Küppersbusch IGV 689.1 Instructions For Use And Installation Instructions
INSTRUCTIONS FOR USE
Instrucciones de Uso e Instrucciones de Montaje
E
IGV 689.1
and installation instructions
152988 11/0
0/0798
For the user
Important safety information 3
Description of the appliance 4
The control panel 5
Before use 7
Setting the water softener 7
Rinse aid 9
Use of detergent 10
Using your appliance 11
Loading your appliance 11
Adjusting the height of the upper basket 12
Hints and tips 13
Washing programmes 14
Operating sequence 15
Maintenance and cleaning 16
Internal cleaning 16
Cleaning the central filter 16
Cleaning the large filter 16
External cleaning 17
Prolonged periods of non-operation 17
Frost precautions 17
Moving the machine 17
Something not working 18
Protection against flooding 19
Service and spare parts 19
For the installer
Installation instruction 20
Technical specifications 20
Water supply connections 21
Water outlet connection 22
Electrical connection 22
Building-in 23
Adjusting the height of
the appliance 23
The furniture door 24
Fitting the vapour protection 25
Fitting the sealing strips to the
sides of the appliance 25
Fixing to the adjacent units 25
Adjusting the door balance 25
Noise protection 26
Kitchen plinth adjustment 26
Contents
2
PCO24GB
Guide to use the instruction book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
1. 2. 3. Step by step instructions
Hints and tips
ENGLISH
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is left with the appliance in order
that the new owner can get to know the functioning of the appliance and the relevant safety
information.
This information has been provided in the interest of safety. You MUST read it carefully before
installing or using the appliance.
Important safety information
3
PSI01GB
Installation
■ This appliance is heavy. Care should be taken
when moving it.
■ It is dangerous to alter the specifications or
attempt to modify this product in any way.
■ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
■ Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
■ Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Child safety
■ This appliance is designed to be operated by
adults.
Children should not be allowed to tamper with
the controls or play with the product.
■ Keep all packaging well away for children.
■ Keep all detergents in a safe place out of
children's reach.
During use
■ Items that are contaminated by petrol, paint,
steel or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this
dishwasher.
■ Under no circumstances should you open the
door whilst the appliance is in operation. Always
turn off the appliance before opening the door.
■ Only use detergent specifically designed for use
in dishwashers.
■ When finishing loading or unloading close the
door, as an open door can be a hazard.
■ Do not sit or stand on the open door.
■ Isolate the appliance from the power supply and
turn off the water supply after use.
■ Care should be taken when cleaning the
bottom door seal and hinge area as any
exposed metal edges may cut if care is not
taken.
■ This product should be serviced by an
authorised Service engineer, and only
genuine spare parts should be used.
■ Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Force Centre.
Always insist on genuine spare parts.
Conservation
In the interest of the environment:
■ Materials marked with the symbol are
recyclable.
■ Check with your local Council or
Environmental Health Office to see if there
are facilities in your area for re-cycling this
appliance.
■ When the appliance is to be scrapped, cut
off the power supply cable and make the
door closing device unusable to prevent
young children from being trapped inside.
■ Help to keep your country tidy - use
authorised disposal sites for your old
appliance.
ENGLISH
Description of the appliance
4
PDA04GB
1
2
3
4
5
6
8
9
10
11
12
IN65
13
7
1. Levelling spacers
2. Upper basket stop
3. Door balancers
4. Salt container
5. Lower spray arm
6. Detergent dispenser
7. Control panel
8. Rating plate
9. Rinse aid dispenser
10. Large filter
11. Central filter
12. Upper spray arm
13. Upper basket
ENGLISH
In this fully integrated appliance the controls are
located on the top of the door. When selecting a
programme, the door needs to be partially opened.
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
"Instruction accepted" short signal
When any of the buttons are pressed: a short
audible signal informs you that the machine has
accepted the instruction given; if no signal is heard
when a button is pressed, this means that a
programme is already running or that the
programme selected does not include this function.
"Programme run" long signal
A continuous audible signal lasting about half
second, heard only when you close the dishwasher
door, informs you that the washing programme is
starting.
"End of programme" intermittent signal
A short intermittent audible signal informs you that
the wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you to determine the cause of any
problems (see "Something not working").
An intermittent audible signal lasting about 15
seconds informs you that an alarm is activated.
If you wish to deactivate these audible signals,
press both "programme selector" and
"economy drying" buttons together for about 3
seconds, until three short signals are heard.
To reactivate the audible signals, press both
buttons together again for about 3 seconds,
until the "instruction accepted" short signal is
heard.
1. "On/Off" pushbutton
Press this button to preset the dishwasher to
accept settings (selection of wash programme,
economy drying, etc.).
The number corresponding to the last
programme selected appears in the digital
display.
When the wash programme has ended, the
dishwasher stops automatically (an intermittent
audible signal informs you of this) and three
flashing horizontal line "---" appear in the digital
display.
To switch off the dishwasher at the end of the
programme, press this button again.
2. Rinse aid refill indicator light
This light illuminates when the rinse aid has run
out, to remind you to refill the rinse aid
dispenser.
The control panel
5
PCP41GB
1 2 3 4 5 6 7 8 9 10
C
SO252
ENGLISH
3. Salt refill indicator light
This light illuminates when the salt has run out, to
remind you to refill the salt container.
4. "Hot prewash" indicator light
This light illuminates when you select a
programme with hot prewash.
5. Digital display
6. "Programme selector" button
To select the required programme, press this
button until the number corresponding to the
chosen programme appears in the digital display
(see "Washing programmes" chart).
7. "Half load" pushbutton
By pressing this button, washing can be
concentrated to a single basket instead of both:
the indicator light corresponding to the basket
selected comes on.
This is very useful and economical when only a
few dishes need washing.
Remember to load all the dishes into the basket
selected.
If both indicator lights are out, washing will be
carried out in both baskets (default setting).
8. "Economy drying" pushbutton
By pressing this button you can opt to shorten or
completely eliminate the drying cycle, so making
a considerable energy saving.
With the programme nr. 1 the drying options are
not available.
If both pilot lights are out, the full drying cycle
will be carried out (default setting).
9. "Delay start" button
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 12 hours.
How to set the "Delay start":
When the button is pressed, in the display
appears "h 00".
Press the button again to select the number of
hours by which you wish to delay the programme
start, up to a maximum of 12.
The delay start will not modify the settings made
previously.
If, during the countdown, you wish to check on
the display the programme selected, press the
"Programme selector" button.
10. “Cancel” pushbutton
If you wish to cancel a programme which is
already running, or the delay start after the
countdown has started, press this button for
about 2 seconds until a short signal is heard: in
the display appears "---" indicating that the
previous setting has been cancelled, then
appears the number of the last programme and
the options selected.
A new programme and/or a new delay start may
be selected.
6
PCP42GB
ENGLISH
Before using your dishwasher for the first time:
1. ensure that the electrical and water
connections comply with the installation
instructions
2. remove all packaging from inside the appliance
3. set the water softener
4. fill the salt container
5. fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the
water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
The higher the content of these salts, the harder
your water is.
Water hardness is measured in equivalent scales,
for example German and French degrees.
The softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness of
the water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener
should be adjusted.
To select a different level proceed as follows:
1. Press the On/Off pushbutton on.
2. Press the "half load" and "economy drying"
buttons simultaneously for about 5 seconds:
the indication "L4" corresponding to the current
level appears in the display.
3. Press the "economy drying" button as many
times as necessary to make the required level
appear in the display. The corresponding pilot
light flashes to indicate that this button must be
pressed. The level increases by 1 each time
the button is pressed.
4. 5 seconds after this button has last been
pressed, the dishwasher memorises the level
selected and returns to the programme setting
mode.
Before use
7
PBU11GB
SO253
Level
French
degrees
(°TH)
PPM
(Parts per
Million)
German
degrees
(°dH)
0
1
2
3
4
5
6
7
8
9
<4
5-8
9-11
12-17
18-22
23-28
29-33
34-39
40-45
46-67
0-8
9-14
15-20
21-30
31-40
41-50
51-60
61-70
71-80
81-120
0-80
81-140
141-200
201-300
301-400
401-500
501-600
601-700
701-800
801-1200
Water hardness
ENGLISH
Filling with salt
If your water is "level 0" it is already soft and
therefore there is no need to use salt.
Salt must be used from level 1 upward.
Only use salt specifically designed for use
in dishwasher.
All other types of salt not specifically
designed for use in dishwasher, specially
table salt, will damage the water softener.
Only fill with salt just before starting one of the
complete washing programmes (not the Rinse and
Hold programme).This will prevent any grains of
salt or salty water, which may have been spilled,
remaining on the bottom of the machine for any
period of time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour about 1 litre of water inside the container,
or until it is full (this is necessary only before
filling with salt for the first time).
3. Then using the funnel provided, pour in the salt
until the container is full (approx. 1.5 - 1.8 kg).
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
5. Screw on the cap tightly.
The salt container will require topping up
periodically.
The "Salt refill" indicator light on the control panel
will illuminate when the salt has finished, and
requires refilling. The salt container has always
some water inside which will normally overflow
when refilling with salt.
The "Salt refill" indicator light can remain
illuminated for 2 - 6 hours after salt has
been replenished, assuming the
dishwasher remains switched on. If you
are using salts that take longer to
dissolve then this can take longer. The
function of the dishwasher is not affected.
8
PFS03GB
SALE
SALT
SALZ
SEL
SR06
ENGLISH
Rinse aid
Rinse aid is automatically added during the last
rinse, ensuring through rinsing, spot and streak
free drying. The dispenser, which is positioned
inside the door, holds about 110 ml of rinse aid,
which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Filling with Rinse Aid:
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator
(B) will be completely dark.
3. Top up the rinse aid when the rinse aid
indicator light on the control panel illuminates.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
department. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess
foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6
position selector (C) (position 1 minimum dosage,
position 6 maximum dosage).
(Start from position 3).
Gradually increase the dose if there are drops of
water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
9
PFR03GB
BR01
A
m
a
x
6
5
4
3
2
1
B
BR03
BR02
C
m
a
x
6
5
4
3
2
1
ENGLISH
Loading...