Kyocera LINGO User Guide
Lingo / M1000 Generic User Guide
This manual is based on the production version of
the Kyocera Lingo / M1000 phone. Software
changes may have occurred after this printing.
Kyocera reserves the right to make changes in
technical and product specifications without prior
notice. The products and equipment described in
this documentation are manufactured under license
from QUALCOMM Incorporated under one or more
of the following U.S. patents:
4,901,307 5,109,390 5,267,262 5,416,797 5,506,865
5,544,196 5,657,420 5,101,501 5,267,261 5,414,796
5,504,773 5,535,239 5,600,754 5,778,338 5,228,054
5,337,338 5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
The Kyocera Wireless Corp. (“KWC”) products
described in this manual may include copyrighted
KWC and third party software stored in
semiconductor memories or other media. Laws in
the United States and other countries preserve for
KWC and third party software providers certain
exclusive rights for copyrighted software, such as
the exclusive rights to distribute or reproduce the
copyrighted software. Accordingly, any copyrighted
software contained in the KWC products may not
be modified, reverse engineered, distributed or
reproduced in any manner not permitted by law.
Furthermore, the purchase of the KWC products
shall not be deemed to grant—either directly or by
implication, estoppel, or otherwise—any license
under the copyrights, patents, or patent
applications of KWC or any third party software
provider, except for the normal, non-exclusive
royalty-free license to use that arises by operation
of law in the sale of a product.
Kyocera is a registered trademark of Kyocera
Corporation. Brick Attack and Race 21 are
trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of
QUALCOMM Incorporated.
Openwave is a trademark of Openwave Systems
Incorporated. eZiText is a registered trademark of
Zi Corporation. TransFlash is a trademark of
SanDisk Corporation. Bluetooth trademarks are
owned by Bluetooth SIG, Inc. and used by Kyocera
Wireless Corp. under license.
All other trademarks are the property of their
respective owners.
Copyright © 2007, 2008 Kyocera Wireless Corp.
All rights reserved.
Ringer Tones Copyright © 2000-2008
Kyocera Wireless Corp.
Bluetooth® Certification
For information about Lingo / M1000 Bluetooth
Certification visit the Bluetooth Qualification
Program Web site at
qualweb.bluetooth.org.
82-G1934-1EN, Rev. 001
FCC notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation. To maintain compliance with
FCC RF exposure guidelines, if you wear a handset
on your body, use the Kyocera Wireless Corp.
(KWC) supplied and approved universal pouch
CV90-61344-03.
Other accessories used with this device for
body-worn operations must not contain any metallic
components and must provide at least 15mm
separation distance including the antenna and the
user’s body.
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES
.
ii
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the network.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified by the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model
phone is on file with the FCC and can be found
under the Display Grant section
http://www.fcc.gov/oet/ea/ after searching on the
FCC ID: OVFKWC-M1000-2X0.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
www.wow-com.com.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Caution
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines in this guide to learn how to
optimize the performance and life of your phone
and battery.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
User Guide iii
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
• Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals and
health care facilities may be using equipment that is
sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any
facility when posted notices require you to do so.
Aircraft—FCC regulations prohibit using your
phone on a plane that is in the air. Turn your
phone off or switch it to Airplane Mode before
boarding aircraft.
iv
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as
propane or butane
• areas where the air contains chemicals or
particles such as grain, dust, or metal powders
• any other area where you would normally be
advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid dropping,
hitting, bending, or sitting on the phone.
Keep phone dry
Keep the phone dry. Damage can result if the
phone gets wet. Water damage is not covered
under warranty.
Resetting the phone
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by
completing the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S.
and international standards bodies in the
following reports:
• ANSI C95.1 (American National Standards
Institute, 1992)
• NCRP Report 86 (National Council on
Radiation Protection and Measurements, 1986)
• ICNIRP (International Commission on Non-
Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Hearing Aid Compatibility (HAC)
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference noise,
and phones also vary in the amount of interference
they generate.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees and results will vary
depending on the user’s hearing device and
hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the
phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the
two ratings.
T-Ratings—Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
User Guide v
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
Battery and charger specifications
Charger Input Output
CE90-R2233 100-240 VAC / 50/60 Hz 5V 350mA
CV90-G2926 100-240 VAC / 50/60 Hz 4.5V 1.2A
CV90-K0281 100-240 VAC / 50/60 Hz 4.5V 600mA
Standard Battery (5mm):
CV90-N3344 3.7V / 900 mAh
Kyocera Wireless Corp.
10300 Campus Point Drive
San Diego, CA 92121 USA
www.kyocera-wireless.com
To purchase accessories, visit
www.kyocera-wireless.com/store
vi
TABLE OF CONTENTS
1 Getting started . . . . . . . . . . . . . . . . . . . . . . 1
Phone battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Phone overview . . . . . . . . . . . . . . . . . . . . . . . . . .3
Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Basic navigation. . . . . . . . . . . . . . . . . . . . . . . . .11
Guide conventions . . . . . . . . . . . . . . . . . . . . . . .11
2 Basic functions . . . . . . . . . . . . . . . . . . . . 12
Powering up. . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Making phone calls . . . . . . . . . . . . . . . . . . . . . .12
Answering phone calls . . . . . . . . . . . . . . . . . . . .12
Ending phone calls. . . . . . . . . . . . . . . . . . . . . . .13
Verifying your phone number. . . . . . . . . . . . . . .13
Activating voice dialing. . . . . . . . . . . . . . . . . . . .13
Taking a picture. . . . . . . . . . . . . . . . . . . . . . . . .13
Using custom menu . . . . . . . . . . . . . . . . . . . . . .13
3 Call features . . . . . . . . . . . . . . . . . . . . . . . 14
Volume control . . . . . . . . . . . . . . . . . . . . . . . . .14
Hold Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
1-Touch Dialing. . . . . . . . . . . . . . . . . . . . . . . . .14
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Data and fax calls. . . . . . . . . . . . . . . . . . . . . . . .15
Roaming calls . . . . . . . . . . . . . . . . . . . . . . . . . .15
Emergency services . . . . . . . . . . . . . . . . . . . . . .16
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . .16
4 Text entry . . . . . . . . . . . . . . . . . . . . . . . . . 17
QWERTY keypad . . . . . . . . . . . . . . . . . . . . . . . .17
Number keypad . . . . . . . . . . . . . . . . . . . . . . . . .20
5 BREW Apps . . . . . . . . . . . . . . . . . . . . . . . 23
Using BREW Apps. . . . . . . . . . . . . . . . . . . . . . . .23
Downloading an application. . . . . . . . . . . . . . . .23
Opening an application . . . . . . . . . . . . . . . . . . .24
Viewing application details. . . . . . . . . . . . . . . . .24
Removing an application . . . . . . . . . . . . . . . . . .24
Disabling an application . . . . . . . . . . . . . . . . . .24
Checking available memory . . . . . . . . . . . . . . . .24
6 Web Browser . . . . . . . . . . . . . . . . . . . . . . 25
Launching Web Browser . . . . . . . . . . . . . . . . . .25
Using Web menu options . . . . . . . . . . . . . . . . . .25
Searching for Web site. . . . . . . . . . . . . . . . . . . . 26
Using bookmark . . . . . . . . . . . . . . . . . . . . . . . .26
Checking Browser Alerts . . . . . . . . . . . . . . . . . .26
Web Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
7 Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 27
Call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
8 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing contacts list. . . . . . . . . . . . . . . . . . . . . .29
Adding contacts . . . . . . . . . . . . . . . . . . . . . . . . .29
Working with contacts . . . . . . . . . . . . . . . . . . . .30
Searching contacts. . . . . . . . . . . . . . . . . . . . . . .33
9 Messages . . . . . . . . . . . . . . . . . . . . . . . . . 34
Text messages . . . . . . . . . . . . . . . . . . . . . . . . . .34
Multimedia messages. . . . . . . . . . . . . . . . . . . . .36
Erasing messages. . . . . . . . . . . . . . . . . . . . . . . .38
Working with messages . . . . . . . . . . . . . . . . . . . 39
Creating group lists . . . . . . . . . . . . . . . . . . . . . .40
Message settings . . . . . . . . . . . . . . . . . . . . . . . .41
10 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Taking a picture. . . . . . . . . . . . . . . . . . . . . . . . .44
Camera mode options . . . . . . . . . . . . . . . . . . . .44
Camera indicators and icons . . . . . . . . . . . . . . .45
11 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 46
Accessing folders. . . . . . . . . . . . . . . . . . . . . . . .46
Browsing camera pictures . . . . . . . . . . . . . . . . .46
Browsing images . . . . . . . . . . . . . . . . . . . . . . . . 47
Browsing sounds . . . . . . . . . . . . . . . . . . . . . . . .47
Playback tools . . . . . . . . . . . . . . . . . . . . . . . . . .47
User Guide vii
12 Tools & Games. . . . . . . . . . . . . . . . . . . . . 48
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Race 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
13 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Menu options . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
My Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
14 Bluetooth® Wireless Technology . . . . . . 67
Turning Bluetooth on . . . . . . . . . . . . . . . . . . . . 67
Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Using Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . 68
Bluetooth settings . . . . . . . . . . . . . . . . . . . . . . . 68
15 Voice recognition. . . . . . . . . . . . . . . . . . . 69
Voice dial list . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . 69
Voice Command Settings. . . . . . . . . . . . . . . . . . 70
16 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 71
Customer Support. . . . . . . . . . . . . . . . . . . . . . . 71
Qualified service . . . . . . . . . . . . . . . . . . . . . . . . 71
Phone accessories. . . . . . . . . . . . . . . . . . . . . . . 72
Product evaluation . . . . . . . . . . . . . . . . . . . . . . 72
17 Consumer Limited Warranty. . . . . . . . . . 73
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
viii
1GETTING STARTED
Phone battery
Installing the battery
To install the battery:
1. Hold the phone
face down and locate
the screw on the
back cover.
2. Turn the screw to set
the screw slot in
vertical position to
unlock the back cover.
3. Locate the groove on
the left side of the
phone and unsnap the
hooks to remove the
back cover.
4. Place the battery in the
phone casing with the
metal contacts of the
battery touching those
of the phone.
5. Replace the back
cover by sliding the
notches into the
opening on the
left side.
6. Snap the back panel
into place.
User Guide 1
7. Set the screw slot in
horizontal position to
lock the back cover.
Note: To remove the battery,
make sure the phone is
powered off.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter
to the jack on the bottom
of the phone. Do not
force the AC adapter into
the jack.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (animated icon)
• Partially charged
• Fully charged
Warning: The battery does not charge if you use
the phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Battery care
General safety guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.
• Do not attempt to insert foreign objects into
the battery.
• Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
• Always keep the battery between 15°C and
25°C (59°F and 77°F). Do not expose the
battery to extremes of temperature, fire, or
other hazards such as a cooking surface, iron,
or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about
whether a charger is qualified, contact
customer support.
• Do not short-circuit the battery or allow
metallic conductive objects—such as
keys, coins, or jewelry—to contact the
battery’s terminals.
2 Phone battery
• Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
• Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
• Improper battery use may result in fire,
explosion, or other hazard.
Common causes of battery drain
• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating in digital mode when far away from
a base station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.
• Extensive use of flashlight option.
Phone overview
Getting to know your phone
The phone has two keypads—the number keypad and the QWERTY keypad.
Number keypad
1. External screen.
2. External Camera key activates camera mode.
3. Volume key to raise or lower speaker volume.
4. Navigation key scrolls through lists and text entry
fields and accesses shortcuts from the home screen.
5. Left softkey accesses menus and functions.
6.
Speakerphone key activates the speakerphone and
answers incoming calls.
7.
Send/Talk key starts or answers a call. Press once to
activate voice command, twice to display the All Calls
list, and three times to redial the last number dialed.
Press and hold to access voice dial.
8. External number keypad for entering numbers, letters,
or symbols.
9.
* Shift key changes the text mode in text entry.
10. Jack for AC adapter (included) and data cable
(sold separately).
User Guide 3
Number keypad continued
11. External speaker.
12. Indicator light shows missed alert when in red or
incoming call when in green.
13.
OK key selects a menu item or option.
14. Right softkey accesses the contacts list and other
menu options.
15.
Back key erases characters in text entry and returns
you to the previous screen.
16.
End/Power key turns the phone on and off, ends a
call or browser session, and returns you to the
home screen.
17.
# Space key enters a space during text entry. Press and
hold to activate or deactivate Silent mode.
18. Jack for hands-free headset only (sold separately).
19.
0 Next key cycles through word choices during
text entry.
Warning: Inserting an accessory into the incorrect jack
damages the phone.
4 Phone overview
QWERTY keypad
When the flip is open, use the QWERTY keypad to enter numbers, letters and symbols.
1. Internal screen.
2. Internal speaker.
3. Navigation key scrolls through lists
and text entry fields and accesses
shortcuts from the home screen.
4. Left softkey accesses menus
and functions.
5.
Send/Talk key starts or answers a call.
Press once to activate voice command,
twice to display the All Calls list, and
three times to redial the last number
dialed. Press and hold to access
voice dial.
6. Internal
Camera key activates camera mode.
7. Messages key accesses the Messages menu.
8. Symbol key allows you to type symbol characters.
9.
Shift key changes the text mode in text entry.
10. Space key enters a space during text entry.
11. OK key selects a menu item or option.
12. Right softkey accesses the contacts list and other menu options.
13. End/Power key turns the phone on and off, ends a call or browser session, and returns you to the
home screen.
14.
Speakerphone key activates the speakerphone and answers incoming calls.
15. Back key erases characters in text entry and returns you to the previous screen.
16. Enter key allows you to enter hard returns.
User Guide 5
Back cover
1. Accessory eyelet (for optional straps and lanyards).
2. Camera flash and flash light.
3. Camera lens.
4. Back cover lock in unlocked status (If locked, the
screw slot is in horizontal position).
6 Phone overview
Common keys
The following keys are pressed frequently when you use your phone. Throughout this user guide, these
keys are referred as follows:
Navigation key
OK key
Left softkey (number keypad)
Left softkey (QWERTY keypad)
Right softkey (number keypad)
Right softkey (QWERTY keypad)
Talk/Send key (number keypad)
Talk/Send key (QWERTY keypad)
End/Power key (number keypad)
End/Power key (QWERTY keypad)
Back key (number keypad)
Back key (QWERTY keypad)
Speakerphone key (number keypad)
Speakerphone key (QWERTY keypad)
Camera key (QWERTY keypad)
Messages key (QWERTY keypad)
Symbol key (QWERTY keypad)
Shift key (QWERTY keypad)
User Guide 7
Screen icons
These icons may appear on your phone’s screen.
The phone is operating in IS95 digital mode.
You have a text message.
The phone is receiving a signal. You can make
and receive calls. Fewer bars indicate a
weaker signal.
A call is in progress.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is DRM protected.
The phone is roaming outside of its home
service area.
High-speed (3G) data service is available and
active on your phone. Check with your service
provider for availability.
(blinking) The phone is sending
high-speed data.
(blinking) The phone is receiving
high-speed data.
High-speed data service is available, but the
phone is dormant.
The alarm clock is set.
The phone is in privacy mode or is accessing a
secure Web site.
8 Phone overview
You have a voice message.
New voice and text message.
New photo message.
New photo and voice message.
New photo and text message.
New photo, voice and text message.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is set to light up instead of ring.
The phone is set to vibrate or to vibrate and
then ring.
Position location is set to your service provider
and to emergency services.
Position location is set to emergency
services only.
The phone is in camera mode.
Camera flash mode is ready.
Screen icons continued
Camera zoom mode is ready.
Speakerphone is on.
Auto-Answer is on.
Bluetooth wireless technology is
enabled (On).
Bluetooth wireless technology is disabled
(Off).
User Guide 9
Main menu
The contents of the main menu are as follows:
BREW Apps
MobileShop
Settings
Help
Web Browser
Launches the Browser
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls Timer
All Calls Timer
Contacts
View All
Add New
View Groups
Speed Dial List
Voice Dial List
Messages
New Text Msg
New Picture Msg
Voicemail
Inbox
Browser Alerts
Sent
Outbox
Saved
Drafts
Msg Settings
Group Lists
Erase Messages
Camera
Launches the Camera
Media Galley
Camera Pictures
Images
Sounds
Tools & Games
Brick Attack
Race 21™
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
Flashlight
Note: The menu items on your phone can change depending on the services provided.
Check with your service provider.
Settings
Sounds
Alerts
Display
My Phone
Accessories
Network
Security
Bluetooth
On/Off
My Devices
Settings
Phone Info
Build Info
Icon Keys
10 Main menu
Basic navigation
You press your phone keys to access the various
menus and other features of your phone. Some of
the basic frequently used keys are as follows:
•
Left softkey: Selects items that appear on the
lower left of the display. At the home screen,
you can select
•
Right softkey: Selects items that appear on
the lower right of the display. At the home
screen, you can select
•
Navigation key: Scrolls through menus and
options. You can access the following
shortcuts from the home screen.
– Press and hold left to launch
Web Browser.
– Press and hold right to record a
voice memo.
– Press and hold up to access the
custom menu.
– Press and hold down to view recent
calls list.
•
OK key: Selects a menu item.
•
Back key: Returns to the previous menu level.
•
End/Power key: Returns to the home screen.
Menu.
Contacts.
Guide conventions
In this guide the following conventions are used
when describing phone features.
Select means to press the left or right softkey, or
the
OK key to select an item on the display. For
example, “select
softkey at the home screen to access the
main menu.
Press means to press a phone key. For example,
“press the
you to press the
Scroll means to press the Navigation key to move
though a list on the display. For example, “scroll
through your contacts list to choose a contact”
means to press the
scroll through the list on the display.
The greater than symbol “>” tells you to select an
option from a menu or list. For example,
Settings means to:
1. Press the left softkey at the home screen to
select
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
Menu” tells you to press the left
Send key to make a phone call” tells
Send key on your phone.
Navigation key up or down to
Menu >
Menu.
User Guide 11
2BASIC FUNCTIONS
This section explains the basic functionality of
your phone. For more detailed explanation of
your phone’s features please refer to the
later chapters.
Powering up
To turn on your phone, press and hold the End
key and wait until the phone display lights up. To
turn off your phone, press and hold the
until the phone turns off.
End key
Making phone calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a while with no
signal, it changes to power save mode. When you
see “Power Save” on your phone’s screen, press
any key to return to normal operating mode.
You can make a phone call in one of the
following ways.
Call using a number
At the home screen:
1. Enter a phone number.
2. Press the Send key.
Call using a contact
At the home screen:
1. Select Contacts to open your contacts list.
2. Highlight a contact and press the Send key.
Call using voice commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
recognition” on page 69.
Redial a number
At the home screen:
1. Press the Send key twice to open your
call history.
2. Highlight a phone number or contact and
press the
Send key.
Tip: To redial the last number called, received or
missed, press the
Send key three times.
Answering phone calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your contacts list, the contact
name appears.
You can answer a phone call in one of the
following ways.
12 Powering up
Answer using earpiece
Press the Send key.
Answer using speakerphone
Press the Speakerphone key.
Answer using flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls.
See “Open to answer” on page 59.
Ending phone calls
Press the End key.
Verifying your phone number
To verify your phone number, select Menu >
Phone Info > Build Info.
Activating voice dialing
At the home screen:
1. Press the Send key once.
2. Follow the prompts.
For more information, see “Voice recognition” on
page 69.
Taking a picture
At the home screen:
1. Press and hold the Camera key to start
the camera.
2. Focus on the image and select
For more information, see “Camera” on page 44.
Capture.
Using custom menu
You can use the custom menu to quickly access
your frequently used functions.
1. At the home screen, press and hold the up
Navigation key to access the custom menu.
2. Select
3. Scroll through the list of options and press
4. Select
5. Scroll through the list of your selected
Edit.
OK to select your desired option(s). A check
mark appears next to each selected option.
(You can press
check marks.)
option(s). Your selected options appear in
the custom menu.
functions in the custom menu and press
to access your desired one.
OK again to remove
Save after checking all your desired
OK
User Guide 13
3CALL FEATURES
This chapter describes call features such as
volume, holding calls, speed dialing and
other features.
Volume control
You have several ways to control the volume of
your phone.
Adjust volume during a call
To adjust the earpiece volume during a call, press
the
Volume key up or down.
Use the speakerphone
Your phone has a built-in speakerphone. To
turn on the speakerphone, press the
Speakerphone key.
The speakerphone icon appears on the home
screen when the speakerphone is on.
To turn off the speakerphone, press the
Speakerphone key.
Note: If you press the
an incoming call, you answer the call.
Silence an incoming call
To silence the phone without answering the call,
press the
End key or select Silence.
To silence the phone and answer the call, press
the
End key and then press the Send key.
Speakerphone key during
Note: In the absence of voicemail, this feature
drops the call.
Hold Calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them. See “Hold Call” on page 59.
Speed dial
Use the speed dial feature to assign a one- or twodigit shortcut to a contact. Before you can use
speed dialing, you must save a phone number as a
contact and assign a speed dial location to it. See
“Contact number” on page 30.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed
dial location.
2. Press the
Send key.
1-Touch Dialing
The 1-touch dialing feature is the fastest way to
speed dial a contact that has a speed dial location.
See “1-Touch Dialing” on page 60.
14 Volume control
Voicemail
Configure your voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
1. With 1-touch dialing enabled, press and hold
the
1 key.
2. Follow the system prompts to create a
password and record a greeting.
Check voicemail
When a voice message is received, your screen
displays “New Messages” along with the symbol at
the top of your screen. The symbol flashes if the
message is urgent. If you see “New Messages”:
1. Select
2. Follow the system prompts to retrieve
Note: To clear the screen without checking
messages, select
If you see only the voicemail message icon:
1. Select Menu > Messages > Voicema il.
2. If you have set up your voicemail, select Call
Call, which initiates a call to your
voicemail number.
the message.
Ignore.
to call your voicemail number.
3. Follow the system prompts to retrieve
the message.
Set voicemail alert
You can set the phone to beep or vibrate every five
minutes to remind you that you have voicemail.
See “Alerts” on page 41.
Data and fax calls
Your phone may be able to receive certain data or
faxes. See “Data and fax calls” on page 63.
Roaming calls
Set roaming alert
You can set roaming alert if you want the phone to
alert you when you roam outside of your home
service area. See “Roaming alert” on page 64.
Roam Option
You can restrict your phone from making a call
when roaming. See “Roam Option” on page 64.
Set roam ringer
You can set a ringer to indicate when an incoming
call is subject to roaming charges. See “Roam
Ringer” on page 55.
Set call guard
You can set the phone to warn you before you
answer or place a call while roaming. See “Roam
Call Alert” on page 65.
User Guide 15
Emergency services
Call emergency service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Send key.
Exit emergency services
When you have completed the emergency call:
1. Select Exit.
2. Select
Note: To determine who has access to your
location, see “Location” on page 64.
Exit again to confirm your choice.
Airplane Mode
While in an airplane, you can set your phone to
Airplane Mode where your phone does not emit
RF signals. See “Airplane Mode” on page 59.
16 Emergency services
4TEXT ENTRY
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner with
either QWERTY keypad (flip open) or the number
keypad (flip closed).
QWERTY keypad
Text entry modes
With the flip open, enter text with the
QWERTY keypad. The current text entry mode
(and capitalization setting, when applicable) are
indicated by icons.
The text entry screen has the following features:
1. The number of
remaining
characters you can
enter. Allowed
length of messages
can vary depending on your service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
There are six text entry modes:
Case Change
Normal Alpha
Rapid Entry
Numbers and Symbols
Add Symbol
Add Smiley
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you are in Numbers and Symbols
mode. When entering a name for a contact, you
are in Normal Alpha mode.
Enter numbers and symbols
• To enter a number or symbol while in
Numbers and Symbols mode, press the
appropriate key once.
• To enter a letter while in Numbers and
Symbols mode, press the
then press the appropriate key.
• To change to and from Numbers and Symbols
mode, press the
Symbol key once,
Symbol key twice.
User Guide 17
Enter word letter by letter
1. When entering text in Normal Alpha mode,
press the appropriate key once. If your
phone is set to Spanish, French, or
Portuguese, accented letters are available.
2. To enter a number or symbol while in
Normal Alpha mode, press the
Symbol key
once, then press the appropriate key.
3. To change to and from Normal Alpha mode,
press the
Symbol key twice.
Enter symbols
While entering text, you can enter many symbols
with the keypad. To access extra symbols:
1. From the text entry screen select
Add Symbol.
Options >
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbol to enter it.
Enter smileys
1. From the text entry screen select Options >
Add Smiley.
2. Scroll up or down to view the list of smileys.
3. Press the number key corresponding to the
smiley to enter it.
Change default text entry mode
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
Select
Menu > Messages > Msg Settings >
Default Text and one of the following:
•
Normal Alpha enter text in letter by letter.
•
Rapid Mode enter text with word recognition.
Change modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in Normal Alpha mode, you must change to
Numbers and Symbols mode, enter the numbers,
and then change back to Normal Alpha mode to
complete the address.
To change text entry modes, press the
Symbol key
twice, until the icon for the mode you want
appears at the top of the screen. You can also
select
Options and a different mode.
Capitalization
You can change capitalization at any time while
entering text. Simply press the
Shift key while in
Normal Alpha mode.
18 QWERTY keypad
Text entry quick reference
This table gives instructions for entering letters, numbers, and symbols.
To... Do this...
Enter a letter Use Normal Alpha mode and press a key until you see the letter you want.
Enter a number Use Numbers Only mode and press a key until you see the number you want.
Enter a symbol In either Normal Alpha or Numbers Only mode, press
Enter a smiley Use the Add Smiley feature.
Enter a space Press the
Erase a character Press the
Erase all characters Press and hold the
Move cursor right or left Scroll left or right.
Move cursor up or down Scroll up or down.
Change text entry modes Press the
Capitalize any letter In Normal Alpha mode, press the
Lowercase any letter In Normal Alpha mode, enter text if already in lowercase or press the
Initial caps In Normal Alpha mode, press the
Select soft options on screen Press the appropriate left or right softkey.
For more options, see “Text entry modes” on page 20.
For more options, see “Text entry modes” on page 20.
symbol you want. For more options, see “Text entry modes” on page 20.
Space key.
Back key.
Back key.
Symbol key twice.
Shift key to select uppercase if in
lowercase or enter text if already in uppercase.
key to select lowercase if in uppercase.
Shift key to select sentence case.
1 until you find the
Shift
User Guide 19
Loading...