Labgear HDMXPL1 User Manual
HDMXPL1
HDMI Over Powerline Extender Kit
User Guide
®
Thank you for purchasing this product. For optimum performance and safety,
please read the instructions carefully and keep the manual for future reference.
Warning Before Installation Please Note
If this system is used in a property where an existing powerline network is
already running then please turn this o whilst setting up the HDMI
transmitter/receiver. After the receiver is successfully connected to the
transmitter you can then turn the existing powerline adaptors back on.
Important safety precautions
Please read the safety instructions below carefully before installation and operation:
• Please pay attention to all the warnings and hints on this device.
• Do not expose this unit to rain, moisture or other liquids.
• Do not place any objects on top of the transmitter or receiver.
• Do not open the device there are no user serviceable parts.
• Make sure there is plenty of space around the units to ensure there is enough
ventilation to prevent damage from overheating.
• Shut o power and make sure the environment is safe before installation.
• Do not plug or unplug connected cables when in use.
• Keep away from heat sources and direct sunlight.
Introduction
This Powerline extender kit uses the HDbitT transmission protocol, through
existing power cables for the transmission of audio and video signals. This means
that it is unnecessary to run any additional cables and therefore there are no
potential routing problems. The extender also supports full IR remote control
function return.
Features
1) The units use existing mains powerlines to transmit and receive HDMI signals,
and can be plugged in where ever there is an existing mains outlet.
2) Input voltage: 100~240V.
3) The kit can extend signals up to 1080p@60Hz resolution for as far as 300m over
mains circuits with an uninterrupted power supply.
4) Supports IR back channel.
5) Supports HDMI loop output from the transmitter.
6) Manufactured using re resistant raw materials to ensure safety and reliability.
7) Easy setup, plug and play
Loading...