Labgear HDSR300 User Manual

1

SAFETY INSTRUCTIONS ........................................................................................................ 3

1. INSTALLATION OF STB .................................................................................................4

1.1

FRONT PANEL.................................................................................................................4

1.2

REAR PANEL................................................................................................................... 4

1.3

CONNECTION ..................................................................................................................5

1.4 R

EMOTE ..........................................................................................................................7

2. MAIN MENU ......................................................................................................................8

3. EDIT CHANNEL................................................................................................................ 8

3.1

TV CHANNEL LIST ..........................................................................................................8

3.2 D

ELETE ALL ..................................................................................................................10

4. INSTALLATION ..............................................................................................................10

4.1

ANTENNA CONNECTION ............................................................................................... 10

4.2

SATELLITE LIST.............................................................................................................10

4.3

ANTENNE SETUP ..........................................................................................................11

4.4

SINGLE SATELLITE SEARCH.........................................................................................11

4.5 M

ULTI SATELLITE SEARCH...........................................................................................11

4.6 TP

LIST .........................................................................................................................12

4.7

OTHER ..........................................................................................................................13

5. SYSTEM SETUP .............................................................................................................. 13

5.1

LANGUAGE..................................................................................................................13

5.2

TV SYSTEM ................................................................................................................13

5.3

DISPLAY SETTING ......................................................................................................14

5.4

LOCAL TIME SETTING.................................................................................................14

5.5

TIMER SETTING ..........................................................................................................14

5.5

PARENTAL LOCK ........................................................................................................ 15

5.6

OSD SETTING............................................................................................................15

5.7

FAVORITE ...................................................................................................................15

6. TOOLS...............................................................................................................................15

6.1 I

NFORMATION................................................................................................................16

6.2

FACTORY SETTING .......................................................................................................16

6.3

SW UPDATE BY OTA ...................................................................................................16

6.4

UPDATE BY USB .......................................................................................................... 16

6.5

USB ..............................................................................................................................1 6

6.6

REMOVE USB DEVICE SAFELY..................................................................................... 16

7. GAME ................................................................................................................................ 17

8. REC(RECORD) ................................................................................................................17

8.1 R

ECORD MANAGER ......................................................................................................17

8.2

STORAGE INFORMATION .............................................................................................. 17

8.3

DVR CONFIGURATION............................................................................................... 18

2

8.4 JUMP .............................................................................................................................18

9. OTHER FUNCTIONS INTRODUCTION.....................................................................18

9.1 PROGRAM INFORMATION..............................................................................................18

9.2

FAVORITE LIST..............................................................................................................18

9.3

PROGRAM GUIDE .........................................................................................................18

9.4

VOLUME CONTROL .......................................................................................................19

9.5

RECORD PROGRAM ......................................................................................................19

10. TECHNICAL SPECIFICATION..................................................................................20

11. TROUBLESHOOTING .................................................................................................21

3

SAFETY CAUTION：

Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

• In a closed or poorly ventilated cabinet;

• Directly on top of or under any another equipment;

• On a surface which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

• To direct sunlight or near any other equipment that generates heat;

• To rain or intense moisture;

• To any shock which may cause permanent damage to your receiver;

• To any magnetic objects, such as loudspeakers, transformers, etc.;

• To intense vibration;

• Never open the cover. It is dangerous to touch the inside of the receiver due to high

voltage currents and possible electrical hazards. Your warranty will be void if the receiver

has been opened.

• When the receiver is not used for a long period of time, you should unplug the power cord

from the wall socket.

• Do not use a damaged power cord. It may cause a fire or an electrical shock.

• Do not touch a power cord with wet hands. It may cause an electric shock.

• Place the receiver in a well-ventilated environment.

• When you are connecting the cables, be sure that the receiver is disconnected from the

mains supply voltage.

• Do not use your receiver in a humid environment.

Make sure you read this user manual before installing your receiver.

Main features:

z Slim design (230mm)

z MPEG-2, MPEG-4/ H.264 decoding

z Full USB2.0 for software updates, music playing, image viewing and recording

z 256 Colour On Screen Display

z Parental control

z Favorite lists

z Timer

z EPG/TTX/SUBTITLE supported

z Digital sound through optical output(S/PDIF)

z PVR ready supported

4

1. Installation of STB

1.1 Front Panel

1. POWER Button

Turns the receiver On/Off

2. Display (4-digi 7-segment)

4-digi displays channel information; In Standby mode, 7-segment displays local time

3. USB2.0 Port

For PVR function, software updates, and other USB functions

1.2 Rear Panel

1. LNB IN

Connect the Satellite Dish LNB.

2. LOOP OUT

Output the Dish LNB IN signal.

3. AUDIO Right and Left

These connectors give you the possibility to connect the audio signal to an external
amplifier, or the audio input of your TV.

4. VIDEO

This connector has a composite CVBS video signal for additional VCR-connections.

5. TV SCART Connector
Use this connector to connect your receiver with your TV set using a SCART cable.

6. HDMI

Use this connector to connect your receiver with your TV set using a HDMI cable.

7. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.

8. Power ON/OFF Switch

9. Power Cord

Your receiver requires a current of 100~240V AC (Auto-selectable), 50~60Hz
+/-5%.

5

Make sure to check the power specification before connecting your receiver
to the wall outlet.

1.3 Connection

Note: Before connect this HD receiver to other devices, please shut down all

devices to be connected.

z Connecting to TV

1. Connect the satellite signal from the LNB to the LNB IN connector.

2. Connect the receiver to your TV set through the options of HDMI cable, SCART cable
or a RCA cable.

z Connecting to Digital Audio Amplifier
Connect S/PDIF connector at the back of your receiver to appropriated input of your

Digital Audio

z Connecting to Dish
Aiming a satellite dish and LNB to the correct longitude and Azimuth (angle of elevation)
of a satellite is a specialist job, and best to be done by a professional installer.

<Connecting a fixed satellite dish to your receiver>

Make your choice of which satellite you want to receive your signals from, and have your
installer aim your dish at the requested satellite. For English language channels this will
be Astra 2, Eurobird 1.
Connect an F type coax cable to your LNB and the other end directly to the LNB IN
connector of your receiver.

6

<Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch>

If you want to watch programmes from more than one satellite (For instance from Astra
and from HotBird) it is suggested to use fixed dishes and a DiSEqC 1.0 switch. Have your
installer aim the dishes at the requested satellites and connect the LNBs with coax cables
to the IN connectors of the DiSEqC 1.0 switch. Connect the OUT connector of the
DiSEqC 1.0 switch tothe LNB IN connector at the back of your receiver.

<Connecting a dish on a motorized positioner to your receiver>

Another option to watch programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 positioner.
Have your installer mount the dish to the positioner, set the correct azimuth (angle of
elevation) and let him set the centrepoint for your positioner.
Connect the LNB with a coax cable to the LNB IN connector of the positioner, and
connect the OUT connector of the positioner to the LNB IN connector at the back of your
receiver.

z Turn on your TV, and select correct input.

z Plug the receiver power cord into the 240V/100V AV power socket on the wall.

z Press the “POWER Switch” on the rear panel of the receiver to start. Wait a

moment till the “Lock light” (yellow color) is on. Then press the “POWER” button

on the front panel.