Step 2 – Run LaCie Setup Assistant to format your drive for ✦
optimal performance with your system (section 2.2)
ImpOrTANT INfO: Do not connect more than one interface
cable at a time. To switch interfaces, follow the steps in section
2.5. Switching Interfaces.
ImpOrTANT INfO: Please follow the setup steps in the or-
der they are given to ensure that the LaCie hard disk volume
mounts correctly on your computer.
Page 11
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Getting Connected
User Manual page 11
USB 2.0, FireWire 400 or FireWire 800
To connect the interface cable:
Connect one end of the interface cable to your computer. 1.
Connect connect the other end of the interface cable to the 2.
matching port on the LaCie hard disk.
After a few seconds, the hard disk will mount on your com-3.
puter and appear in My Computer (Windows users) or on
your desktop (Mac users).
NOTe: In the event that the USB bus on your computer does
not provide the necessary power to operate your LaCie hard
disk, use the included USB power cable to draw additional
power from your computer to power the hard disk. See section
1.4.1. USB Cables and Connectors for more information.
Connecting the Interface Cable 2.1.
FireWire 800
FireWire 400
USB
Page 12
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Getting Connected
User Manual page 12
Before using your drive, LaCie Setup Assistant software must be
launched to format it. It will:
Optimize your drive according to your needs ✦
Copy the manual and utilities onto your LaCie hard disk ✦
ImpOrTANT INfO: LaCie recommends that you copy the
user manual and utilities onto your computer’s internal hard
drive or other medium when setup is complete.
To launch LaCie Setup Assistant:
Windows users: double click on the LaCie drive icon in “My
Computer”.
Mac users: double click on the “LaCie Setup Assistant” icon
which will appear on your desktop.
ImpOrTANT INfO: If you do not launch LaCie Setup Assis-
tant or if you quit LaCie Setup Assistant after formatting has begun, your drive will not be ready to use and will require manual
formatting. The user manual and utilities will not be available
on your drive and will have to be downloaded from the LaCie
website: www.lacie.com
TeChNICAl NOTe: The LaCie Setup Assistant does not pre-
vent you from using your computer’s native disk utility program
to format or partition your LaCie drive. Simply follow the Setup
Assistant through completion, then use your computer’s native
disk utility (Disk Management for Windows or Disk Utility for
Mac) to reformat your drive. See section 3. Optional Formatting
and Partitioning for more information.
Launching LaCie Setup Assistant 2.2.
Page 13
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Getting Connected
User Manual page 13
The FireWire 400 interface allows you to connect another hard
drive or digital video camera directly to the LaCie hard disk (this
connection is called “daisy-chaining”).
To daisy-chain devices, all devices must be connected via
FireWire. Your computer will not recognize the daisy-chained
device if the interfaces are mixed, (ex. a FireWire device attached
to a drive that is connected to the computer via the Hi-Speed
USB 2.0 interface.
TeChNICAl NOTe: When FireWire 400 and FireWire 800
interfaces are mixed in a daisy-chain, data transfers are limited
to FireWire 400 speeds.
Connect your LaCie hard disk by following the steps in sec-1.
tions 2.1 and 2.2, connecting to your computer using the
FireWire 800 cable.
2. To attach a digital video camera*:
Using the iLink/DV cable (sold separately), connect the a.
4-pin end of the cable to the 4-pin port on your digital
camera.
Connect the 6-pin end of the iLink/DV cable to the 6-pin b.
FireWire port on the back of the LaCie Hard drive.
To attach a FireWire peripheral:
Connect the FireWire 400 cable into an available a.
FireWire 400 port on your FireWire peripheral.
Attach the other end of the FireWire 400 cable to an b.
available FireWire 400 port on the LaCie hard disk .
The digital camera or peripheral device should now appear 3.
under My Computer (Windows users) or on the desktop
(Mac users).
*Some cameras do not support this configuration or may downgrade
your LaCie hard disk’s performance.
Connecting Multiple Devices2.3.
Page 14
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Getting Connected
User Manual page 14
Disconnecting Your LaCie Hard Disk2.4.
FireWire, eSATA and USB external devices feature “plug & play”
connectivity, which means that your drive can be connected and
disconnected while the computer is running. To prevent failures,
however, it is important to follow these steps when disconnecting
your LaCie hard disk.
Mac Users
Drag the hard disk icon to the trash.1.
When the icon disappears from the desktop, the drive 2.
can be disconnected.
Windows Users
From the 1. System Tray (located in the lower right-
hand side of your screen), click the Eject icon (a small
green arrow over a hardware image).
A message will appear, listing the devices the Eject 2.
icon controls (it should say, “Safely remove...”). Click
on the LaCie hard disk in this prompt.
This message will appear: “Safe to Remove Hardware” 3.
(or similar). It is now safe to disconnect the device.
Always unmount or safely disconnect your LaCie hard disk before switching interfaces. See section 2.4. Disconnecting Your
LaCie Hard Disk, for proper disconnection procedures. When
the hard disk has been safely disconnected, reconnect it with the
interface of your choice.
Switching Interfaces2.5.
Page 15
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 15
Optional Formatting and Partitioning3.
The first time you use your LaCie hard disk, LaCie Setup Assistant formats your drive according to your needs. If your
needs change, you can reformat your LaCie hard disk to optimize it for use with Windows or Mac, or for cross-platform
use. For example, if you used LaCie Setup Assistant to format
your drive to work with your Mac (HFS+), but now you want to
share your hard disk with Windows users, you can reformat it to
FAT 32 (MS-DOS) for this purpose.
You may need to format your LaCie hard disk if LaCie Setup
Assistant was interrupted or stopped. If the hard disk does not
appear in My Computer (Windows) or on the desktop (Mac), it
may not be formatted properly.
What is Formatting?
When a disk is formatted, the following things occur: the operating system erases all of the bookkeeping information on the disk,
tests the disk to make sure that all of the sectors are reliable,
marks bad sectors (i.e., those that are scratched) and creates
internal address tables that it later uses to locate information.
A hard disk must be formatted before it can be used to store
data.
What is Partitioning?
You can also divide the hard disk into sections, called partitions.
A partition is a section of the hard disk’s storage capacity that is
created to contain files and data. For instance, you could create three partitions on your drive: one partition for your office
documents, one as a backup and one for your multimedia files.
Or, if you will be sharing the drive with another person in your
household or office, you can create a partition for each person
who uses the drive. Partitioning is optional.
ImpOrTANT INfO: Please copy the User Manual and
utilities to your computer before reformatting. Reformat-
ting will erase everything from the hard disk. If you have other
data that you want to protect or continue to use, copy this information to your computer before reformatting.
File System Formats
There are three different file system format categories:
NTFS, FAT 32 (MS-DOS), and Mac OS Extended (HFS+).
Use the information below to determine which format is
best for you.
Use NTFS if…
...you will be using the drive only with Windows 2000,
Windows XP or Windows Vista (performance will generally
be greater when compared to FAT 32). This file system is
compatible in read only mode with Mac OS X 10.3 and
higher.
Use HFS+ if…
...you will be using the drive on Macs only; performance
will generally be greater when compared to FAT 32. This
file system is NOT compatible with Windows OS.
Use FAT 32 (MS-DOS) if…
...you will be using your drive with both Windows and Mac
OS X 10.3 or sharing the drive between Windows 2000
and Windows XP or Windows Vista. Maximum single file
size is 4GB.
Page 16
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 16
Finding the File System Format3.1.
You may need to know the current file system format of your
LaCie hard disk if:
You want to reformat your LaCie hard disk. The current file ✦
system format may determine the process you’ll use to reformat it.
The LaCie hard disk does not appear to mount on your ✦
computer. In this case, the file system format may prevent
your operating system from recognizing the LaCie hard disk
(ex. If you connect a hard disk formatted in HFS+ to a Windows computer).
Windows Users
Right-click My Computer and select 1. Manage from
the right-click options menu. The Computer Management window opens.
Select 2. Disk Management under Storage (you may
have to expand the Storage list to see the Disk Management option). Information about all storage devices connected to your computer appears in the right
hand pane.
Find the disk corresponding to your LaCie hard disk. 3.
NOTe: “Disk 0” is your computer’s internal hard disk. If
other storage devices are connected to your computer,
refer to the disk information in the upper pane to determine which disk is your LaCie hard disk.
The File System column in the upper pane lists the 4.
file system of each disk. Disks are listed as “NTFS”,
“FAT32” or blank (if the file system format is not recognizes, such as if it is HFS+).
Mac Users
Select 1. Utilites from the Go menu in Finder.
Open Disk Utility.2.
In the disk list on the left side of the Disk Utility win-3.
dow, find the disk corresponding to your LaCie hard
disk.
Each disk has two listings. Select the lower, indented 4.
disk name.
Refer to the 5. Format line of the information area at the
bottom of the Disk Utility window.
Page 17
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 17
Formatting for Windows Users3.2.
Before you start, connect the drive to the computer and follow
the steps in section 3.1 to find the file system format of your
LaCie hard disk.
If your disk is formatted as a FAT32 volume, proceed to ✦
section 3.2.1. Formatting from FAT32 to NTFS.
If your disk is formatted as an HFS+ volume (or unrecog- ✦
nized in Windows) , click here or proceed to section 3.2.2.
Formatting from HFS+.
Formatting from FAT32 to NTFS3.2.1.
Follow these steps if you used LaCie Setup Assistant to create an
exchange volume on your LaCie hard disk for data sharing between Windows and Mac computers or if you reformatted your
LaCie hard disk as a FAT32 volume on a Mac.
CAUTION: Following these steps will erase everything from
the hard disk. If you have information that you want to protect
or continue to use, back up this information before performing
these steps.
Right-click 1. My Computer and select Manage (Fig.
3.2.1-A). The Computer Management window opens.
Select 2. Disk Management under Storage (you may have
to expand the Storage list to see the Disk Management option). See Fig. 3.2.1-B. Information about all storage devices connected to your computer appears in the pane on
the right.
Find the disk corresponding to your LaCie hard disk. Right-3.
click in the disk allocation bar of the FAT32 volume and
select Format… from the right-click options menu (Fig.
3.2.1-B).
TeChNICAl NOTe: If you did not create an exchange vol-
ume using LaCie Setup Assistant, there may be only one volume associated with the disk.
Continued on next page…
Figure 3.2.1-B
Figure 3.2.1-A
1
2
3
Page 18
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 18
Figure 3.2.1-C
In the Format window:4.
Enter a name for the disk as you’d like it to appear on a.
your computer in the Volume label field.
Select “Perform a quick format”.b.
Leave the other options at their default values and click c.
OK.
Click 5. OK in the format warning dialog. During the formatting process, the status of the disk changes to “Formatting”
in the Computer Management window. When Formatting is complete, the status changes to “Healthy”. See Fig.
3.2.1-D.
a
b
Figure 3.2.1-D
a
b
c
Page 19
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 19
Follow the steps in this section if you used LaCie Setup Assistant
to format your drive for use with a Mac or if you reformatted your
LaCie hard disk as an HFS+ volume on a Mac.
CAUTION: Following these steps will erase everything from
the hard disk. If you have information that you want to protect
or continue to use, back up this information before performing
these steps.
Right-click 1. My Computer and select Manage (Fig.
3.2.2-A). The Computer Management window opens.
Select 2. Disk Management under Storage (you may have
to expand the Storage list to see the Disk Management option). See Fig. 3.2.2-B. Information about all storage devices connected to your computer appears in the pane on
the right.
Find the disk corresponding to your LaCie hard disk. Right-3.
click on the “Unallocated” volume in the disk allocation
bar and select New Partition… from the right-click options
menu (Fig. 3.2.2-B). The New Partition Wizard opens.
Continued on next page…
Formatting from HFS+ (Apple File System) to NTFS3.2.2.
Figure 3.2.2-A
Figure 3.2.2-B
1
2
3
Page 20
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 20
On the Welcome to the New Partition Wizard screen, click 4.
Next.
Select 5. Primary Partition and click Next.
If you would like to create more than one partition on the 6.
disk, enter the size of the first partition in the “Partition size
in MB” field. Otherwise, leave the default values and click
Next.
Choose a drive letter to assign to the drive. Click 7. Next.
Select “Format this partition with the following settings” 8.
and Enter a name for the volume as you’d like it to appear
on your computer. Select “Perform a quick format.” Click
Next. See Fig. 3.2.2-D.
Review your settings and click 9. Finish to begin the formatting process.
During the formatting process, the status of the disk chang-10.
es to “Formatting” (a) in the Computer Management window. When Formatting is complete, the status changes to
“Healthy” (b). See Fig. 3.2.2-E.
Figure 3.2.2-C
Figure 3.2.2-D
Figure 3.2.2-E
a
b
Page 21
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Optional Formatting and Partitioning
User Manual page 21
Formatting for Mac Users3.3.
CAUTION: Following these steps will erase everything from
the hard disk. If you have information that you want to protect
or continue to use, back up this information before performing
these steps.
Select 1. Utilites from the Go menu in Finder.
Open Disk Utility.2.
In the disk list on the left side of the Disk Utility window, find 3.
the disk corresponding to your LaCie hard disk. For each
disk there is a listing for the drive controller and one for
each volume on the disk. Select the listing for the controller
(ex. “153.4 GB HDT72251…” in Fig. 3.3-A).
Select the 4. Partition tab.
From the 5. Volume Scheme menu, choose the number of
partitions you want to divide the drive into (16 maximum).
You can adjust the size of each partition using the slide bar
between the partitions in the Volume Scheme area.
In the 6. Volume Information section, enter a name for each
volume (partition) and choose the volume format (Mac OS
Extended, Mac OS Standard, UNIX File System, or MSDOS).
TeChNICAl NOTe: To share a volume with Windows users,
select MS-DOS (FAT32) format.
ImpOrTANT INfO: Apple recommends that unless you
have a specific reason to use the UNIX File System (UFS), you
should use the Mac OS Extended format because it provides a
more familiar experience to Macintosh users.
Click 7. Partition. Click Partition again to close the alert
message and continue.
Mac Disk Utility will format and partition the disk according 8.
to your settings, and your drive will be ready to use.
Figure 3.3-A
Figure 3.3-B
3
4
7
5
6
Page 22
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Troubleshooting
User Manual page 22
If your LaCie hard disk is not working correctly, please refer to the following checklist to determine the source of the
problem. If you have gone through all of the points on the
checklist and your drive still does not work properly, please
check the FAQs that are regularly published on our website –
www.lacie.com. One of these FAQs may provide an answer to
your specific question. You can also visit the downloads page,
where the most recent software updates will be available.
If you need further assistance, please contact your LaCie reseller
or LaCie Customer Support (see section 5. Contacting Customer
Support for details).
Manual Updates
LaCie strives to give you the most up-to-date, comprehensive
user manuals available on the market. It is our goal to provide
you with a friendly, easy-to-use format that will help you quickly
install and utilize the many functions of your new device.
If your user manual does not reflect the configuration of the
product you purchased, please check our website for the most
current version of the user manual.
www.lacie.com
4. Troubleshooting
Mac Troubleshooting4.1.
Problem Question Solution
The drive is not recognized by the computer.
Does an icon for the drive appear on the desktop?
There should be an icon for the LaCie drive on the desktop. If the
drive does not appear, follow the rest of the Troubleshooting tips to
isolate the problem.
Does your computer’s configuration meet the minimum
system requirements for use
with this drive?
See section 1.2. Minimum System Requirements for more information.
Did you follow the correct
installation steps for the specific interface and operating
system.
Review the installation steps in section 2.1. Connecting the Interface
Cable and section 2.2. Launching LaCie Setup Assistant.
Are both ends of the FireWire,
eSATA or USB cables firmly
attached?
Check both ends of the FireWire, eSATA or USB cables and make sure
that they are fully seated in their respective ports. Try disconnecting the
cables, waiting 10 seconds, and then reconnecting them. If the drive is
still not recognized, restart your computer and try again.
Is the drive receiving sufficient
power?
If the drive is connected to your computer via USB and does not appear to mount, the drive may not be recieving enough power from
the USB bus on your computer. Try connecting the USB power sharing
cable as described in section 1.4.1. USB Cables and Connectors.
Is there a conflict with other
device drivers or extensions?
Contact LaCie Technical Support for help.
Page 23
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Troubleshooting
User Manual page 23
Problem Question Solution
The drive is not recognized by the computer.
Has the drive been formatted? If you do not launch LaCie Setup Assistant or if you quit LaCie Setup
Assistant after formatting has begun, your drive will not be ready
to use and will require manual formatting. Please see sections 3.
Optional Formatting And Partitioning and section 3.1. Finding the File
System Format.
Does your computer’s operating system support the file
system?
Check your computer’s documentation and see sections 3.1. Finding
the File System Format and 3. Optional Formatting And Partitioning
Error messages under
Mac OS 10.x.
Did you get an “Error –50”
message while copying to a
FAT 32 volume?
When copying files or folders from Mac OS 10.x to a FAT 32 volume,
certain characters cannot be copied. These characters include, but are
not limited to:
? < > / \ :
Check your files and folders to ensure that these types of characters
are not being used.
Did you get an error message
telling you that the drive has
been disconnected when
coming out of sleep mode?
Simply ignore this message. The drive will remount to the desktop.
LaCie drives conserve power by spinning down when you set your
computer to sleep mode, and when the computer is “woken” from
sleep, it does not give the drive enough time to spin-up from its sleep
mode.
Are you having problems getting your FireWire device to be
recognized?
If you are having problems with your FireWire connection under Mac
OS 10.2.x, upgrade to the latest Mac OS version.
The drive is working
slowly.
Are there other USB, eSATA or
FireWire devices connected to
the same port or hub?
Disconnect any other USB, eSATA or FireWire devices and see if the
drive’s performance increases.
The drive is not running
noticeably faster when
connected via Hi-Speed
USB 2.0.
Is the drive connected to a
USB port on your computer, or
to a USB hub?
If your drive is connected to a USB port or hub, this is normal. A
Hi-Speed USB 2.0 device can only operate at Hi-Speed USB 2.0
performance levels when it is connected directly to a Hi-Speed USB
2.0 port or hub. Otherwise, the Hi-Speed USB 2.0 device will operate
at the slower USB transfer rates.
Is the drive connected to a HiSpeed USB 2.0 port on your
computer?
Check to see that the Hi-Speed USB 2.0 drivers for both your host bus
adapter and device have been installed correctly. If in doubt, un-install
the drivers and re-install them.
Does your computer or operating system support Hi-Speed
USB 2.0?
See section 1.2. Minimum System Requirements.
Page 24
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Troubleshooting
User Manual page 24
Windows Troubleshooting4.2.
Problem Question Solution
The drive is not recognized by the computer.
Is there an icon for the drive in
My Computer?
Go into My Computer and look for an icon and drive letter assigned
to the LaCie drive. If the drive does not appear, follow the rest of the
Troubleshooting tips to isolate the problem.
Does your computer’s configuration meet the minimum
system requirements for use
with this drive?
See section 1.2. Minimum System Requirements for more information.
Is the drive recieving sufficient
power?
If the drive is connected to your computer via USB and does not appear to mount, the drive may not be recieving enough power from
the USB bus on your computer. Try connecting the USB power sharing
cable as described in section 1.4.1. USB Cables and Connectors.
Did you follow the correct
installation steps for the specific interface and operating
system?
Review the installation steps in sections 2.1. Conneccting the Interface
Cable and 2.2. Launching LaCie Setup Assistant.
Are both ends of the FireWire,
eSATA or USB cables firmly
attached?
Check both ends of the FireWire, eSATA or USB cables and make sure
that they are fully seated in their respective ports. Try disconnecting the
cables, waiting 10 seconds, and then reconnecting them. If the drive is
still not recognized, restart your computer and try again.
Have the USB, eSATA or
FireWire drivers been installed
correctly and enabled?
Open Apple System Profiler and click on the Devices and Volumes
tab. If your device is not listed, recheck the cables and try the other
troubleshooting tips listed here.
Is there a conflict with other
device drivers or extensions?
Contact LaCie Technical Support for help.
FireWire 800 does not
work under Windows
2000.
Have you installed the Windows 2000 Service Pack 4?
In order to operate FireWire 800 devices under Windows 2000, the
Service Pack 4 update must be installed. This is a free download offered on Microsoft’s website.
The drive is working
slowly.
Are there other USB, eSATA or
FireWire devices connected to
the same port or hub?
Disconnect any other USB, eSATA or FireWire devices and see if the
drive’s performance increases.
Page 25
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Troubleshooting
User Manual page 25
Problem Question Solution
The drive is not running
noticeably faster when
connected via Hi-Speed
USB 2.0.
Is the drive connected to a
USB port on your computer, or
to a USB hub?
If your drive is connected to a USB port or hub, this is normal. A
Hi-Speed USB 2.0 device can only operate at Hi-Speed USB 2.0
performance levels when it is connected directly to a Hi-Speed USB
2.0 port or hub. Otherwise, the Hi-Speed USB 2.0 device will operate
at the slower USB transfer rates.
Is the drive connected to a HiSpeed USB 2.0 port on your
computer?
Check to see that the Hi-Speed USB 2.0 drivers for both your host bus
adapter and device have been installed correctly. If in doubt, un-install
the drivers and re-install them.
Does your computer or operating system support Hi-Speed
USB 2.0?
See section 1.2. Minimum System Requirements.
The drive turns on and
off when you turn your
computer on and off (USB
and FireWire connections).
This is normal. Your drive has an autoswitching power feature, which means that if your drive is connected to your computer, turning the computer on will automatically turn the drive on. Likewise, turning
the computer off will automatically turn the drive off.
Page 26
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Contacting Customer Support
User Manual page 26
Contacting Customer Support5.
Before You Contact Technical Support
Read the manuals and review section 1. 4. Troubleshooting.
Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are 2.
correctly and securely attached.
If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can’t get your LaCie drive to work
properly, contact us at www.lacie.com. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand:
Information Where to Find Information
LaCie hard drive serial number Located on a sticker at the back of drive or on the original packaging
Macintosh/PC model
Mac users: Click on the Apple icon in the menu bar and select About
This Mac.
Windows users: Right click My Computer and select Properties >
General.
Operating system version
Processor speed
Computer memory
The brands and models of other internal and external
peripherals installed on your computer
Mac users: Click on the Apple icon in the finder bar and select About
This Mac. Select More Info... The Apple System Profiler will launch
and will list your internal and external peripherals.
Windows users: Right click My Computer and select Properties >
Hardware.
Page 27
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Contacting Customer Support
User Manual page 27
LaCie Customer Support Contacts
LaCie Asia, Singapore, and Hong Kong
Contact us at:
http://www.lacie.com/asia/contact/
LaCie Australia
Contact us at:
http://www.lacie.com/au/contact/
LaCie Belgium
Contact us at:
http://www.lacie.com/be/contact/ (Français)
LaCie Canada
Contact us at:
http://www.lacie.com/caen/contact/ (English)
LaCie Denmark
Contact us at:
http://www.lacie.com/dk/contact
LaCie Finland
Contact us at:
http://www.lacie.com/fi/contact/
LaCieFrance
Contact us at:
http://www.lacie.com/fr/contact/
LaCie Germany
Contact us at:
http://www.lacie.com/de/contact/
LaCie Italy
Contact us at:
http://www.lacie.com/it/contact/
LaCie Japan
Contact us at:
http://www.lacie.com/jp/contact/
LaCie Netherlands
Contact us at:
http://www.lacie.com/nl/contact/
LaCie Norway
Contact us at:
http://www.lacie.com/no/contact/
LaCie Spain
Contact us at:
http://www.lacie.com/es/contact/
LaCie Sweden
Contact us at:
http://www.lacie.com/se/contact
LaCie Switzerland
Contact us at:
http://www.lacie.com/chfr/contact/ (Français)
LaCie United Kingdom
Contact us at:
http://www.lacie.com/uk/contact
LaCie Ireland
Contact us at:
http://www.lacie.com/ie/contact/
LaCie USA
Contact us at:
http://www.lacie.com/contact/
LaCie International
Contact us at:
http://www.lacie.com/intl/contact/
Page 28
LaCie Rugged Hard Disk • De s i g n b y ne i l Po u l t o n Warranty Information
User Manual page 28
Warranty Information6.
LaCie warrants your drive against any defect in material and workmanship, under normal use, for the period designated on your warranty
certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its option, repair or replace the defective drive. This warranty is void if:
The drive was operated/stored in abnormal use or maintenance conditions; ✦
The drive is repaired, modified or altered, unless such repair, modification or alteration is expressly authorized in writing by LaCie; ✦
The drive was subjected to abuse, neglect, lightning strike, electrical fault, improper packaging or accident; ✦
The drive was installed improperly; ✦
The serial number of the drive is defaced or missing; ✦
The broken part is a replacement part such as a pickup tray, etc. ✦
The tamper seal on the drive casing is broken. ✦
LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused as a result.
LaCie will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited to, damage or loss
of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or inconvenience caused by service interruptions.
Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no circumstances will
LaCie be held liable for the recovery or restoration of this data.
Under no circumstances will any person be entitled to any sum greater than the purchase price paid for the drive.
To obtain warranty service, call LaCie Technical Support. You will be asked to provide your LaCie product’s serial number, and you may be
asked to furnish proof of purchase to confirm that the drive is still under warranty.
All drives returned to LaCie must be securely packaged in their original box and shipped with postage prepaid.
ImpOrTANT INfO: Register online for free technical support: www.lacie.com/register
Loading...