KYUNGWOO SYSTECH A232A Users Manual

Part No(품번) Name of Product(제품명) Prepared(작성) Reviewed(검토) Approved(승인)
A232 SMART KEY TAG
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
DR-A232 1 / 6
Rev A 2013.03.29
배원식 박승수
Page
CSK 3/29
<Revision History>
Rev Date Page Before Change After Change
2009.10.28
3
A 2013.03.29
First Release
1) T AG Design changes
2) LABEL added
Composition Approval
BWS CSK
Distributed(배포처)
식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
DR-A232 2 / 6
Rev A 2013.03.29
Page
<Contents> Revision History
1. Synopsis
2. Product Image
3. Block Diagram
4. Specification
서식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
1. Synopsis
This document is specifically-written manual for receiver and transmitter (SMART KEY TAG) of wireless communication, which is to confirm user identifications under engine-sta rt limiting function in heavy equipments.
SMART KEY TAG is defined as following: it receives signals with RFID 125 KHz and wakes up. After then, it transmits password-secured information to SMART KEY READER by using 2.4 GHz Zigbee wireless signals.
2. Product Image
1) External Appearance
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
WARNNIG
Exchanging batteries in incorrect way, It may cause explosion
Discard used batteries according to manufacturer’s instructions
DR-A232 3 / 6
Rev A 2013.03.29
Page
2) Dimension
3) Certification LABEL location
Certification LABEL location
서식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
3. Block Diagram
BATT.24V
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
DR-A232 4 / 6
Rev A 2013.03.29
Page
4. Specification
4.1. Operating Specification
-. Must wake up the remote control by providing electricity with RFID 125 KHz.
-. Must be operating with CR2032 battery.
-. Must be able to transfer password-secured signals.
-. Must be able to use all 16 channels with Zigbee band of 2405 to 2480MHz.
4.2. Power Specification
-. 3 V d.c. (CR 2032 Lithium Battery)
-. Notice : Inserting opposite polarity of battery may cause explosion or damage to product (Please match battery polarity with battery holder)
4.3. General Specification
-. Storage Temperature: -20 ~ 70
-. Operating Temperature: -10 ~ 60
-. Water-Proof Specification: IP54 (Living Water-Proof)
-. Material of Device: PC (Flame Class: V0, Manufacturer : SABIC Innovative Plastics)
-. PCB material
object/part No.
manufacturer/
trademark
type/model technical data standard
mark(s) of
conformity1)
SMK TAG B/D PCB
서식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
WOOMYUNG ELEC CO SKD V-0 ; 105 C UL 796 UL
4.4. RF Specification
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
DR-A232 5 / 6
Rev A 2013.03.29
Page
Item Specification
Wireless Data
Communication
System
Operating Frequency 2405 ~ 2480MHz (16 Channals)
RF Power Under 10mW
Modulation Method OQPSK
Tested Temperature
-10 ~ +50
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To comply with RF exposure compliance requirements, the antenna used for this transmitter must not be co­located or operating in conjunction with any other antenna or transmitter.
서식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
Name of document(문서명) Reg. No(문서번호)
Engineering Report Notice
SMART KEY TAG User’s Manual
DR-A232 6 / 6
Rev A 2013.03.29
Page
서식 QP-041-06R(0) ㈜경우시스테크 A4(210x297)
Loading...