Kyocera KR1 User Manual
Kyocera KR1 Mobile Router
User Guide
Kyocera Wireless Corp.
10300 Campus Point Drive
San Diego, CA 92121 U.S.A.
82-N8362-2EN, Rev.003
Kyocera Wireless Corp Proprietary
The Kyocera Wireless Corp. (“KWC”) products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United
States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted
software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore,
the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any
third party software provider, except for the normal, non-exclusive royalty-free license to use that arises by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation. D-link is a trademark of D-link Systems, Inc. Macintosh is a trademark Apple Computer Inc. Netscape and Netscape Navigator are
trademarks of Netscape Communications. All other trademarks are the property of their respective owners.
Copyright © 2006 Kyocera Wireless Corp. All rights reserved.
All data and information contained in or disclosed by this document are confidential and proprietary information of Kyocera Wireless Corp, and all rights therein are expressly reserved.
By accepting this material, the recipient agrees that this material and the information contained therein are held in confidence and in trust and will not be used, copied, or reproduced in whole or
in part, nor its contents revealed in any manner to others without the express written permission of Kyocera Wireless Corp.
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
82-N8362-2EN, Rev. 003
FCC COMPLIANCE STAT EMENT
FCC Notice:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and users’ authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Caution:
To comply with the FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Notice:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications
of the RSS210.
This class B device complies with Canadian ICES-003.
Cet appareil numérique de la classe B est confome à la norme NMB-003 du Canada.
Kyocera KR1 Mobile Router User Guide
Table of Contents
1 Introduction ................................................................................................................1
Connections–Kyocera KR1 Mobile Router (Back View) ........................................................................................................1
LEDs–Kyocera KR1 Mobile Router (Front View) ...................................................................................................................2
Features .............................................................................................................................................................................3
2 Package Contents .......................................................................................................4
System Requirements for Configuration .............................................................................................................................4
WiFi System Requirements ..................................................................................................................................................4
Verify Package Contents ....................................................................................................................................................4
3 Wireless Basics ............................................................................................................5
Standards-Based Technology .............................................................................................................................................5
Installation Considerations .................................................................................................................................................6
4 Installation Instructions .............................................................................................7
Connect the Kyocera KR1 Wireless Router to Your Network ...............................................................................................7
32-bit PCMCIA (EVDO) Card or 1xEV-DO Mobile Phone Connection ................................................................7
Establish WiFi Connection ................................................................................................................................ 7
5 Using the Configuration Menu..................................................................................8
Basic > Wizard ................................................................................................................................................. 9
Basic > Wireless (Security–No Encryption) ....................................................................................................... 10
Basic > Wireless (Security–WEP) ...................................................................................................................... 11
Basic > Wireless (Security–WPA-PSK) .............................................................................................................. 12
Basic > WAN (EVDO) > WAN Type .................................................................................................................. 13
Basic > LAN .................................................................................................................................................... 14
Basic > DHCP ................................................................................................................................................ 15
Advanced > Virtual Server ............................................................................................................................. 16
Advanced > Applications ................................................................................................................................ 18
Advanced > Filters > IP Filters ......................................................................................................................... 19
Advanced > Filters > MAC Filters .................................................................................................................... 20
Advanced > Firewall ....................................................................................................................................... 21
Advanced > DMZ ........................................................................................................................................... 22
Advanced > Performance ............................................................................................................................... 23
Advanced > WAN (EVDO) .............................................................................................................................. 25
Tools > Admin ................................................................................................................................................ 26
Tools > Time .................................................................................................................................................. 27
Tools > System ............................................................................................................................................... 28
Tools > Firmware ........................................................................................................................................... 29
Tools > DDNS ................................................................................................................................................. 30
Tools > Misc ................................................................................................................................................... 31
Tools > Cable Test .......................................................................................................................................... 32
iii
Status > Device Info ....................................................................................................................................... 33
Status > Log ................................................................................................................................................... 34
Status > Log > Log Settings #2 ....................................................................................................................... 35
Status > Log > Log Settings #3
A screen will display the Kyocera KR1 Mobile Router log settings. .................................................................. 36
Status > Stats ................................................................................................................................................ 37
Help > Help Menu .......................................................................................................................................... 38
6 Troubleshooting .......................................................................................................39
1. I am unable to access the Configuration Menu when I use my computer to configure
the router. Why? ........................................................................................................................................ 39
2. My wireless client cannot access the Internet. What should I do? ................................................................ 41
3. What variables may cause my wireless products to lose reception? .............................................................41
4. Why does my wireless connection keep dropping? ..................................................................................... 41
5. I am unable to achieve a wireless connection. Why? ................................................................................... 41
6. I forgot my encryption key. What should I do? ........................................................................................... 42
7. How do I reset my Kyocera KR1 Mobile Router to its factory default settings? ............................................ 43
8. What is VPN? ............................................................................................................................................. 43
9. What can I do if my Ethernet cable does not work properly? ...................................................................... 44
7 Technical Support .....................................................................................................45
Technical Support ............................................................................................................................................................45
Kyocera Accessories .........................................................................................................................................................45
8 Technical Specifications ...........................................................................................46
9 Consumer Limited Warranty (USA only).................................................................48
iv Kyocera KR1 Mobile Router User Guide
1Introduction
The Kyocera KR1 Mobile Router is a high-performance tool that supports wireless networking at home, work, or in
a public place. The Kyocera KR1 Mobile Router supports uses a 32-bit PCMCIA (EVDO) wireless card, or a 1xEV-DO
mobile phone, and supports wireless data transfers up to 54 Mbps, and wired data transfers up to 100 Mbps.
The Kyocera KR1 Mobile Router is compatible with industry security features.
Connections–Kyocera KR1 Mobile Router (Back View)
Antenna
Reset Button
Press this button to
restore the KR1 to
its original factory
default setting.
Receptor
for Power
Adapter
Phone In USB Port
Use the Phone In USB Port if a 1xEV-DO
mobile phone is your WAN connection.
Internal Diagnostic
LAN Ports
These ports automatically sense
the cable type when connecting to
Ethernet-enabled computers.
These are Auto MDI/MDIX ports.
WAN (EVDO) 32-bit PCMCIA Card Slot
Use this slot if a 32-bit PCMCIA card is
used for your WAN connection.
Note: The Kyocera KR1 Mobile Router contains two ports: a “Phone-In” USB Port, and a second internal diagnostic
port. Please use only the “Phone In” USB port for your 1xEV-DO WAN connections.
The second port is not for customer use. Please do not attempt to use this port.
Introduction 1
LEDs–Kyocera KR1 Mobile Router (Front View)
WLAN LED
A blinking green light indicates
WAN LED
A green light indicates
connection on the
(EVDO) port.
POWER LED
A green light indicates
connection to the
power supply.
that the connection on the
WLAN interface is available.
LOCAL NETWORK LEDs
A green light indicates a
connection to an Ethernet-enabled
computer (ports 1-4). This LED
blinks during data transmission.
ANTENNA
STATUS LED
A green light indicates the
KR1 is ready.
PHONE LED
A green light indicates connection to the
USB port (used when a 1xEV-DO mobile
phone is your WAN connection).
2 Kyocera KR1 Mobile Router User Guide
Features
• When used with either 802.11b, or 802.11g, security features include WPA-PSK: Pre Shared Key Mode.
This mode utilizes a single
• Fully compatible with the 802.11g standard to provide a wireless data transfer rate of up to 54Mbps.
• Backwards compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps.
• Utilizes
OFDM technology (Orthogonal Frequency Division Multiplexing).
• User-friendly configuration and diagnostic utilities.
• Operates in the 2.4GHz frequency range.
• Advanced Firewall features.
• Supports NAT with VPN pass-through, providing added security.
• MAC Filtering
• IP Filtering
• Port Scheduling
• DHCP server enables all networked computers to automatically receive IP addresses.
• Web-based interface for Managing and Configuring.
• Access Control to manage users on the network.
• Supports special applications that require multiple connections.
• Equipped with 4 10/100 Ethernet ports, 1 USB phone port, and 1 WAN (EVDO) 32-bit PCMCIA Card Slot.
• Connects multiple computers to a Broadband (EVDO) modem to share the Internet connection.
Note: The Kyocera KR1 Mobile Router is designed to work with EVDO-capable handsets that can be used as a
modem (support tethered data). Please refer to your service provider for detailed feature information.
Support is also available at http://www.kyocera-wireless.com/support
Passphrase of eight to 63 ASCII characters to authenticate users.
.
Introduction 3
2 Package Contents
System Requirements for Configuration
• A compatible 32-bit PCMCIA (EVDO) card with service, or a 1xEV-DO mobile phone with service.
Note: Subject to services and service terms available from your carrier.
• Computers with Windows, Macintosh, or Linux-based operating systems with an installed
Ethernet adapter.
• Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above.
WiFi System Requirements
• A 802.11b, or 802.11g Adapter
Verify Package Contents
The Kyocera KR1 Mobile Router package should contain the items listed below. If any of the items are missing,
please contact your reseller.
• Kyocera KR1 Mobile Router
• Kyocera KR1 Mobile Router User Guide (CD-ROM)
• Kyocera KR1 Mobile Router Quick Installation Guide
• Ethernet patch cable (CAT5 UTP)
• Mounting Kit
• Antenna
• DC 5V, 3.0A Power Adapter
• AC Power Cord
Caution: Using a power supply with a different voltage rating than the one included with the Kyocera KR1 Mobile
Router will cause damage and void the warranty for this product.
4 Kyocera KR1 Mobile Router User Guide
3 Wireless Basics
The Kyocera KR1 Mobile Router is based on industry standards to provide easy-to-use and compatible high-speed
wireless connectivity within your home, or business. The Kyocera KR1 Mobile Router allows you to access the data
you want, when and where you want it.
A WLAN (wireless local area network) transmits and receives data with radio signals instead of wires. WLANs are
used increasingly in both home and office environments, and public areas such as airports, coffee shops, and
universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more
efficiently. Increased mobility, and the absence of cabling and other fixed infrastructure, have proven beneficial for
many users.
Wireless users can use the same applications as those on a wired network. Wireless adapter cards for laptop and
desktop systems support the same protocols as Ethernet adapter cards.
People use wireless LAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location within the operating range of the
WLAN. Management decisions based on real-time information can significantly improve worker efficiency.
Low Implementation Costs - WLANs are easy to set up, manage, change, and relocate. Networks that frequently
change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of
wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy, and eliminate the need to pull
cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even
outside the home or office.
Inexpensive Solution - Wireless network devices are as competitively priced as conventional
Ethernet network devices.
Standards-Based Technology
The Kyocera KR1 Mobile Router utilizes the 802.11g standard.
The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54Mbps within
the 2.4GHz band, utilizing OFDM technology.
This means that in most environments, within the specified range of this device, you can transfer large files quickly
or even watch a movie in MPEG format over your network without noticeable delays. This technology works by
transmitting high-speed digital data over a radio wave utilizing
technology. OFDM splits the radio signal into multiple smaller sub-signals that transmit simultaneously at different
frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions.
The Kyocera KR1 Mobile Router is backwards compatible with 802.11b devices. This means that if you have an
existing 802.11b network, the devices in that network are compatible with 802.11g devices at speeds of up to
11Mbps in the 2.4GHz range.
OFDM (Orthogonal Frequency Division Multiplexing)
Wireless Basics 5
Installation Considerations
The Kyocera KR1 Mobile Router allows you access your network using a wireless connection, from virtually
anywhere within its operating range. Keep in mind however, that the number, thickness, and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit this range.
Typical ranges vary depending on the types of materials used, and background RF (radio frequency) noise in your
home or business.
To maximize your wireless range, please follow these guidelines:
1. Keep the number of walls and ceilings between the Kyocera KR1 Mobile Router and other network devices
to a minimum. Each wall or ceiling can reduce the Kyocera KR1 Mobile Router’s range from 3-90 feet
(1-30 meters).
Note: The same considerations apply to your broadband EVDO connection.
2. Keep your product aware from electrical devices (such as microwaves, air conditioners, and televisions) that
emit large quantities of RFI (Radio Frequency Interference).
6 Kyocera KR1 Mobile Router User Guide
4 Installation Instructions
Connect the Kyocera KR1 Wireless Router to Your Network
Note: Ensure that power to your Kyocera KR1 Mobile Router is not connected before performing the
installation steps below.
32-bit PCMCIA (EVDO) Card or 1xEV-DO Mobile Phone Connection
Note:
To preserve the life of your phone’s battery, it is recommended that you use your phone’s charging
cradle when connected to the Kyocera KR1 Mobile Router.
1. Attach the antenna.
a. Remove the antenna from its plastic wrapper.
b. Screw the antenna in a clockwise direction to the back panel of the unit.
c. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception.
2. Connect a compatible 32-bit PCMCIA (EVDO) card with service, or 1xEV-DO mobile phone with service, to
the Kyocera KR1 Mobile Router in one of the following ways:
a. Insert your wireless 32-bit PCMCIA (EVDO) card into the WAN (EVDO) 32-bit PCMCIA Card Slot, or
b. Connect your wireless 1xEV-DO mobile phone to the “Phone In” jack, with your USB phone cable.
Note:The Kyocera KR1 Mobile Router is designed to work with EVDO-capable handsets that can be used as
a modem (support tethered data). Please refer to your service provider for detailed feature
information. Support is also available at http://www.kyocera-wireless.com/support
.
3. Insert the Ethernet patch cable into LAN Port 1 on the back panel of the Kyocera KR1 Mobile Router, and an
available Ethernet port on the network adapter in the computer you will use to configure the unit.
Note:The Kyocera KR1 Mobile Router LAN Ports are “Auto-MDI/MDIX.” This provides either patch or
crossover Ethernet cable LAN Port access.
4. Connect the power adapter to the receptor on the back panel of your Kyocera KR1 Mobile Router.
Then plug the other end of the power adapter into a wall outlet or power strip.
a. The Power LED will turn ON to indicate power has been applied.
b. Other LEDs will flash ON and OFF as the Kyocera KR1 Mobile Router performs initialization and Internet
connection processes. This will take a few minutes.
c. When complete, the following LEDs will illuminate green: Power, Status, WAN, WLAN, and LAN Port 1
(or your specific LAN Port connection).
Note:For 1xEV-DO Phone Users if you have connected a 1xEV-DO mobile phone to your Kyocera KR1
Mobile Router, the Phone LED will also illuminate green.
Establish WiFi Connection
If you selected either WEP or WPA-PSK encryption, ensure these settings match your WiFi adapter settings.
WiFi and encryption settings must match for access to the Kyocera KR1 Mobile Router Configuration Menu, and the
Internet. Please refer to your WiFi adapter documentation for additional information.
Installation Instructions 7
5 Using the Configuration Menu
Once properly configured, the Kyocera KR1 Mobile Router will obtain and assign IP address information
automatically. Configuration settings can be established through the Kyocera KR1 Mobile Router Configuration
Menu. You can access this interface by performing the steps listed below:
1. Open a web-browser to http://www.kyocera-wireless.com,
(or your favorite web browser).
2. Type in the
(
http://192.168.0.1)
Note: If you have changed the default IP Address assigned to the
IP Address of the Kyocera KR1 Mobile Router
Kyocera KR1 Mobile Router, ensure you enter the correct IP
Address now.
3. Type
4. Leave the
5. Click
admin in the User Name field.
Password blank.
OK.
8 Kyocera KR1 Mobile Router User Guide
Basic > Wizard
The Basic>Wizard Type screen will appear.
Refer to the Kyocera KR1 Mobile Router Quick
Installation Guide for more information
regarding the Setup Wizard.
These buttons appear on many of the
configuration screens in this section.
Please click on the appropriate button at the
bottom of each screen after you make a
configuration change.
Clicking Apply saves changes made to the page.
Clicking
Clicking
Clicking
Cancel clears changes made to the page.
Help brings up helpful information regarding the page.
Restart restarts the router. (Necessary for some chang-
Using the Configuration Menu 9
Basic > Wireless (Security–No Encryption)
Wireless Mode-
SSID- Service Set Identifier (SSID) is the name designated for a specific wireless local area network
Enabled is the default . Selecting this option will allow you to set your Wireless Access Point
(WAP) settings. Selecting
“
Security” below).
(WLAN). The SSID's factory
Disabled, will grey-out all Security radio buttons (please see
default setting is KR1. The SSID can be easily changed to
establish a new wireless network.
(Note: SSID names may contain up to 32 ASCII characters).
Channel- Auto Select is the default . Devices on the network must share the same channel. (Note: Wireless
adapters automatically scan and match the wireless settings. You may also select the channel you
wish to use).
Security- You may select from three levels of encryption to secure your wireless network:
No Encryption, WEP, or WPA-PSK.
Security- No Encryption
10 Kyocera KR1 Mobile Router User Guide
is the default (as shown in the screen above).
Basic > Wireless (Security–WEP)
Security- WEP
Authentication-
You m ay se lec t Open System, or Shared Key. The default is Open System. If you select Open
System
, your network will not be secure. Select Shared Key to create a secure network
authentication between your WLAN host and the Kyocera KR1 Mobile Router. To enable this
setting, provide a ten-character (alpha-numeric) key in the
WEP Encryption-
Two levels or wireless encryption are available: 64-bit, and 128 bit. You may change the
encryption setting for a more secure wireless connection.
Key Type- Select 4HEX or ASCII.
Key1-Key4- Input up to 4 WEP keys; select the one you want to use.
ASCII Key field.
Using the Configuration Menu 11
Basic > Wireless (Security–WPA-PSK)
Security- WPA-PSK.
WPA-PSK
authenticates users based on a Passphrase. The default setting does not contain a Passphrase.
Passphrase- To enable your WPA-PSK, enter your eight to 63 alpha-numeric Passphrase.
Confirm Passphrase- Enter your Passphrase again to secure your wireless network.
Note: Some older WiFi adapters may not support WPA-PSK.
12 Kyocera KR1 Mobile Router User Guide
Loading...