Küppersbusch KD7580.0GE, KD9580.0GE, KD9970.0GE, KD9960.0GE Instructions For Assembly And Use

BEDIENUNGS- UND
MONTAGEANWEISUNG

GB INSTRUCTIONS FOR ASSEMBLY AND USE
GR

   

KD7580.0GE

KD9970.0GE

KD9960.0GE

KD9580.0GE

20

CONTENTS

General
Contents
Your appliance data

Safety Instructions

Installation
Assembly instructions

Electrical connection
Other assembly instructions and tips
Dimensioned drawings
Assembly instructions

Operation
Switching your appliance on / off

Power controls
Automatic delayed stop
Switching the lamp on / off
Dimmer function
Filter saturation display
Remote control

Maintenance, Cleaning and Care
Casing

Grease filter
Charcoal filter

29

32
32
32
32
32
33
33

34
35
36

20
21

22

24
24
25
26

21

Please note:

We require the following details for your request for customer service so that our
customer service technicians can be well-prepared to carry out repairs and have the
required spare parts available:

7. Your exact address

8. Your telephone number and, if available, fax number

9. When can customer service call?

10. An exact appliance designation:
model no. and fabric no. (refer to the nameplate and/or the receipt)

Model designation: ............................................................................................

E-number: ..........................................................................................................

F/N: ..............................................................................................................

11. Date of purchase

12. An exact description of the problem or the kind of service you require

Please also have your receipt available.
This will help us to avoid wasting time as well as cutting down on expenses and we
will be able to work more efficiently for you.

22

Safety Instructions

This appliance complies with valid safety regulations. Improper handling may cause
damage to property and injury to persons.
Please read these instructions carefully before installing your appliance and using it.
It contains important information and tips on assembly, safety and maintenance.

Information concerning structural requirements

The following instructions must be observed when cooker hoods are used in the
extraction mode:

- In kitchens/rooms with no open fireplace, the air supply must ensure that no

negative pressure occurs in the room and that the hood can function properly.

- Important! Kitchens / rooms with an open fireplace, e.g. tile stoves, coal

ovens, fireplaces, etc., must always be provided with a sufficient supply of
fresh air. This is best ensured with a wall box for inlet air and exhaust air or
with a flip switch for the window.
Contact your local chimney sweep for information before making your plans.
He will have to give his approval for the hood and the inlet air and exhaust air
pipes before you put your hood into operation.

- Under no circumstances may the hood be connected to a smoke or exhaust

gas chimney that is used for other appliances (hot water tanks, boilers,
furnaces, etc.). Chimneys used for ventilating rooms or fireplaces may not be
used for the hood.

- Your local chimney sweep must give his approval if the hood is connected to

smoke or exhaust gas chimneys which are no longer in use.

- Valid national building regulations must be observed.

23

Safety instructions for assembly and use

- The metal grease filters must always be in place when the cooker hood is in

operation. Greasy vapours may otherwise be deposited in the hood and in the
extraction air system.

- In the case of gas cookers it is important to ensure that the cooking zones are

not operated without any cookware. Uncovered gas flames may damage
components of the cooker hood as a result of rising heat.

- Never flambé under the cooker hood as there is a risk of fire. The rising flame

could ignite the fat that has been deposited in the filter.

- Constant supervision is essential when deep-frying or cooking with oil or fat

under the hood because of the risk of fire.

- No other work may be carried out with an open flame. A fire may result and

damage the metal grease filter or other parts of the hood. This does not
include the proper use of a gas cooker.

Safety instructions for maintenance, cleaning and care

- Pull the mains plug out of the socket or switch off the relevant safety fuse in

the fuse box for the building when carrying out any maintenance or cleaning
work.

- The cooker hood may not be cleaned with a steam cleaner.

- Grease deposits may cause a fire if the instructions for maintenance and

cleaning are not followed.