Air Purifier
User Manual
Model No:EL-5 00L
Thank yo u for p urchasi ng ou r product s. Be fore oper ati on, pleas e
read thi s man ual thoro ugh ly and reta in fo r future re fer ence.
IMPORTANT SAFEGUARDS:
Before using an electrical pr oduct, basic safety precautions sh ould
always be observed, including the following:
WARNING
– To reduce the risk of electric shock, fire or injury to persons:
1. Recommend to use individual electric s upply socket and not to use
an extension sock et, in order to av oid t he danger of overheating in the
outlet. Using inappropriate voltage and power outlet will damage and
harm others.
2. Do not place the electrical cord under cover. Place the cord in an
area where there are no any risks to stumble over.
3. Place the product on a flat, firm and safety place. Do n ot put it on
the table e dge or on tilted are a, in order to avoid dropping or damaging
the product accidentally.
4. Unpack all pl astic bags of the filter s before the p roduct for the first
time. Always check whether all the filter s are mo unted correctly before
using the product.
5. Always switch off the product before attempting to open the back
cover and take the filter.
6. Do not block the air inlet and outlet to avoid damage du e to
overheating. Keep 30cm away f rom pr oduct and keep away from soft
objects such as curtains.
7. To avoid shortening life span or dama ging your prod uct, do not u se
the machine with parts or accessories that are not original. O therwis e,
warranty of the product will go invalid.
8. Never oper ate the product without supervision. Children should be
supervised by a re sponsib le adult to ensure that they do not play with
the product.
9. Do no t put your fingers or other o bjects into the ai r outlet, to avoid
injury and damage the product.
10. Periodically check the electric cable of the product. If the ele ctric
cable is damaged, it must be replaced by after-sales service in order t o
1
avoid danger.
11. This produc t is not designed for outdoor use nor at humidity area
such as bathroom. It is designed for indoor use only.
12. Do not operate the product in area whe re gasoline, painting or
flammable liqu ids are arou nd. Keep the product awa y from heat or ho t
units, as it may cause explosion.
13. Only use this product as described in this manual.
14. Do not attemp t to fix the prod uct on your own wh en it is not
functioning. There a re no u ser serviceable parts in yourappliance.
Unauthorised dismantling or servicingwill void the produc t warranty.If
you need main tenance , please send it back to the service centre for
assistance.
15. When unplugging the power cord, hold th e plugtop, not the powe r
cord.
16. This product is no t intended to use by persons (incl uding children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given super visiono r
instruction concern ing use of the appliance by a person responsible for
their safety.
17. Before cleaning, repairing or moving the product, you must unplug
it. Do not use vo latile liqu ids or hard cloth to clean the produ ct, as to
prevent the product from scratching.
18. Do n ot immerse th e a ppliance or t he electrical cordor plug in
liquids.
19. When the product is not using, pack it back in the giftbox an d store
it in a safe, cool and dry place that avoid direct sunlight.
20. Unplug the appliance from the mains supplywhen not in use, or
before cleaning any part of theappliance.
21. This appliance is for household use only.
CONTENTS
Parts De scription ……………………… …… ……………..…… …… …4
How to use …………………………….……………………………… 5-9
Remote Control Operati on Instruction……………………….….10-12
Cleaning& Maintenance…………..………………………………..13-14
Troubleshooting…………………… …… …… …… …… ……………….15
Specificati on……………………… ………………………………………16
After-sales Service……………………………………………………….16
2
3
Ⅰ PARTS DESCRIPTION
Ⅱ HOW TO USE
5
6
1
1. Front panel
2. Filter
3. Dust sensor
4. Display indicator
5. Power on/off switch
6. Air out
4
3
2
10
9
7. Handle
8. Speed switch
9. Voc sensor
10. Filter ON/OFF
11. Filter lifting bracket
7
8
3
ICON
INSTRUCTIONS
Power on/off switch
Speed setting / 3seconds to set kid lock/10seconds to
set magic switch
+
ICON ICON
press both of them to reset filter timer
INSTRUCTIONS INSTRUCTIONS
Timer
Ion
Filter exchange alert
Auto mode
PM 2.5 display
VOC diaplay
CO alert
2
High Speed
Air quality display
4
5
Attention: The product will not operate until the front cover is closed
properly.
1. Remov e all the packing before use to avoid blocking the p roduct to
operate.When using the produ ct for the first time, please fol low the
Chapter Ⅴ. Take out the front cover and rem ove all the plastic bags and
install all th e filters according to the ir cor rect sequence. Do not oper ate
the unit without any filters.
2. Place the product on a firm, flat and safe ar ea, and reserve at least
30cm distance from the wall for the pr oduct operate normally and
cooling down. Afterwards, plug in the product to the power socket and
keep it away from soft objects such as curtains.
3. Norma l plug in, the buzzer sounds. Ind icator light dim, air purifie r
enters into standby status. sensors starts work.
4. Two ways to Power on/off.
a) Touch the power button to turn on or turn off the unit,
5. Kid lock function
On switch on mode, press the spee d button for 3 seconds with out
loosen finger, t he buzzer sounds, the unit enters into kid lock mode. The
switch on/off indicator light flashing, 0.5seconds on and 0.5seconds off
by tur n. At the same time, all button of remote control f ailed in o peratio n
except power on /off switch. Release kid lock: press the speed button for
3 seconds without loo sen finger again to release, switch on/off indica tor
lights on normally.
6. Filter restart function
Touch the powe r on/off -switch and fan speed button for 3seconds
together wi thout loosen finger, the buzzer sounds, then clean up filter
accumulative time, filter restart light flashing, open t he panel to reset
filter.
b) Hand through the power on/off swi tch lightly by keeping 5-10 cm
isolation, the unit enters into the default functions, auto mode starts(
Letter "A" displayed in the middle of 888 indicator), turn to 1st speed,
negativ e io nizer, PM2.5 sensor, VO C sens or sta rt work, filte r
accumulative time working; Indicator light icons are: Power indi cator
light on, negative i on, PM2.5 value displayed. Hand through the power
on/off switch lightl y by keeping 5-10 cm isolation aga in, all function stop
working except WIFI function , the unit enters into standby mode, the
power indicator lights dim, make it cycle like this.
6
7. Filter cumulativetime counting
Next time switch on the unit, continue to calculate filter time, after
2000hours using (<0. 5 is seen as 0.5 hour, <1 hour is seen as 1hour.) ,
the filter indicator light 0.3 second on t hen 0.3 s econds o ff, in dicate the
user to replace the filter.
8. Speed button
Press speed button by han d, the s peed displayed in th e middle of 888,
Press the button by turn , it turns to 123AUTO. When speed fixed, it wil l
be displayed for 5 seconds, and will turn to display PM2.5 va lue and
VOC automatically after 5 second s, if user want to check the curr ent
speed, press the s peed b utton, and the current speed will be cha nged if
press speed button a gain. Exit f rom the hand mode state: just press t he
Auto button or sleep button or fast removal button to exit.
7
9. Digital tube display
Touch t he power-on/off switch, PM2.5 indicator lights on, PM2.5 value
displayed, after 5 seconds t he TVOC indicator ligh ts on, TVOC val ue
displayed.take turns alternately every 5 seconds.
PM 2.5 display:
10. How to know the quantity of CO2 in your room ?
will displ ay ora nge color and blink me ans CO2 quantity more than
2000ppm , you need to open your window.
11. Optical sensing light auto on/off
When in dark light environment, t he unit enters into sleep mode,
indicator lights dim. When in bright ligh tenviro nment,t he unit rever ts to
previous mode.
VOC diaplay
PM2.5
Good
Fine
Dirty
VOC
Good
Fine
Dirty
DISPLAY
000-075
076-150
>150
<0.60
0.61-1.00
>1.00
8
COLOR
Green
Yellow
Red
COLOR
Green
Yellow
Red
SPEEDDISPLAY
1
2
3
SPEEDDISPLAY DISPLAY
1
2
3
9
Ⅲ REMOTE CONTROL OPERATION INSTRUCTION
POWER
AUTO
ION
LIGHTS OFF
SLEEP
HIGH SPEED
KID LOCK
TIMER
SPEED
1) Power-switch: Press pow er-switch for power on, press it again for
power off, make it cycle like this.
2) High speed button: Press high speed button, the uni t ente rs into
high speed mode , " H" is displayed on the m iddle of 888 for 5 secon ds,
and it will display PM2.5 value by turn after 5 seconds. Pre ss high
speed b utton again to exit and the unit enters into a uto mode ins tead,
"A" is displayed on the middle of 888.
3) Speed button: Press speed button, the speed displayed in the
middle of 888, Press the button by turn, it turns t o 123AUTO. When
speed fixed, it will be dis played for 5 s econds, and will turn into PM2.5
value and VOC di splay automatically after 5 seconds, i f user want t o
check the current speed, press the speed bu tton, and the current speed
can be cha nged if press speed button again. Quit from the hand mode
state: just press the Auto button or sleep button or fast removal button.
4) Sleep button: Press sleep button, the unit enters into sleep mode,
the power light dim, al l other lights off, buzzer turns off, a ll keys are
failed in ope ration except power-on switch and sleep button when in
sleep mode. Press the button again,E xit from sleep mod e, the unit
enters into auto mode.
5) Timer button: Press ti mer button to timing shutdown function, 024hours are avail able to be timer, Countdown tim e by hours displayed
on the machine.
6) Kid lock function: Press the ki d lock button, the buz zer sounds, the
unit enters into kid lock mode. The power-switch ligh t f lashing ,
0.5seconds on and 0.5seconds off by turn. At the same time, all button
of remote control failed in operat ion e xcept power switch. Release kid
lock, press the kid lock butto n again to release, switc h on/off indicator
lights on normally.
7) Negative ion button: Press it to turn offion function, negativ e ion
indicator lights off, press it again, negative ion starts work, lights on.
8) AUTO button: P ress Smart button, the unit enters in to smart mode,
10
11
Ⅳ CLEANING& MAINTENANCE
press it again to exit, the unit enters into manual mode.
9) lights off button: Press it, all indictor lights turn off, only poweron/off switch lights dim, press it again to exit.
Warning:
- Always unplug the product before cleaning, maintaining or moving it.
- Do not immerse the power cord, plug or the whole product in water.
- Caution - Do no t use detergent, gasoline, benzene, thinner, or other
solvents to clean the product to avoid damage of the product.
- It is recommended to clean the product and to replace it with new
filters regularly for best air purifying performance.
- Switch off the produ ct bef ore maintaining it. Remove the plug from the
socket, and wait for 15 min for the fan to stop running
- Remove the filters from the product as below.
1. Take out the front cover
Both hands index finger gently press the arrow position and gently to
the outside force, to lift the front panel.
12
2. Exchange filter
- After that, Drag the fixed switch of the filter to the lef t slide to un lock,
remove the filter to replace.
- t he HEPA filt er should be replaced after using for 6 to 12 months, and
the replacing time varies upon the using environment.
- The pr oduct surface can be cleaned by damp c loth and dry up before
use.
13
3. Install front panel
- D ry up all the filters before assemble back to pro duct and stora ge.
Please install the filters and front cover into sequence as per
instruction. The bottom thre e buttons are aligned with the card slot, and
the panel is pushed forward to fix the front panel.
Ⅴ TROUBLE SHOOTING
When the product failure, please refer to the below troubleshooting
method. If the faulty problems are out of below scopes, please do not
attempt to repa ir the product, bring it back to the serv ice providers to
check and repair.
Problems
1. Air Purifier cannot operate.
2. Air purification capacity decrease.
3. The product has abnormal phenomena, like making weird noise, bad
smells, too hot to touch, giving out smoke and etc.
Possible Causes
1.1. The safety device will not be activated if the front cover had not
been mounted properly.
1.2. Check the connection of power supply if it is well connected.
2.1. The filters are dirty.
2.2. The lifespan of the filters are over.
3.1. The product may have been overwhelming for long operating hours
or the air outlet is being blocked.
14
Possible Solutions
1.1.1. Switch off the product, and remount the front cover. Then refer the
Chapter “How to use” to install.
1.2.1. Please connect power supply according to the “How to use”
Chapter.
2.1.1. C lean the fil ters acc ord ing to t he “ Cle ani ng” Chap ter.
2.2.1. Replace the filters.
3.1.1. Switch off the product immediately and unplug from the socket.
Then bring the product to the service centre for checking.
15
Ⅵ SPECIFICATION
Model No : EL-500L
Rated Voltage/frequency: AC220-240V/50Hz
Rated Power: 55W
Net Weight: 8.8kg
Gross Weight: 10.2kg
CADR(Smoke): 280CFM
Dimension: 305*306*724mm
Ⅶ AFTER-SALES SERVICE
Customer Appliances Service Limited
Eindec Singapore Pte Ltd
Tel: 1311 (Monday to Friday 9AM-5pm)
16
Loading...