Abnormality is detected within
the instrument.
Before starting to use the instrument, perform the following
preliminary check for your safety.
● Check for any abnormalities or damages on the instrument.
● Press button to confirm LED light is turned on.
● Test on a known power supply to ensure the glow tip
illuminates in red and buzzer beeps.
● The red light flashes quickly five times if the batteries need
changing. Replace the old batteries with new ones to perform
further use.
● Self-Function test
This instrument performs self-function test when button is
pressed. When abnormality is found at the test, it gives 3
short beeps, 3 long beeps, 3 short beeps (Morse code for
SOS); the abnormality may be either temporary or
permanent. Such an alert may be given when pressing the
button while the instrument is sensing voltage. Stop using the
instrument if buzzer produces SOS Morse code sound and
verify proper operation on a known power supply.
Kyoritsu reserves the rights to change specifications or
designs described in this manual without notice and
without obligations.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
05-16
Loading...