KZ BROADBAND iSurf 1000 User Manual

iSurf 1000 Multi-Service Home Gateway

User Operation Manual

Version 1.1

KZ BROADBAND TECHNOLOGY Co. Ltd. CONFIDENTIAL

This document and the information contained in it is confidential information of KZ Broadband Technologies Ltd (KZ Tech),

and shall not be used, or publish, or disclosed, or disseminated outside of KZ Tech in whole or in part without KZ Tech’s

consent. This document contains trade secrets of KZ Tech. Reverse engineering of any or all of the information in document

is prohibited. The copyright notice does not imply publication of this document

© COPYRIGHT 2004-2012, KZ Broadband Technology Co. Ltd.

CONFIDENTIAL INFORMATION

Information contained herein is proprietary to KZ Tech for whose benefit

confidentiality shall be maintained.

iSurf 1000 User Operation Manual

1. Packing List

The product is shipped with the following standard accessory and parts. The user should contact the local distributor
if there is any part missing.

Content Quantity

Main System Unit 1
12V DC Power Adapter 1
RJ45 Ethernet Cable 1
Quick User Manual 1
Product Warranty Card 1

2. Introduction

The iSurf

TM

1000 multi-service home gateway is a state of art home gateway
product specially designed to provide integrated broadband services to residential
or SOHO customers. It allows broadband service provider to offer triple play
services (data, VoIP, WiFi) to its residential customers at extremely affordable cost.
The product offers a variety of user networking interfaces including LAN Ethernet
ports, analog phone line ports, master USB port and 802.11n/g/b WiFi interfaces.

User can easily connect multiple PC or LAN devices to the unit via Ethernet or WiFi interfaces while having reliable
VoIP phone service at same time. The USB port pr ovides addition flexibility to connect USB devices such as camer a,
sensor or 3G modem to further expand the service offering.

The iSurf
and most advanced soft DSP processing technologies to
maintain the best performance and cost in home gateway
design. It also provides extensive feature and service
capabilities in data, SIP VoIP and Wi-Fi networking. Its unique
hardware NAT acceleration technique allows the product to
achieve extremely fast data throughputs even in router
operation mode. In addition to the advanced networking
capabilities, iSurf

TM

1000 is developed using single SoC silicon solution

TM

1000 also provides rich management

Phone

Phone
or Fax

or Fax

PC

PC

Set-top boxes

Set-top boxes

Dual Mode

Dual Mode

WiFi Phone

WiFi Phone

Power DC 12V

Power DC 12V

ETH

ETH

iPad

iPad

Notebook

Notebook

Internet

InternetInternet

xDSL/Cable/GEPON

xDSL/Cable/GEPON

interfaces to allow local and remote device management. Its user friendly WEB management interface is well
designed to provide quick installation and setup for user as well as advanced configuration for the device
administrator.

The product detail specification is provided by the below section.

- 2 -

iSurf 1000 User Operation Manual

3. Product Specification

PHYSICAL

Dimensions 135mm (L) x 105mm (W) x 30mm (H)
Weight < 300g
Power < 10 Watts
Power Supply 12V DC

ENVIRONMENTAL

Temperature -10 ℃ - 50 ℃
Humidity 90% maximum Non-condensing
Storage -20℃- 65℃

SYSTEM

Interface 1 10/100M Ethernet WAN Port (RJ45)

802.11n/g/b WiFi (2.4GHz)
3 10/100M Ethernet LAN Ports (RJ45)

2 Analog Phone Ports (RJ11)
1 USB OTG Port (2.0)
System LEDs Power, WAN, WLAN, LAN1-3,

Phone, Voice Mail
Line Distance > 1 km

WIRELESS

Standards IEEE 802.11n, IEEE 802.11g&b
Radio 2.4-2.497GHz (2x2 MIMO)

20dBm ± 1dB per antenna
Antenna Two 3dBi dipole external antennas
Security 64/128 bit WEP encryption
WPA/WPA2/WAPI authentication
WPS (WiFi Protected Setup)
QoS Support WMM, WMM Power Save
Networking Private home networking
Virtual public networking

VOIP PROCESSING

Compression G.711 a
G.711 u
G.729
G.721
Comfort Noise Comfort noise generation and control
Echo Cancellation G.165/G.168-2000 echo cancellation
Silence Suppression Silence detection and suppression
Fax Support T.30 and T.38
Delay/Jitter/Loss Delay, jitter, packet loss compensation
DTMF Relay In-band DTMF, RFC 2833, SIP signal
Call Duration > 48 hours Uninterrupted Call

VOICE SERVICE

Basic Voices

Local and domestic and international long distance calls
Flexible dial plan configuration support
Tone customization for different countries

Complementary Services

Caller ID, Caller ID suppression, Call Screening, Speed
dial, Call Tr acing, Hotline, Unconditional call forwarding,
Call Forwarding No Answer, Call Forwarding on Busy,
Call Waiting, Call Back, Call Blocking, No Disturbance,

Alarm, Network and Local 3-way Call, Data Call, and etc.
Billing Service Support
Z interface polarity reversal

NETWORKING CAPABILITIES

Data Networking

Router and Bridge operation mode support

WAN DHCP or static IP address assignment

L2TP, PPTP and PPPoE client support

DHCP and NAT service for LAN and WiFi devices

SPI Firewall and DMZ support

VPN Pass-through support (PPTP / L2TP / IPSec)

Support for DNS, NTP, TF TP, FTP services

QoS and VLAN management support (coming release)
VoIP Netw orking
Soft switch based network c onfiguration
Device peer to peer networking support

INDUSTRY STANDARDS

IEEE

IEEE 802.3 10Base Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.1p CoS Priority Protocol

IEEE 802.1Q VLAN Tagging
IETF

IP voice SIP v2.0

M

ANAGEMENT

User Management Telnet, Web, Console (debug)
Others FTP Auto Firmware Upgrade

- 3 -

4. Front Panel Description

Table 1 Front Panel LED Specification

LED Function Description

PWR Power supply indicator,

dual color LED

WAN

WiFi WiFi status indicator Green Color – WiFi is enabled and working

WAN port status LED
( dual color)

Orange Color – Device is booting up
Green Color – Device in normal operation

Orange Color – Device WAN port is not yet ready for
normal operation.
Solid Green – Device WAN port is up and ready.
Blinking Green – WAN port data transmission in
progress.

LAN 1-3 LAN port status Solid Green – The LAN port is up

Blinking Green – LAN data transmission in progress

PHONE POTS line status indicator

(dual color)

Voice Mail Indication of the existence

of new voice mail

WPS (Left Side) WPS Service Access Orange Blinking – WPS access is enabled. The

Orange Color – Line hardware problem
Green Blinking – Voice Call in progress
Green Color – The line is ready and registered
OFF – Line is not registered or provisioned.
Green – New voice mail available

procedure can be triggered by pressing the WPS
button.